Re: [PATCH] Accessiblity: speakup_audptr: specifying the default driver parameters among the module params

[Samuel Thibault <samuel.thibault@ens-lyon.org>]

Osama Muhammad, le ven. 21 oct. 2022 18:53:09 +0500, a ecrit:
> This is an enhancement which allows to specify the default driver
> parameters among the module parameters.
> 
> Adding default variables to the speakup_audptr module
> allows to easily set that at boot, rather than
> setting the sys variables after boot.
> More details can be found here:
> https://github.com/linux-speakup/speakup/issues/7
> 
> Signed-off-by: Osama Muhammad <osmtendev@gmail.com>

Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

Thanks!

> ---
>  .../accessibility/speakup/speakup_audptr.c    | 42 +++++++++++++++----
>  1 file changed, 33 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/accessibility/speakup/speakup_audptr.c b/drivers/accessibility/speakup/speakup_audptr.c
> index 4d16d60db9b2..55813f3e40ff 100644
> --- a/drivers/accessibility/speakup/speakup_audptr.c
> +++ b/drivers/accessibility/speakup/speakup_audptr.c
> @@ -19,15 +19,24 @@
>  static int synth_probe(struct spk_synth *synth);
>  static void synth_flush(struct spk_synth *synth);
>  
> -static struct var_t vars[] = {
> -	{ CAPS_START, .u.s = {"\x05[f99]" } },
> -	{ CAPS_STOP, .u.s = {"\x05[f80]" } },
> -	{ RATE, .u.n = {"\x05[r%d]", 10, 0, 20, 100, -10, NULL } },
> -	{ PITCH, .u.n = {"\x05[f%d]", 80, 39, 4500, 0, 0, NULL } },
> -	{ VOL, .u.n = {"\x05[g%d]", 21, 0, 40, 0, 0, NULL } },
> -	{ TONE, .u.n = {"\x05[s%d]", 9, 0, 63, 0, 0, NULL } },
> -	{ PUNCT, .u.n = {"\x05[A%c]", 0, 0, 3, 0, 0, "nmsa" } },
> -	{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> +
> +enum default_vars_id {
> +	CAPS_START_ID = 0, CAPS_STOP_ID,
> +	RATE_ID, PITCH_ID,
> +	VOL_ID, TONE_ID, PUNCT_ID,
> +	DIRECT_ID, V_LAST_VAR_ID,
> +	NB_ID
> +};
> +
> +static struct var_t vars[NB_ID] = {
> +	[CAPS_START_ID] = { CAPS_START, .u.s = {"\x05[f99]" } },
> +	[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\x05[f80]" } },
> +	[RATE_ID] = { RATE, .u.n = {"\x05[r%d]", 10, 0, 20, 100, -10, NULL } },
> +	[PITCH_ID] = { PITCH, .u.n = {"\x05[f%d]", 80, 39, 4500, 0, 0, NULL } },
> +	[VOL_ID] = { VOL, .u.n = {"\x05[g%d]", 21, 0, 40, 0, 0, NULL } },
> +	[TONE_ID] = { TONE, .u.n = {"\x05[s%d]", 9, 0, 63, 0, 0, NULL } },
> +	[PUNCT_ID] = { PUNCT, .u.n = {"\x05[A%c]", 0, 0, 3, 0, 0, "nmsa" } },
> +	[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
>  	V_LAST_VAR
>  };
>  
> @@ -158,10 +167,25 @@ static int synth_probe(struct spk_synth *synth)
>  module_param_named(ser, synth_audptr.ser, int, 0444);
>  module_param_named(dev, synth_audptr.dev_name, charp, 0444);
>  module_param_named(start, synth_audptr.startup, short, 0444);
> +module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
> +module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
> +module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
> +module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
> +module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
> +module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
> +
> +
>  
>  MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
>  MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
>  MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
> +MODULE_PARM_DESC(rate, "Set the rate variable on load.");
> +MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
> +MODULE_PARM_DESC(vol, "Set the vol variable on load.");
> +MODULE_PARM_DESC(tone, "Set the tone variable on load.");
> +MODULE_PARM_DESC(punct, "Set the punct variable on load.");
> +MODULE_PARM_DESC(direct, "Set the direct variable on load.");
> +
>  
>  module_spk_synth(synth_audptr);
>  
> -- 
> 2.25.1
> 

-- 
Samuel
---
Pour une évaluation indépendante, transparente et rigoureuse !
Je soutiens la Commission d'Évaluation de l'Inria.