mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>
Cc: Vladimir Zapolskiy <vz@mleia.com>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] mtd: rawnand: lpc32xx_mlc: switch to using gpiod API
Date: Wed, 28 Sep 2022 16:00:18 -0700	[thread overview]
Message-ID: <20220928230019.2140896-1-dmitry.torokhov@gmail.com> (raw)

This switches the driver from legacy gpio API to a newer gpiod API.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/mtd/nand/raw/lpc32xx_mlc.c | 36 ++++++++++++++++--------------
 1 file changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 452ecaf7775a..306e2c216501 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -25,7 +25,7 @@
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mtd/lpc32xx_mlc.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -122,7 +122,6 @@ struct lpc32xx_nand_cfg_mlc {
 	uint32_t rd_low;
 	uint32_t wr_high;
 	uint32_t wr_low;
-	int wp_gpio;
 	struct mtd_partition *parts;
 	unsigned num_parts;
 };
@@ -177,6 +176,7 @@ struct lpc32xx_nand_host {
 	struct nand_chip	nand_chip;
 	struct lpc32xx_mlc_platform_data *pdata;
 	struct clk		*clk;
+	struct gpio_desc	*wp_gpio;
 	void __iomem		*io_base;
 	int			irq;
 	struct lpc32xx_nand_cfg_mlc	*ncfg;
@@ -370,8 +370,8 @@ static int lpc32xx_waitfunc(struct nand_chip *chip)
  */
 static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
 {
-	if (gpio_is_valid(host->ncfg->wp_gpio))
-		gpio_set_value(host->ncfg->wp_gpio, 0);
+	if (host->wp_gpio)
+		gpiod_set_value_cansleep(host->wp_gpio, 1);
 }
 
 /*
@@ -379,8 +379,8 @@ static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
  */
 static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
 {
-	if (gpio_is_valid(host->ncfg->wp_gpio))
-		gpio_set_value(host->ncfg->wp_gpio, 1);
+	if (host->wp_gpio)
+		gpiod_set_value_cansleep(host->wp_gpio, 0);
 }
 
 static void lpc32xx_dma_complete_func(void *completion)
@@ -636,8 +636,6 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
 		return NULL;
 	}
 
-	ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
-
 	return ncfg;
 }
 
@@ -713,14 +711,18 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 			"Missing or bad NAND config from device tree\n");
 		return -ENOENT;
 	}
-	if (host->ncfg->wp_gpio == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-	if (gpio_is_valid(host->ncfg->wp_gpio) &&
-			gpio_request(host->ncfg->wp_gpio, "NAND WP")) {
-		dev_err(&pdev->dev, "GPIO not available\n");
-		return -EBUSY;
+
+	/* Start with WP disabled, if available */
+	host->wp_gpio = gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW);
+	res = PTR_ERR_OR_ZERO(host->wp_gpio);
+	if (res) {
+		if (res != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "WP GPIO is not available: %d\n",
+				res);
+		return res;
 	}
-	lpc32xx_wp_disable(host);
+
+	gpiod_set_consumer_name(host->wp_gpio, "NAND WP");
 
 	host->pdata = dev_get_platdata(&pdev->dev);
 
@@ -817,7 +819,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	clk_put(host->clk);
 free_gpio:
 	lpc32xx_wp_enable(host);
-	gpio_free(host->ncfg->wp_gpio);
+	gpiod_put(host->wp_gpio);
 
 	return res;
 }
@@ -843,7 +845,7 @@ static int lpc32xx_nand_remove(struct platform_device *pdev)
 	clk_put(host->clk);
 
 	lpc32xx_wp_enable(host);
-	gpio_free(host->ncfg->wp_gpio);
+	gpiod_put(host->wp_gpio);
 
 	return 0;
 }
-- 
2.38.0.rc1.362.ged0d419d3c-goog


             reply	other threads:[~2022-09-28 23:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-28 23:00 Dmitry Torokhov [this message]
2022-09-28 23:00 ` [PATCH 2/2] mtd: rawnand: lpc32xx_slc: " Dmitry Torokhov
2022-10-18  9:04   ` Miquel Raynal
2022-10-18  9:04 ` [PATCH 1/2] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220928230019.2140896-1-dmitry.torokhov@gmail.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vz@mleia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®