From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
"Jiri Slaby" <jslaby@suse.cz>
Subject: [PATCH v4 06/10] tty: serial: switch mpc52xx_uart_int_{r,t}x_chars() to bool
Date: Tue, 20 Sep 2022 07:20:46 +0200 [thread overview]
Message-ID: <20220920052049.20507-7-jslaby@suse.cz> (raw)
In-Reply-To: <20220920052049.20507-1-jslaby@suse.cz>
mpc52xx_uart_int_rx_chars() returns unsigned int.
mpc52xx_uart_int_tx_chars() returns int.
The both results are binary ORed to the "keepgoing" variable. Unify all
three to bool as the only interesting value is whether we should keep
looping (true/false).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
Notes:
[v4] this is new in v4 -- extracted as a separate change
drivers/tty/serial/mpc52xx_uart.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 6f09b1cb3e1c..73362d4bc45d 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1364,7 +1364,7 @@ static const struct uart_ops mpc52xx_uart_ops = {
/* Interrupt handling */
/* ======================================================================== */
-static inline unsigned int
+static inline bool
mpc52xx_uart_int_rx_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
@@ -1425,7 +1425,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
return psc_ops->raw_rx_rdy(port);
}
-static inline int
+static inline bool
mpc52xx_uart_int_tx_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
@@ -1435,13 +1435,13 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
psc_ops->write_char(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
- return 1;
+ return true;
}
/* Nothing to do ? */
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
mpc52xx_uart_stop_tx(port);
- return 0;
+ return false;
}
/* Send chars */
@@ -1460,23 +1460,23 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
/* Maybe we're done after all */
if (uart_circ_empty(xmit)) {
mpc52xx_uart_stop_tx(port);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static irqreturn_t
mpc5xxx_uart_process_int(struct uart_port *port)
{
unsigned long pass = ISR_PASS_LIMIT;
- unsigned int keepgoing;
+ bool keepgoing;
u8 status;
/* While we have stuff to do, we continue */
do {
/* If we don't find anything to do, we stop */
- keepgoing = 0;
+ keepgoing = false;
psc_ops->rx_clr_irq(port);
if (psc_ops->rx_rdy(port))
@@ -1495,7 +1495,7 @@ mpc5xxx_uart_process_int(struct uart_port *port)
/* Limit number of iteration */
if (!(--pass))
- keepgoing = 0;
+ keepgoing = false;
} while (keepgoing);
--
2.37.3
next prev parent reply other threads:[~2022-09-20 5:21 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 5:20 [PATCH v4 00/10] tty: TX helpers Jiri Slaby
2022-09-20 5:20 ` [PATCH v4 01/10] tty: serial: move and cleanup vt8500_tx_empty() Jiri Slaby
2022-09-20 7:53 ` Ilpo Järvinen
2022-09-20 5:20 ` [PATCH v4 02/10] tty: serial: clean up stop-tx part in altera_uart_tx_chars() Jiri Slaby
2022-09-20 8:03 ` Ilpo Järvinen
2022-09-20 14:17 ` Tobias Klauser
2022-09-20 5:20 ` [PATCH v4 03/10] tty: serial: altera_uart_{r,t}x_chars() need only uart_port Jiri Slaby
2022-09-20 8:04 ` Ilpo Järvinen
2022-09-20 14:15 ` Tobias Klauser
2022-09-20 5:20 ` [PATCH v4 04/10] tty: serial: extract lqasc_tx_ready() from lqasc_tx_chars() Jiri Slaby
2022-09-20 8:03 ` Ilpo Järvinen
2022-09-20 5:20 ` [PATCH v4 05/10] tty: serial: extract tx_ready() from __serial_lpc32xx_tx() Jiri Slaby
2022-09-20 8:11 ` Ilpo Järvinen
2022-09-20 5:20 ` Jiri Slaby [this message]
2022-09-20 8:37 ` [PATCH v4 06/10] tty: serial: switch mpc52xx_uart_int_{r,t}x_chars() to bool Ilpo Järvinen
2022-09-20 5:20 ` [PATCH v4 07/10] tty: serial: extract serial_omap_put_char() from transmit_chars() Jiri Slaby
2022-09-20 8:37 ` Ilpo Järvinen
2022-09-20 5:20 ` [PATCH v4 08/10] tty: serial: introduce transmit helpers Jiri Slaby
2022-09-20 8:43 ` Ilpo Järvinen
2022-09-20 5:20 ` [PATCH v4 09/10] tty: serial: use uart_port_tx() helper Jiri Slaby
2022-09-20 8:54 ` Ilpo Järvinen
2022-09-20 8:56 ` Jiri Slaby
2022-09-20 7:58 ` [PATCH v4 10/10] tty: serial: use uart_port_tx_limited() Jiri Slaby
2022-09-20 9:19 ` Ilpo Järvinen
2022-09-20 10:58 ` Jiri Slaby
2022-09-22 14:15 ` [PATCH v4 00/10] tty: TX helpers Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220920052049.20507-7-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®