From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V2 00/15] arm64: dts: imx8m-evk: misc dts update
Date: Mon, 24 Oct 2022 11:13:36 +0800 [thread overview]
Message-ID: <20221024031351.4135651-1-peng.fan@oss.nxp.com> (raw)
From: Peng Fan <peng.fan@nxp.com>
V2:
Address Marco's comments
Update commit log for patch [3,5,9,14]/15
Order iomuxc in patch 4/15
Update flexspi node name in patch 6/15
Increase i2c speed in patch 7/15
V1:
https://lore.kernel.org/all/20221020095934.1659449-1-peng.fan@oss.nxp.com/
This patchset includes several dts update for i.MX8M/N/P-EVK, with
only one dtsi patch to add mlmix power domain for i.MX8MP.
i.MX8MP-EVK: Enable PWM, uart1/3, I2C2
correct pcie pad
Fix pmic buck/ldo voltage
off-on-delay-us for SD
i.MX8MN-EVK: Enable UART1, SDHC1, I2C recovery IOMUXC
Update vdd_soc dvs voltage
i.MX8MM-EVK: add vcc supply for pca6416
use off-on-delay-us for SD
A few patches are directly cherry-picked from NXP downstream which
already includes R-b tag
Adrian Alonso (1):
arm64: dts: imx8mm-evk: add vcc supply for pca6416
Clark Wang (1):
ARM64: dts: imx8mp-evk: add pwm support
Haibo Chen (1):
arm64: dts: imx8m[m,p]-evk: change to use off-on-delay-us in regulator
Han Xu (1):
arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evk
Peng Fan (10):
arm64: dts: imx8mp: add mlmix power domain
arm64: dts: imx8mp-evk: correct pcie pad settings
arm64: dts: imx8mp-evk: fix BUCK/LDO voltage
arm64: dts: imx8mp-evk: enable uart1/3 ports
arm64: dts: imx8mp-evk: enable I2C2 node
arm64: dts: imx8mn-evk: update vdd_soc dvs voltage
arm64: dts: imx8mn-evk: set off-on-delay-us in regulator
arm64: dts: imx8mn-evk: add i2c gpio recovery settings
arm64: dts: imx8mn-evk: enable uart1
arm64: dts: imx8mn-evk: enable usdhc1
Sherry Sun (1):
arm64: dts: imx8mm-evk: Enable usdhc1 to support wifi
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 23 +++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 41 +++++
arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 4 +-
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 112 +++++++++++-
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 161 ++++++++++++++++--
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 8 +
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 +
7 files changed, 329 insertions(+), 21 deletions(-)
--
2.37.1
next reply other threads:[~2022-10-24 3:12 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-24 3:13 Peng Fan (OSS) [this message]
2022-10-24 3:13 ` [PATCH V2 01/15] arm64: dts: imx8mp: add mlmix power domain Peng Fan (OSS)
2022-10-28 14:58 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 02/15] arm64: dts: imx8mp-evk: correct pcie pad settings Peng Fan (OSS)
2022-10-28 14:59 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 03/15] arm64: dts: imx8mp-evk: fix BUCK/LDO voltage Peng Fan (OSS)
2022-10-28 14:53 ` Marco Felsch
2022-11-03 10:22 ` Peng Fan
2022-10-24 3:13 ` [PATCH V2 04/15] ARM64: dts: imx8mp-evk: add pwm support Peng Fan (OSS)
2022-10-28 14:59 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 05/15] arm64: dts: imx8mp-evk: enable uart1/3 ports Peng Fan (OSS)
2022-10-28 15:00 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 06/15] arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evk Peng Fan (OSS)
2022-10-28 15:00 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 07/15] arm64: dts: imx8mp-evk: enable I2C2 node Peng Fan (OSS)
2022-10-28 15:01 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 08/15] arm64: dts: imx8mn-evk: update vdd_soc dvs voltage Peng Fan (OSS)
2022-10-24 3:13 ` [PATCH V2 09/15] arm64: dts: imx8mn-evk: set off-on-delay-us in regulator Peng Fan (OSS)
2022-10-28 15:02 ` Marco Felsch
2022-11-03 10:25 ` Peng Fan
2022-10-24 3:13 ` [PATCH V2 10/15] arm64: dts: imx8mn-evk: add i2c gpio recovery settings Peng Fan (OSS)
2022-10-28 14:44 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 11/15] arm64: dts: imx8mn-evk: enable uart1 Peng Fan (OSS)
2022-10-28 15:03 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 12/15] arm64: dts: imx8mn-evk: enable usdhc1 Peng Fan (OSS)
2022-10-28 15:05 ` Marco Felsch
2022-10-24 3:13 ` [PATCH V2 13/15] arm64: dts: imx8mm-evk: Enable usdhc1 to support wifi Peng Fan (OSS)
2022-10-28 14:42 ` Marco Felsch
2022-11-03 10:27 ` Peng Fan
2022-10-24 3:13 ` [PATCH V2 14/15] arm64: dts: imx8m[m,p]-evk: change to use off-on-delay-us in regulator Peng Fan (OSS)
2022-10-28 14:41 ` [PATCH V2 14/15] arm64: dts: imx8m[m, p]-evk: " Marco Felsch
2022-10-24 3:13 ` [PATCH V2 15/15] arm64: dts: imx8mm-evk: add vcc supply for pca6416 Peng Fan (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221024031351.4135651-1-peng.fan@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®