From: Martin Kaiser <martin@kaiser.cx>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
Phillip Potter <phil@philpotter.co.uk>,
Michael Straube <straube.linux@gmail.com>,
Pavel Skripkin <paskripkin@gmail.com>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Martin Kaiser <martin@kaiser.cx>
Subject: [PATCH] staging: r8188eu: remove bLedLinkBlinkInProgress
Date: Sat, 1 Oct 2022 19:06:18 +0200 [thread overview]
Message-ID: <20221001170618.444444-1-martin@kaiser.cx> (raw)
Remove the bLedLinkBlinkInProgress component from struct led_priv. Its
only use is to block requests for "link blinking" when this blinking
pattern is already active.
The "link blinking" pattern is a continuous blinking pattern (as opposed
to other patterns where we blink N times), it's no problem to restart this
pattern when it's already running.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
drivers/staging/r8188eu/core/rtw_led.c | 14 --------------
drivers/staging/r8188eu/include/rtw_led.h | 1 -
2 files changed, 15 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_led.c b/drivers/staging/r8188eu/core/rtw_led.c
index 1e316e6358ea..2527c252c3e9 100644
--- a/drivers/staging/r8188eu/core/rtw_led.c
+++ b/drivers/staging/r8188eu/core/rtw_led.c
@@ -26,7 +26,6 @@ static void ResetLedStatus(struct led_priv *pLed)
pLed->BlinkTimes = 0; /* Number of times to toggle led state for blinking. */
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedScanBlinkInProgress = false;
}
@@ -99,7 +98,6 @@ static void blink_work(struct work_struct *work)
pLed->BlinkTimes--;
if (pLed->BlinkTimes == 0) {
if (check_fwstate(pmlmepriv, _FW_LINKED)) {
- pLed->bLedLinkBlinkInProgress = true;
pLed->CurrLedState = LED_BLINK_NORMAL;
schedule_delayed_work(&pLed->blink_work, LED_BLINK_LINK_INTVL);
} else {
@@ -115,7 +113,6 @@ static void blink_work(struct work_struct *work)
pLed->BlinkTimes--;
if (pLed->BlinkTimes == 0) {
if (check_fwstate(pmlmepriv, _FW_LINKED)) {
- pLed->bLedLinkBlinkInProgress = true;
pLed->CurrLedState = LED_BLINK_NORMAL;
schedule_delayed_work(&pLed->blink_work, LED_BLINK_LINK_INTVL);
} else {
@@ -132,7 +129,6 @@ static void blink_work(struct work_struct *work)
break;
case LED_BLINK_WPS_STOP: /* WPS success */
if (!pLed->bLedOn) {
- pLed->bLedLinkBlinkInProgress = true;
pLed->CurrLedState = LED_BLINK_NORMAL;
schedule_delayed_work(&pLed->blink_work, LED_BLINK_LINK_INTVL);
@@ -189,23 +185,18 @@ void rtw_led_control(struct adapter *padapter, enum LED_CTL_MODE LedAction)
cancel_delayed_work(&pLed->blink_work);
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedBlinkInProgress = false;
pLed->CurrLedState = LED_BLINK_SLOWLY;
schedule_delayed_work(&pLed->blink_work, LED_BLINK_NO_LINK_INTVL);
break;
case LED_CTL_LINK:
- if (!pLed->bLedLinkBlinkInProgress)
- return;
-
if (pLed->CurrLedState == LED_BLINK_SCAN || IS_LED_WPS_BLINKING(pLed))
return;
cancel_delayed_work(&pLed->blink_work);
pLed->bLedBlinkInProgress = false;
- pLed->bLedLinkBlinkInProgress = true;
pLed->CurrLedState = LED_BLINK_NORMAL;
schedule_delayed_work(&pLed->blink_work, LED_BLINK_LINK_INTVL);
@@ -222,7 +213,6 @@ void rtw_led_control(struct adapter *padapter, enum LED_CTL_MODE LedAction)
cancel_delayed_work(&pLed->blink_work);
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedBlinkInProgress = false;
pLed->bLedScanBlinkInProgress = true;
@@ -240,7 +230,6 @@ void rtw_led_control(struct adapter *padapter, enum LED_CTL_MODE LedAction)
cancel_delayed_work(&pLed->blink_work);
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedBlinkInProgress = true;
pLed->CurrLedState = LED_BLINK_TXRX;
@@ -253,7 +242,6 @@ void rtw_led_control(struct adapter *padapter, enum LED_CTL_MODE LedAction)
cancel_delayed_work(&pLed->blink_work);
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedBlinkInProgress = false;
pLed->bLedScanBlinkInProgress = false;
pLed->bLedWPSBlinkInProgress = true;
@@ -263,7 +251,6 @@ void rtw_led_control(struct adapter *padapter, enum LED_CTL_MODE LedAction)
case LED_CTL_STOP_WPS:
cancel_delayed_work(&pLed->blink_work);
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedBlinkInProgress = false;
pLed->bLedScanBlinkInProgress = false;
pLed->bLedWPSBlinkInProgress = true;
@@ -283,7 +270,6 @@ void rtw_led_control(struct adapter *padapter, enum LED_CTL_MODE LedAction)
break;
case LED_CTL_POWER_OFF:
pLed->CurrLedState = RTW_LED_OFF;
- pLed->bLedLinkBlinkInProgress = false;
pLed->bLedBlinkInProgress = false;
pLed->bLedWPSBlinkInProgress = false;
pLed->bLedScanBlinkInProgress = false;
diff --git a/drivers/staging/r8188eu/include/rtw_led.h b/drivers/staging/r8188eu/include/rtw_led.h
index 8520f022a67f..f57dcf6c8b24 100644
--- a/drivers/staging/r8188eu/include/rtw_led.h
+++ b/drivers/staging/r8188eu/include/rtw_led.h
@@ -47,7 +47,6 @@ struct led_priv {
u32 BlinkTimes; /* Number of times to toggle led state for blinking. */
- bool bLedLinkBlinkInProgress;
bool bLedScanBlinkInProgress;
struct delayed_work blink_work;
};
--
2.30.2
next reply other threads:[~2022-10-01 17:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-01 17:06 Martin Kaiser [this message]
2022-10-02 8:58 ` Philipp Hortmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221001170618.444444-1-martin@kaiser.cx \
--to=martin@kaiser.cx \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=paskripkin@gmail.com \
--cc=phil@philpotter.co.uk \
--cc=straube.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®