[PATCH] media: i2c: hi846: Fix memory leak in hi846_parse_dt()

[Rafael Mendonca <rafaelmendsr@gmail.com>]

If any of the checks related to the supported link frequencies fail, then
the V4L2 fwnode resources don't get released before returning, which leads
to a memleak. Fix this by properly freeing the V4L2 fwnode data in a
designated label.

Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
---
 drivers/media/i2c/hi846.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/hi846.c b/drivers/media/i2c/hi846.c
index ad35c3ff3611..254031503c72 100644
--- a/drivers/media/i2c/hi846.c
+++ b/drivers/media/i2c/hi846.c
@@ -2008,22 +2008,24 @@ static int hi846_parse_dt(struct hi846 *hi846, struct device *dev)
 	    bus_cfg.bus.mipi_csi2.num_data_lanes != 4) {
 		dev_err(dev, "number of CSI2 data lanes %d is not supported",
 			bus_cfg.bus.mipi_csi2.num_data_lanes);
-		v4l2_fwnode_endpoint_free(&bus_cfg);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto check_hwcfg_error;
 	}
 
 	hi846->nr_lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
 
 	if (!bus_cfg.nr_of_link_frequencies) {
 		dev_err(dev, "link-frequency property not found in DT\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto check_hwcfg_error;
 	}
 
 	/* Check that link frequences for all the modes are in device tree */
 	fq = hi846_check_link_freqs(hi846, &bus_cfg);
 	if (fq) {
 		dev_err(dev, "Link frequency of %lld is not supported\n", fq);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto check_hwcfg_error;
 	}
 
 	v4l2_fwnode_endpoint_free(&bus_cfg);
@@ -2044,6 +2046,10 @@ static int hi846_parse_dt(struct hi846 *hi846, struct device *dev)
 	}
 
 	return 0;
+
+check_hwcfg_error:
+	v4l2_fwnode_endpoint_free(&bus_cfg);
+	return ret;
 }
 
 static int hi846_probe(struct i2c_client *client)
-- 
2.34.1