mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Angus Chen <angus.chen@jaguarmicro.com>
To: jasowang@redhat.com, mst@redhat.com
Cc: virtualization@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org,
	Angus Chen <angus.chen@jaguarmicro.com>
Subject: [PATCH v3] virtio_pci: avoid to request intx irq if pin is zero
Date: Fri, 30 Sep 2022 08:09:15 +0800	[thread overview]
Message-ID: <20220930000915.548-1-angus.chen@jaguarmicro.com> (raw)

The background is that we use dpu in cloud computing,the arch is x86,80
cores.We will have a lots of virtio devices,like 512 or more.
When we probe about 200 virtio_blk devices,it will fail and
the stack is print as follows:

[25338.485128] virtio-pci 0000:b3:00.0: virtio_pci: leaving for legacy driver
[25338.496174] genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)
[25338.503822] CPU: 20 PID: 5431 Comm: kworker/20:0 Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-305.30.1.el8.x86_64
[25338.516403] Hardware name: Inspur NF5280M5/YZMB-00882-10E, BIOS 4.1.21 08/25/2021
[25338.523881] Workqueue: events work_for_cpu_fn
[25338.528235] Call Trace:
[25338.530687]  dump_stack+0x5c/0x80
[25338.534000]  __setup_irq.cold.53+0x7c/0xd3
[25338.538098]  request_threaded_irq+0xf5/0x160
[25338.542371]  vp_find_vqs+0xc7/0x190
[25338.545866]  init_vq+0x17c/0x2e0 [virtio_blk]
[25338.550223]  ? ncpus_cmp_func+0x10/0x10
[25338.554061]  virtblk_probe+0xe6/0x8a0 [virtio_blk]
[25338.558846]  virtio_dev_probe+0x158/0x1f0
[25338.562861]  really_probe+0x255/0x4a0
[25338.566524]  ? __driver_attach_async_helper+0x90/0x90
[25338.571567]  driver_probe_device+0x49/0xc0
[25338.575660]  bus_for_each_drv+0x79/0xc0
[25338.579499]  __device_attach+0xdc/0x160
[25338.583337]  bus_probe_device+0x9d/0xb0
[25338.587167]  device_add+0x418/0x780
[25338.590654]  register_virtio_device+0x9e/0xe0
[25338.595011]  virtio_pci_probe+0xb3/0x140
[25338.598941]  local_pci_probe+0x41/0x90
[25338.602689]  work_for_cpu_fn+0x16/0x20
[25338.606443]  process_one_work+0x1a7/0x360
[25338.610456]  ? create_worker+0x1a0/0x1a0
[25338.614381]  worker_thread+0x1cf/0x390
[25338.618132]  ? create_worker+0x1a0/0x1a0
[25338.622051]  kthread+0x116/0x130
[25338.625283]  ? kthread_flush_work_fn+0x10/0x10
[25338.629731]  ret_from_fork+0x1f/0x40
[25338.633395] virtio_blk: probe of virtio418 failed with error -16

The log :
"genirq: Flags mismatch irq 0. 00000080 (virtio418) vs. 00015a00 (timer)"
was print because of the irq 0 is used by timer exclusive,and when
vp_find_vqs call vp_find_vqs_msix and return false twice for
whatever reason,then it will call vp_find_vqs_intx for the last try.
Because vp_dev->pci_dev->irq is zero,so it will be request irq 0 with
flag IRQF_SHARED,we will get a backtrace like above.

According to PCI spec about "Interrupt Pin" Register (Offset 3Dh):
"The Interrupt Pin register is a read-only register that identifies the
 legacy interrupt Message(s) the Function uses. Valid values are 01h, 02h,
 03h, and 04h that map to legacy interrupt Messages for INTA,
 INTB, INTC, and INTD respectively. A value of 00h indicates that the
 Function uses no legacy interrupt Message(s)."

So if vp_dev->pci_dev->pin is zero, we should not request legacy
interrupt.

Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
---
v3:
- add quotes of PCI spec
- Move the judgment from vp_find_vqs_intx to vp_find_vqs

v2:
- Decide whether to request an intx interrupt by pin instead of irq
- suggested by mst

v1:https://lore.kernel.org/virtualization/20220928000228-mutt-send-email-mst@kernel.org/T/#u

 drivers/virtio/virtio_pci_common.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
index ad258a9d3b9f..44a839127f2b 100644
--- a/drivers/virtio/virtio_pci_common.c
+++ b/drivers/virtio/virtio_pci_common.c
@@ -409,6 +409,9 @@ int vp_find_vqs(struct virtio_device *vdev, unsigned int nvqs,
 	err = vp_find_vqs_msix(vdev, nvqs, vqs, callbacks, names, false, ctx, desc);
 	if (!err)
 		return 0;
+	/* Is there an interrupt pin? If not give up. */
+	if (!(to_vp_device(vdev)->pci_dev->pin))
+		return err;
 	/* Finally fall back to regular interrupts. */
 	return vp_find_vqs_intx(vdev, nvqs, vqs, callbacks, names, ctx);
 }
-- 
2.17.1


             reply	other threads:[~2022-09-30  0:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-30  0:09 Angus Chen [this message]
  -- strict thread matches above, loose matches on Subject: below --
2022-09-28 10:46 Angus Chen
2022-09-29  2:30 ` Jason Wang
2022-10-05  2:20   ` Angus Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220930000915.548-1-angus.chen@jaguarmicro.com \
    --to=angus.chen@jaguarmicro.com \
    --cc=jasowang@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®