[PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al.

[Marcel Ziswiler <marcel@ziswiler.com>]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


This series is an assortment of USB dual-role specific commits as
follows:

Introduce USBC_DET GPIO based USB dual-role aka device/host switching.

Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.

Specify USBH_PEN GPIO being active-low rather than active-high
(cosmetic only).

Remove spurious debounce property from linux,extcon-usb-gpio. That
commit is actually for Colibri iMX7.

Changes in v2:
- Dropped fixes tag as this change is rather cosmetic.
- Add new commit also actually enabling CONFIG_EXTCON_USB_GPIO.

Marcel Ziswiler (4):
  arm: dts: colibri-imx6: move vbus-supply to module level device tree
  arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
  arm: dts: imx7-colibri: remove spurious debounce property
  ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support

Philippe Schenker (1):
  arm: dts: colibri-imx6: usb dual-role switching

 arch/arm/boot/dts/imx6dl-colibri-aster.dts   |  1 -
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts |  1 -
 arch/arm/boot/dts/imx6dl-colibri-iris.dts    |  1 -
 arch/arm/boot/dts/imx6qdl-colibri.dtsi       | 22 ++++++++++++++++----
 arch/arm/boot/dts/imx7-colibri.dtsi          |  1 -
 arch/arm/configs/imx_v6_v7_defconfig         |  1 +
 6 files changed, 19 insertions(+), 8 deletions(-)

-- 
2.36.1