[PATCH v2 net-next 1/2] net: mscc: ocelot: utilize readx_poll_timeout() for chip reset

[Colin Foster <colin.foster@in-advantage.com>]

Clean up the reset code by utilizing readx_poll_timeout instead of a custom
loop.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
---

v2:
    Remove IS_ERR_VALUE macro compile error for 64-bit
    Add Reviewed and Reported tags

---
 drivers/net/ethernet/mscc/ocelot_vsc7514.c | 32 ++++++++++++++++------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
index ae42bbba5747..3fb9183c1159 100644
--- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
+++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
@@ -6,6 +6,7 @@
  */
 #include <linux/dsa/ocelot.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_net.h>
 #include <linux/netdevice.h>
@@ -25,6 +26,9 @@
 #define VSC7514_VCAP_POLICER_BASE			128
 #define VSC7514_VCAP_POLICER_MAX			191
 
+#define MEM_INIT_SLEEP_US				1000
+#define MEM_INIT_TIMEOUT_US				100000
+
 static const u32 *ocelot_regmap[TARGET_MAX] = {
 	[ANA] = vsc7514_ana_regmap,
 	[QS] = vsc7514_qs_regmap,
@@ -191,22 +195,32 @@ static const struct of_device_id mscc_ocelot_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mscc_ocelot_match);
 
+static int ocelot_mem_init_status(struct ocelot *ocelot)
+{
+	unsigned int val;
+	int err;
+
+	err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
+				&val);
+
+	return err ?: val;
+}
+
 static int ocelot_reset(struct ocelot *ocelot)
 {
-	int retries = 100;
+	int err;
 	u32 val;
 
 	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
 	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
 
-	do {
-		msleep(1);
-		regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
-				  &val);
-	} while (val && --retries);
-
-	if (!retries)
-		return -ETIMEDOUT;
+	/* MEM_INIT is a self-clearing bit. Wait for it to be cleared (should be
+	 * 100us) before enabling the switch core.
+	 */
+	err = readx_poll_timeout(ocelot_mem_init_status, ocelot, val, !val,
+				 MEM_INIT_SLEEP_US, MEM_INIT_TIMEOUT_US);
+	if (err)
+		return err;
 
 	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
 	regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
-- 
2.25.1