Re: [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe controller on rock3a

[Chukun Pan <amadeus@jmu.edu.cn>]

Hi,

On 27-09-22, 18:47, Robin Murphy wrote:

> (as a side note, is pcie2x1's vpcie3v3-supply as queued in -next 
> actually correct? AFAICS the other socket is effectively powered 
> straight from VCC3V3_SYS so shouldn't have needed VCC3V3_PCIE,
> but at least it's there now ready for this one)

Thanks for the correction, I didn't notice this before. You are right,
the supply of pcie2x1 comes from VCC3V3_SYS. But if we change supply
of pcie2x1 to VCC3V3_SYS, it will cause pcie30phy to fail to initialize
normally. The error is the same as the following:

> phy phy-fe8c0000.phy.4: rockchip_p3phy_rk3568_init: lock
> failed 0x6890000, check input refclk and power supply
> phy phy-fe8c0000.phy.4: phy init failed --> -110
> rockchip-dw-pcie: probe of 3c0800000.pcie failed with error -110

If both vpcie3v3-supply of pcie2x1 and pcie3x2 use VCC3V3_PCIE like
the vendor kernel, they can initialized normally.

Thanks,
Chukun

-- 
2.25.1