From: wei.fang@nxp.com
To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net] net: fec: add pm_qos support on imx6q platform
Date: Tue, 30 Aug 2022 15:01:48 +0800 [thread overview]
Message-ID: <20220830070148.2021947-1-wei.fang@nxp.com> (raw)
From: Wei Fang <wei.fang@nxp.com>
There is a very low probability that tx timeout will occur during
suspend and resume stress test on imx6q platform. So we add pm_qos
support to prevent system from entering low level idles which may
affect the transmission of tx.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/fec.h | 5 +++++
drivers/net/ethernet/freescale/fec_main.c | 9 ++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index ed7301b69169..a5fed00cb971 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -16,6 +16,7 @@
#include <linux/clocksource.h>
#include <linux/net_tstamp.h>
+#include <linux/pm_qos.h>
#include <linux/ptp_clock_kernel.h>
#include <linux/timecounter.h>
@@ -498,6 +499,9 @@ struct bufdesc_ex {
/* i.MX8MQ SoC integration mix wakeup interrupt signal into "int2" interrupt line. */
#define FEC_QUIRK_WAKEUP_FROM_INT2 (1 << 22)
+/* i.MX6Q adds pm_qos support */
+#define FEC_QUIRK_HAS_PMQOS BIT(23)
+
struct bufdesc_prop {
int qid;
/* Address of Rx and Tx buffers */
@@ -608,6 +612,7 @@ struct fec_enet_private {
struct delayed_work time_keep;
struct regulator *reg_phy;
struct fec_stop_mode_gpr stop_gpr;
+ struct pm_qos_request pm_qos_req;
unsigned int tx_align;
unsigned int rx_align;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index f5f34cdba131..bcc441d9a499 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -111,7 +111,8 @@ static const struct fec_devinfo fec_imx6q_info = {
.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
- FEC_QUIRK_HAS_RACC | FEC_QUIRK_CLEAR_SETUP_MII,
+ FEC_QUIRK_HAS_RACC | FEC_QUIRK_CLEAR_SETUP_MII |
+ FEC_QUIRK_HAS_PMQOS,
};
static const struct fec_devinfo fec_mvf600_info = {
@@ -3218,6 +3219,9 @@ fec_enet_open(struct net_device *ndev)
if (fep->quirks & FEC_QUIRK_ERR006687)
imx6q_cpuidle_fec_irqs_used();
+ if (fep->quirks & FEC_QUIRK_HAS_PMQOS)
+ cpu_latency_qos_add_request(&fep->pm_qos_req, 0);
+
napi_enable(&fep->napi);
phy_start(ndev->phydev);
netif_tx_start_all_queues(ndev);
@@ -3259,6 +3263,9 @@ fec_enet_close(struct net_device *ndev)
fec_enet_update_ethtool_stats(ndev);
fec_enet_clk_enable(ndev, false);
+ if (fep->quirks & FEC_QUIRK_HAS_PMQOS)
+ cpu_latency_qos_remove_request(&fep->pm_qos_req);
+
pinctrl_pm_select_sleep_state(&fep->pdev->dev);
pm_runtime_mark_last_busy(&fep->pdev->dev);
pm_runtime_put_autosuspend(&fep->pdev->dev);
--
2.25.1
next reply other threads:[~2022-08-30 7:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 7:01 wei.fang [this message]
2022-09-01 2:36 ` Jakub Kicinski
2022-09-01 4:46 ` Wei Fang
2022-09-01 7:17 ` Paolo Abeni
2022-09-01 20:10 ` Jakub Kicinski
2022-09-02 2:05 ` Wei Fang
2022-09-03 4:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220830070148.2021947-1-wei.fang@nxp.com \
--to=wei.fang@nxp.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®