From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Li RongQing <lirongqing@baidu.com>
Subject: [PATCH v4 08/32] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode
Date: Sat, 1 Oct 2022 00:58:51 +0000 [thread overview]
Message-ID: <20221001005915.2041642-9-seanjc@google.com> (raw)
In-Reply-To: <20221001005915.2041642-1-seanjc@google.com>
Move the VMCB updates from avic_refresh_apicv_exec_ctrl() into
avic_set_virtual_apic_mode() and invert the dependency being said
functions to avoid calling avic_vcpu_{load,put}() and
avic_set_pi_irte_mode() when "only" setting the virtual APIC mode.
avic_set_virtual_apic_mode() is invoked from common x86 with preemption
enabled, which makes avic_vcpu_{load,put}() unhappy. Luckily, calling
those and updating IRTE stuff is unnecessary as the only reason
avic_set_virtual_apic_mode() is called is to handle transitions between
xAPIC and x2APIC that don't also toggle APICv activation. And if
activation doesn't change, there's no need to fiddle with the physical
APIC ID table or update IRTE.
The "full" refresh is guaranteed to be called if activation changes in
this case as the only call to the "set" path is:
kvm_vcpu_update_apicv(vcpu);
static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu);
and kvm_vcpu_update_apicv() invokes the refresh if activation changes:
if (apic->apicv_active == activate)
goto out;
apic->apicv_active = activate;
kvm_apic_update_apicv(vcpu);
static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu);
Rename the helper to reflect that it is also called during "refresh".
WARNING: CPU: 183 PID: 49186 at arch/x86/kvm/svm/avic.c:1081 avic_vcpu_put+0xde/0xf0 [kvm_amd]
CPU: 183 PID: 49186 Comm: stable Tainted: G O 6.0.0-smp--fcddbca45f0a-sink #34
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022
RIP: 0010:avic_vcpu_put+0xde/0xf0 [kvm_amd]
avic_refresh_apicv_exec_ctrl+0x142/0x1c0 [kvm_amd]
avic_set_virtual_apic_mode+0x5a/0x70 [kvm_amd]
kvm_lapic_set_base+0x149/0x1a0 [kvm]
kvm_set_apic_base+0x8f/0xd0 [kvm]
kvm_set_msr_common+0xa3a/0xdc0 [kvm]
svm_set_msr+0x364/0x6b0 [kvm_amd]
__kvm_set_msr+0xb8/0x1c0 [kvm]
kvm_emulate_wrmsr+0x58/0x1d0 [kvm]
msr_interception+0x1c/0x30 [kvm_amd]
svm_invoke_exit_handler+0x31/0x100 [kvm_amd]
svm_handle_exit+0xfc/0x160 [kvm_amd]
vcpu_enter_guest+0x21bb/0x23e0 [kvm]
vcpu_run+0x92/0x450 [kvm]
kvm_arch_vcpu_ioctl_run+0x43e/0x6e0 [kvm]
kvm_vcpu_ioctl+0x559/0x620 [kvm]
Fixes: 05c4fe8c1bd9 ("KVM: SVM: Refresh AVIC configuration when changing APIC mode")
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/svm/avic.c | 31 +++++++++++++++----------------
arch/x86/kvm/svm/svm.c | 2 +-
arch/x86/kvm/svm/svm.h | 2 +-
3 files changed, 17 insertions(+), 18 deletions(-)
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 3b2c88b168ba..97ad0661f963 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -747,18 +747,6 @@ void avic_apicv_post_state_restore(struct kvm_vcpu *vcpu)
avic_handle_ldr_update(vcpu);
}
-void avic_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
-{
- if (!lapic_in_kernel(vcpu) || avic_mode == AVIC_MODE_NONE)
- return;
-
- if (kvm_get_apic_mode(vcpu) == LAPIC_MODE_INVALID) {
- WARN_ONCE(true, "Invalid local APIC state (vcpu_id=%d)", vcpu->vcpu_id);
- return;
- }
- avic_refresh_apicv_exec_ctrl(vcpu);
-}
-
static int avic_set_pi_irte_mode(struct kvm_vcpu *vcpu, bool activate)
{
int ret = 0;
@@ -1100,17 +1088,18 @@ void avic_vcpu_put(struct kvm_vcpu *vcpu)
WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
}
-
-void avic_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
+void avic_refresh_virtual_apic_mode(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
struct vmcb *vmcb = svm->vmcb01.ptr;
- bool activated = kvm_vcpu_apicv_active(vcpu);
+
+ if (!lapic_in_kernel(vcpu) || avic_mode == AVIC_MODE_NONE)
+ return;
if (!enable_apicv)
return;
- if (activated) {
+ if (kvm_vcpu_apicv_active(vcpu)) {
/**
* During AVIC temporary deactivation, guest could update
* APIC ID, DFR and LDR registers, which would not be trapped
@@ -1124,6 +1113,16 @@ void avic_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
avic_deactivate_vmcb(svm);
}
vmcb_mark_dirty(vmcb, VMCB_AVIC);
+}
+
+void avic_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
+{
+ bool activated = kvm_vcpu_apicv_active(vcpu);
+
+ if (!enable_apicv)
+ return;
+
+ avic_refresh_virtual_apic_mode(vcpu);
if (activated)
avic_vcpu_load(vcpu, vcpu->cpu);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 58f0077d9357..afae97ea9a06 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4798,7 +4798,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
.enable_nmi_window = svm_enable_nmi_window,
.enable_irq_window = svm_enable_irq_window,
.update_cr8_intercept = svm_update_cr8_intercept,
- .set_virtual_apic_mode = avic_set_virtual_apic_mode,
+ .set_virtual_apic_mode = avic_refresh_virtual_apic_mode,
.refresh_apicv_exec_ctrl = avic_refresh_apicv_exec_ctrl,
.check_apicv_inhibit_reasons = avic_check_apicv_inhibit_reasons,
.apicv_post_state_restore = avic_apicv_post_state_restore,
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 6a7686bf6900..7a95f50e80e7 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -646,7 +646,7 @@ void avic_vcpu_blocking(struct kvm_vcpu *vcpu);
void avic_vcpu_unblocking(struct kvm_vcpu *vcpu);
void avic_ring_doorbell(struct kvm_vcpu *vcpu);
unsigned long avic_vcpu_get_apicv_inhibit_reasons(struct kvm_vcpu *vcpu);
-void avic_set_virtual_apic_mode(struct kvm_vcpu *vcpu);
+void avic_refresh_virtual_apic_mode(struct kvm_vcpu *vcpu);
/* sev.c */
--
2.38.0.rc1.362.ged0d419d3c-goog
next prev parent reply other threads:[~2022-10-01 1:00 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-01 0:58 [PATCH v4 00/32] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-10-01 0:58 ` [PATCH v4 01/32] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2022-12-08 21:47 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 02/32] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-12-08 21:47 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 03/32] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
[not found] ` <b9f336f17eec6bfbb8429700e0f135d19813c576.camel@redhat.com>
2022-12-08 21:52 ` Maxim Levitsky
2022-12-09 0:40 ` Sean Christopherson
2022-12-08 22:02 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 04/32] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-10-01 0:58 ` [PATCH v4 05/32] KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Sean Christopherson
2022-12-08 21:53 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 06/32] KVM: x86: Track xAPIC ID only on userspace SET, _after_ vAPIC is updated Sean Christopherson
2022-12-08 21:53 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 07/32] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2022-12-08 21:53 ` Maxim Levitsky
2022-10-01 0:58 ` Sean Christopherson [this message]
2022-12-08 21:53 ` [PATCH v4 08/32] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 09/32] KVM: x86: Handle APICv updates for APIC "mode" changes via request Sean Christopherson
2022-12-08 21:54 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 10/32] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2022-12-08 21:55 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 11/32] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2022-12-08 21:56 ` Maxim Levitsky
2022-12-16 19:03 ` Sean Christopherson
2022-12-16 19:40 ` Sean Christopherson
2022-12-27 11:25 ` Paolo Bonzini
2023-01-03 16:30 ` Sean Christopherson
2022-10-01 0:58 ` [PATCH v4 12/32] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-10-01 0:58 ` [PATCH v4 13/32] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-10-01 0:58 ` [PATCH v4 14/32] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-10-01 0:58 ` [PATCH v4 15/32] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-12-08 21:56 ` Maxim Levitsky
2022-10-01 0:58 ` [PATCH v4 16/32] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 17/32] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 18/32] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2022-12-08 21:56 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 19/32] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Sean Christopherson
2022-12-08 21:57 ` Maxim Levitsky
2022-12-16 18:39 ` Sean Christopherson
2022-12-16 23:34 ` Sean Christopherson
2022-12-27 11:30 ` Paolo Bonzini
2022-10-01 0:59 ` [PATCH v4 20/32] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2022-12-08 21:57 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 21/32] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 22/32] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 23/32] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-12-08 21:58 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 24/32] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2022-12-08 21:58 ` Maxim Levitsky
2022-12-09 0:56 ` Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 25/32] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-12-08 21:58 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 26/32] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-12-08 21:58 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 27/32] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-12-08 21:59 ` Maxim Levitsky
2022-12-09 0:49 ` Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 28/32] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-12-08 22:00 ` Maxim Levitsky
2022-12-29 8:27 ` mlevitsk
2023-01-04 10:08 ` Maxim Levitsky
2023-01-04 18:02 ` Sean Christopherson
2023-01-04 18:34 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 29/32] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-12-08 22:00 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 30/32] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-10-01 0:59 ` [PATCH v4 31/32] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
2022-12-08 22:01 ` Maxim Levitsky
2022-10-01 0:59 ` [PATCH v4 32/32] KVM: x86: Track required APICv inhibits with variable, not callback Sean Christopherson
2022-12-08 22:03 ` Maxim Levitsky
2022-12-27 11:22 ` [PATCH v4 00/32] KVM: x86: AVIC and local APIC fixes+cleanups Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221001005915.2041642-9-seanjc@google.com \
--to=seanjc@google.com \
--cc=alejandro.j.jimenez@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lirongqing@baidu.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=suravee.suthikulpanit@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®