From: Melody Olvera <quic_molvera@quicinc.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Melody Olvera <quic_molvera@quicinc.com>
Subject: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
Date: Fri, 14 Oct 2022 15:11:38 -0700 [thread overview]
Message-ID: <20221014221138.7552-4-quic_molvera@quicinc.com> (raw)
In-Reply-To: <20221014221138.7552-1-quic_molvera@quicinc.com>
Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++
3 files changed, 462 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7669a7cee9f..8417295adfeb 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
new file mode 100644
index 000000000000..47a8eaf4fda2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qdu1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QDU1000 IDP";
+ compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ppvar_sys: ppvar-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&ppvar_sys>;
+ };
+};
+
+&apps_rsc {
+ pm8150-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vph_pwr>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+ vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+ vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+ vreg_s2a_0p5: smps2 {
+ regulator-name = "vreg_s2a_0p5";
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <570000>;
+ };
+
+ vreg_s3a_1p05: smps3 {
+ regulator-name = "vreg_s3a_1p05";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_s4a_1p8: smps4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_s5a_2p0: smps5 {
+ regulator-name = "vreg_s5a_2p0";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-name = "vreg_s6a_0p9";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_s7a_1p2: smps7 {
+ regulator-name = "vreg_s7a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_s8a_1p3: smps8 {
+ regulator-name = "vreg_s8a_1p3";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l1a_0p91: ldo1 {
+ regulator-name = "vreg_l1a_0p91";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l2a_2p3: ldo2 {
+ regulator-name = "vreg_l2a_2p3";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l3a_1p2: ldo3 {
+ regulator-name = "vreg_l3a_1p2";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-name = "vreg_l5a_0p8";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l6a_0p91: ldo6 {
+ regulator-name = "vreg_l6a_0p91";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+ };
+
+ vreg_l8a_0p91: ldo8 {
+ regulator-name = "vreg_l8a_0p91";
+ regulator-min-microvolt = <888000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l9a_0p91: ldo9 {
+ regulator-name = "vreg_l8a_0p91";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10a_2p95: ldo10 {
+ regulator-name = "vreg_l10a_2p95";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l11a_0p91: ldo11 {
+ regulator-name = "vreg_l11a_0p91";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-name = "vreg_l15a_1p8";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l16a_1p8: ldo16 {
+ regulator-name = "vreg_l16a_1p8";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l17a_3p3: ldo17 {
+ regulator-name = "vreg_l17a_3p3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l18a_1p2: ldo18 {
+ regulator-name = "vreg_l18a_1p2";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&uart7 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
new file mode 100644
index 000000000000..54770c697db8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qru1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QRU1000 IDP";
+ compatible = "qcom,qru1000-idp", "qcom,qru1000";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ppvar_sys: ppvar-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&ppvar_sys>;
+ };
+};
+
+&apps_rsc {
+ pm8150-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vph_pwr>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+ vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+ vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+ vreg_s2a_0p5: smps2 {
+ regulator-name = "vreg_s2a_0p5";
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <570000>;
+ };
+
+ vreg_s3a_1p05: smps3 {
+ regulator-name = "vreg_s3a_1p05";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_s4a_1p8: smps4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_s5a_2p0: smps5 {
+ regulator-name = "vreg_s5a_2p0";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-name = "vreg_s6a_0p9";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_s7a_1p2: smps7 {
+ regulator-name = "vreg_s7a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_s8a_1p3: smps8 {
+ regulator-name = "vreg_s8a_1p3";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l1a_0p91: ldo1 {
+ regulator-name = "vreg_l1a_0p91";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l2a_2p3: ldo2 {
+ regulator-name = "vreg_l2a_2p3";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l3a_1p2: ldo3 {
+ regulator-name = "vreg_l3a_1p2";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-name = "vreg_l5a_0p8";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l6a_0p91: ldo6 {
+ regulator-name = "vreg_l6a_0p91";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+ };
+
+ vreg_l8a_0p91: ldo8 {
+ regulator-name = "vreg_l8a_0p91";
+ regulator-min-microvolt = <888000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l9a_0p91: ldo9 {
+ regulator-name = "vreg_l8a_0p91";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10a_2p95: ldo10 {
+ regulator-name = "vreg_l10a_2p95";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l11a_0p91: ldo11 {
+ regulator-name = "vreg_l11a_0p91";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-name = "vreg_l15a_1p8";
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l16a_1p8: ldo16 {
+ regulator-name = "vreg_l16a_1p8";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l17a_3p3: ldo17 {
+ regulator-name = "vreg_l17a_3p3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l18a_1p2: ldo18 {
+ regulator-name = "vreg_l18a_1p2";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&uart7 {
+ status = "okay";
+};
--
2.38.0
next prev parent reply other threads:[~2022-10-14 22:13 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-14 22:11 [PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000 Melody Olvera
2022-10-14 22:11 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document QDU1000/QRU1000 SoCs and boards Melody Olvera
2022-10-15 13:19 ` Krzysztof Kozlowski
2022-10-16 22:58 ` Rob Herring
2022-10-14 22:11 ` [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs Melody Olvera
2022-10-15 13:28 ` Krzysztof Kozlowski
2022-10-19 20:21 ` Melody Olvera
2022-10-20 12:41 ` Krzysztof Kozlowski
2022-10-20 13:54 ` Stephan Gerhold
2022-10-20 16:08 ` Krzysztof Kozlowski
2022-10-20 16:26 ` Krzysztof Kozlowski
2022-10-20 17:18 ` Stephan Gerhold
2022-10-20 17:59 ` Krzysztof Kozlowski
2022-10-20 18:55 ` Melody Olvera
2022-10-15 15:11 ` Krzysztof Kozlowski
2022-10-18 22:15 ` Krzysztof Kozlowski
2022-10-19 18:56 ` Melody Olvera
2022-10-24 0:53 ` Richard Acayan
2022-10-24 17:10 ` Melody Olvera
2022-10-24 22:28 ` Richard Acayan
2022-10-24 22:31 ` Melody Olvera
2022-10-24 22:51 ` Richard Acayan
2022-10-24 22:56 ` Melody Olvera
2022-10-14 22:11 ` Melody Olvera [this message]
2022-10-15 13:29 ` [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs Krzysztof Kozlowski
2022-10-19 21:16 ` Melody Olvera
2022-10-20 12:39 ` Krzysztof Kozlowski
2022-10-18 22:10 ` kernel test robot
2022-10-15 0:04 ` [PATCH v2 0/3] Add base device tree files for QDU1000/QRU1000 Melody Olvera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221014221138.7552-4-quic_molvera@quicinc.com \
--to=quic_molvera@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®