From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski@linaro.org>,
<krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
<vladimir.oltean@nxp.com>, <grygorii.strashko@ti.com>,
<vigneshr@ti.com>, <nsekhar@ti.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <kishon@ti.com>,
<s-vadapalli@ti.com>
Subject: [PATCH v5 0/3] J7200: CPSW5G: Add support for QSGMII mode to am65-cpsw driver
Date: Mon, 22 Aug 2022 12:31:22 +0530 [thread overview]
Message-ID: <20220822070125.28236-1-s-vadapalli@ti.com> (raw)
Add support for QSGMII mode to am65-cpsw driver.
Change log:
v4-> v5:
1. Move ti,j7200-cpswxg-nuss compatible to the line above the
ti,j721e-cpsw-nuss compatible.
2. Add allOf and move if-then statements within it to allow future if-then
statements to be added easily.
v3 -> v4:
1. Update bindings to disallow ports based on compatible, instead of
adding a new if/then statement for the new compatible.
2. Add Else-If condition for RMII mode in the set of supported interfaces.
Support for RMII mode is already present in the driver and I had
missed out adding a condition for RMII mode in the previous patches.
v2 -> v3:
1. In ti,k3-am654-cpsw-nuss.yaml, restrict if/then statement to port
nodes.
v1 -> v2:
1. Add new compatible for CPSW5G in ti,k3-am654-cpsw-nuss.yaml and extend
properties for new compatible.
2. Add extra_modes member to struct am65_cpsw_pdata to be used for QSGMII
mode by new compatible.
3. Add check for phylink supported modes to ensure that only one phy mode
is advertised as supported.
4. Check if extra_modes supports QSGMII mode in am65_cpsw_nuss_mac_config()
for register write.
5. Add check for assigning port->sgmii_base only when extra_modes is valid.
v4: https://lore.kernel.org/r/20220816060139.111934-1-s-vadapalli@ti.com/
v3: https://lore.kernel.org/r/20220606110443.30362-1-s-vadapalli@ti.com/
v2: https://lore.kernel.org/r/20220602114558.6204-1-s-vadapalli@ti.com/
v1: https://lore.kernel.org/r/20220531113058.23708-1-s-vadapalli@ti.com/
Siddharth Vadapalli (3):
dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200
CPSW5G
net: ethernet: ti: am65-cpsw: Add support for J7200 CPSW5G
net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct
location
.../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 18 +++++++-
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 44 ++++++++++++++++---
drivers/net/ethernet/ti/am65-cpsw-nuss.h | 2 +
3 files changed, 55 insertions(+), 9 deletions(-)
--
2.25.1
next reply other threads:[~2022-08-22 7:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-22 7:01 Siddharth Vadapalli [this message]
2022-08-22 7:01 ` [PATCH v5 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G Siddharth Vadapalli
2022-08-22 21:42 ` Rob Herring
2022-08-22 7:01 ` [PATCH v5 2/3] net: ethernet: ti: am65-cpsw: Add support " Siddharth Vadapalli
2022-08-22 7:01 ` [PATCH v5 3/3] net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct location Siddharth Vadapalli
2022-08-24 9:00 ` [PATCH v5 0/3] J7200: CPSW5G: Add support for QSGMII mode to am65-cpsw driver patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220822070125.28236-1-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=grygorii.strashko@ti.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®