From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
aisheng.dong@nxp.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V3 7/8] arm64: dts: imx93: add lpi2c nodes
Date: Wed, 31 Aug 2022 22:14:17 +0800 [thread overview]
Message-ID: <20220831141418.38532-8-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20220831141418.38532-1-peng.fan@oss.nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Add i.MX93 lpi2c nodes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
binding doc accepeted:
https://lore.kernel.org/all/Yw3hfcQ2JV248GIo@shikoro/
arch/arm64/boot/dts/freescale/imx93.dtsi | 89 ++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index f007314d8f1e..58f36897bc5f 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -16,6 +16,14 @@ / {
#size-cells = <2>;
aliases {
+ i2c0 = &lpi2c1;
+ i2c1 = &lpi2c2;
+ i2c2 = &lpi2c3;
+ i2c3 = &lpi2c4;
+ i2c4 = &lpi2c5;
+ i2c5 = &lpi2c6;
+ i2c6 = &lpi2c7;
+ i2c7 = &lpi2c8;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -138,6 +146,26 @@ system_counter: timer@44290000 {
clock-names = "per";
};
+ lpi2c1: i2c@44340000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x44340000 0x10000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+ <&clk IMX93_CLK_BUS_AON>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
+ lpi2c2: i2c@44350000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x44350000 0x10000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+ <&clk IMX93_CLK_BUS_AON>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
lpuart1: serial@44380000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x44380000 0x1000>;
@@ -197,6 +225,26 @@ mu2: mailbox@42440000 {
status = "disabled";
};
+ lpi2c3: i2c@42530000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x42530000 0x10000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
+ lpi2c4: i2c@42540000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x42540000 0x10000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
lpuart3: serial@42570000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42570000 0x1000>;
@@ -250,6 +298,47 @@ lpuart8: serial@426a0000 {
clock-names = "ipg";
status = "disabled";
};
+
+ lpi2c5: i2c@426b0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426b0000 0x10000>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
+ lpi2c6: i2c@426c0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426c0000 0x10000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
+ lpi2c7: i2c@426d0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426d0000 0x10000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
+ lpi2c8: i2c@426e0000 {
+ compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x426e0000 0x10000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+ <&clk IMX93_CLK_BUS_WAKEUP>;
+ clock-names = "per", "ipg";
+ status = "disabled";
+ };
+
};
aips3: bus@42800000 {
--
2.37.1
next prev parent reply other threads:[~2022-08-31 14:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-31 14:14 [PATCH V3 0/8] arm64: dts: imx93: add several nodes Peng Fan (OSS)
2022-08-31 14:14 ` [PATCH V3 1/8] dt-bindings: soc: imx: add binding for i.MX93 syscon Peng Fan (OSS)
2022-09-02 20:57 ` Rob Herring
2022-09-05 0:57 ` Peng Fan
2022-08-31 14:14 ` [PATCH V3 2/8] arm64: dts: imx93: correct SDHC clk entry Peng Fan (OSS)
2022-08-31 14:14 ` [PATCH V3 3/8] arm64: dts: imx93: add gpio clk Peng Fan (OSS)
2022-08-31 14:14 ` [PATCH V3 4/8] arm64: dts: imx93: add s4 mu node Peng Fan (OSS)
2022-09-05 3:05 ` Shawn Guo
2022-08-31 14:14 ` [PATCH V3 5/8] arm64: dts: imx93: add blk ctrl node Peng Fan (OSS)
2022-08-31 14:14 ` [PATCH V3 6/8] arm64: dts: imx93: add a55 pmu Peng Fan (OSS)
2022-08-31 14:14 ` Peng Fan (OSS) [this message]
2022-08-31 14:14 ` [PATCH V3 8/8] arm64: dts: imx93: add lpspi nodes Peng Fan (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220831141418.38532-8-peng.fan@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®