From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Xiaoke Wang <xkernel.wang@foxmail.com>,
Philipp Hortmann <philipp.g.hortmann@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>,
Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
remckee0@gmail.com, martin@kaiser.cx, straube.linux@gmail.com,
makvihas@gmail.com, linux-staging@lists.linux.dev
Subject: [PATCH AUTOSEL 6.0 49/67] staging: r8188eu: fix a potential memory leak in rtw_init_cmd_priv()
Date: Wed, 12 Oct 2022 20:15:30 -0400 [thread overview]
Message-ID: <20221013001554.1892206-49-sashal@kernel.org> (raw)
In-Reply-To: <20221013001554.1892206-1-sashal@kernel.org>
From: Xiaoke Wang <xkernel.wang@foxmail.com>
[ Upstream commit 06bfdb6d889f57fe9ce7bd139ce278b68f3a59de ]
In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will not be properly
released. Besides, considering there are only two error paths and the
first one can directly return, we do not need to implicitly jump to the
`exit` tag to execute the error handling code.
So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no
runtime testing was performed.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_1B6AAE10471D4556788892F8FF3E4812F306@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/r8188eu/core/rtw_cmd.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_cmd.c b/drivers/staging/r8188eu/core/rtw_cmd.c
index 5b6a891b5d67..5eb1751a43ac 100644
--- a/drivers/staging/r8188eu/core/rtw_cmd.c
+++ b/drivers/staging/r8188eu/core/rtw_cmd.c
@@ -58,8 +58,6 @@ static int _rtw_enqueue_cmd(struct __queue *queue, struct cmd_obj *obj)
u32 rtw_init_cmd_priv(struct cmd_priv *pcmdpriv)
{
- u32 res = _SUCCESS;
-
init_completion(&pcmdpriv->enqueue_cmd);
/* sema_init(&(pcmdpriv->cmd_done_sema), 0); */
init_completion(&pcmdpriv->start_cmd_thread);
@@ -74,27 +72,24 @@ u32 rtw_init_cmd_priv(struct cmd_priv *pcmdpriv)
pcmdpriv->cmd_allocated_buf = kzalloc(MAX_CMDSZ + CMDBUFF_ALIGN_SZ,
GFP_KERNEL);
- if (!pcmdpriv->cmd_allocated_buf) {
- res = _FAIL;
- goto exit;
- }
+ if (!pcmdpriv->cmd_allocated_buf)
+ return _FAIL;
pcmdpriv->cmd_buf = pcmdpriv->cmd_allocated_buf + CMDBUFF_ALIGN_SZ - ((size_t)(pcmdpriv->cmd_allocated_buf) & (CMDBUFF_ALIGN_SZ - 1));
pcmdpriv->rsp_allocated_buf = kzalloc(MAX_RSPSZ + 4, GFP_KERNEL);
if (!pcmdpriv->rsp_allocated_buf) {
- res = _FAIL;
- goto exit;
+ kfree(pcmdpriv->cmd_allocated_buf);
+ return _FAIL;
}
pcmdpriv->rsp_buf = pcmdpriv->rsp_allocated_buf + 4 - ((size_t)(pcmdpriv->rsp_allocated_buf) & 3);
pcmdpriv->cmd_done_cnt = 0;
pcmdpriv->rsp_cnt = 0;
-exit:
- return res;
+ return _SUCCESS;
}
u32 rtw_init_evt_priv(struct evt_priv *pevtpriv)
--
2.35.1
next prev parent reply other threads:[~2022-10-13 0:22 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-13 0:14 [PATCH AUTOSEL 6.0 01/67] staging: r8188eu: do not spam the kernel log Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 02/67] clk: zynqmp: Fix stack-out-of-bounds in strncpy` Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 03/67] media: cx88: Fix a null-ptr-deref bug in buffer_prepare() Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 04/67] media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 05/67] clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 06/67] RDMA/rxe: Delete error messages triggered by incoming Read requests Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 07/67] usb: host: xhci-plat: suspend and resume clocks Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 08/67] usb: host: xhci-plat: suspend/resume clks for brcm Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 09/67] scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 10/67] dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 11/67] scsi: 3w-9xxx: Avoid disabling device if failing to enable it Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 12/67] nbd: Fix hung when signal interrupts nbd_start_device_ioctl() Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 13/67] iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 14/67] usb: gadget: uvc: increase worker prio to WQ_HIGHPRI Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 15/67] staging: rtl8712: Fix return type for implementation of ndo_start_xmit Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 16/67] staging: rtl8192e: " Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 17/67] power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type() Sasha Levin
2022-10-13 0:14 ` [PATCH AUTOSEL 6.0 18/67] staging: vt6655: fix potential memory leak Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 19/67] blk-throttle: prevent overflow while calculating wait time Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 20/67] clk: microchip: mpfs: add MSS pll's set & round rate Sasha Levin
2022-10-13 5:29 ` Conor Dooley
2022-10-13 17:55 ` Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 21/67] gpiolib: of: do not ignore requested index when applying quirks Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 22/67] gpiolib: of: make Freescale SPI quirk similar to all others Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 23/67] gpiolib: rework quirk handling in of_find_gpio() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 24/67] ata: libahci_platform: Sanity check the DT child nodes number Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 25/67] habanalabs: ignore EEPROM errors during boot Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 26/67] nvmet-auth: clean up with done_kfree Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 27/67] bcache: fix set_at_max_writeback_rate() for multiple attached devices Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 28/67] soundwire: cadence: Don't overwrite msg->buf during write commands Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 29/67] soundwire: intel: fix error handling on dai registration issues Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 30/67] hid: topre: Add driver fixing report descriptor Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 31/67] habanalabs: remove some f/w descriptor validations Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 32/67] HID: roccat: Fix use-after-free in roccat_read() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 33/67] HSI: ssi_protocol: fix potential resource leak in ssip_pn_open() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 34/67] HID: nintendo: check analog user calibration for plausibility Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 35/67] eventfd: guard wake_up in eventfd fs calls as well Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 36/67] md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 37/67] usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 38/67] usb: musb: Fix musb_gadget.c rxstate overflow bug Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 39/67] usb: dwc3: core: add gfladj_refclk_lpm_sel quirk Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 40/67] arm64: dts: imx8mp: Add snps,gfladj-refclk-lpm-sel quirk to USB nodes Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 41/67] usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 42/67] Revert "usb: storage: Add quirk for Samsung Fit flash" Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 43/67] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 44/67] io_uring: fix CQE reordering Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 45/67] staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 46/67] staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv() Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 47/67] staging: rtl8192u: Fix return type of ieee80211_xmit Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 48/67] staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow Sasha Levin
2022-10-13 0:15 ` Sasha Levin [this message]
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 50/67] scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 51/67] ext2: Use kvmalloc() for group descriptor array Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 52/67] nvme: handle effects after freeing the request Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 53/67] nvme: copy firmware_rev on each init Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 54/67] nvmet-tcp: add bounds check on Transfer Tag Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 55/67] usb: idmouse: fix an uninit-value in idmouse_open Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 56/67] block: replace blk_queue_nowait with bdev_nowait Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 57/67] blk-mq: use quiesced elevator switch when reinitializing queues Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 58/67] nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 59/67] nvmet: don't look at the request_queue in nvmet_bdev_set_limits Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 60/67] hwmon (occ): Retry for checksum failure Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 61/67] fsi: occ: Prevent use after free Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 62/67] fsi: master-ast-cf: Fix missing of_node_put in fsi_master_acf_probe Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 63/67] dmaengine: dw-edma: Remove runtime PM support Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 64/67] sbitmap: fix lockup while swapping Sasha Levin
2022-10-13 1:08 ` Hugh Dickins
2022-10-13 17:54 ` Sasha Levin
2022-10-13 18:40 ` Hugh Dickins
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 65/67] usb: typec: ucsi: Don't warn on probe deferral Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 66/67] clk: bcm2835: Make peripheral PLLC critical Sasha Levin
2022-10-13 0:15 ` [PATCH AUTOSEL 6.0 67/67] clk: bcm2835: Round UART input clock up Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221013001554.1892206-49-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=makvihas@gmail.com \
--cc=martin@kaiser.cx \
--cc=phil@philpotter.co.uk \
--cc=philipp.g.hortmann@gmail.com \
--cc=remckee0@gmail.com \
--cc=stable@vger.kernel.org \
--cc=straube.linux@gmail.com \
--cc=xkernel.wang@foxmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome