[PATCH v2] watchdog: sp5100_tco: Add "action" module parameter

[Vladimir Panteleev <git@vladimir.panteleev.md>]

Allow configuring the "action" bit, as documented in [1].

Previously, the only action supported by this module was to reset the
system (0).  It can now be configured to power off (1) instead.

[1]: https://www.amd.com/system/files/TechDocs/44413.pdf

Signed-off-by: Vladimir Panteleev <git@vladimir.panteleev.md>
---

Changes since v1:
 - Drop the rename of the SP5100_WDT_ACTION_RESET define
 - Make the new parameter not visible in sysfs for consistency

 drivers/watchdog/sp5100_tco.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index ae54dd33e233..fb426b7d81da 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -65,6 +65,12 @@ static struct pci_dev *sp5100_tco_pci;
 
 /* module parameters */
 
+#define WATCHDOG_ACTION 0
+static bool action = WATCHDOG_ACTION;
+module_param(action, bool, 0);
+MODULE_PARM_DESC(action, "Action taken when watchdog expires, 0 to reset, 1 to poweroff (default="
+		 __MODULE_STRING(WATCHDOG_ACTION) ")");
+
 #define WATCHDOG_HEARTBEAT 60	/* 60 sec default heartbeat. */
 static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
 module_param(heartbeat, int, 0);
@@ -297,8 +303,11 @@ static int sp5100_tco_timer_init(struct sp5100_tco *tco)
 	if (val & SP5100_WDT_FIRED)
 		wdd->bootstatus = WDIOF_CARDRESET;
 
-	/* Set watchdog action to reset the system */
-	val &= ~SP5100_WDT_ACTION_RESET;
+	/* Set watchdog action */
+	if (action)
+		val |= SP5100_WDT_ACTION_RESET;
+	else
+		val &= ~SP5100_WDT_ACTION_RESET;
 	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
 
 	/* Set a reasonable heartbeat before we stop the timer */
-- 
2.37.3