From: Takashi Iwai <tiwai@suse.de>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 6.0.y] Revert "ALSA: hda: Fix page fault in snd_hda_codec_shutdown()"
Date: Mon, 24 Oct 2022 16:39:31 +0200 [thread overview]
Message-ID: <20221024143931.15722-1-tiwai@suse.de> (raw)
This reverts commit 7494e2e6c55ed192f2b91c821fd6832744ba8741.
Which was upstream commit f2bd1c5ae2cb0cf9525c9bffc0038c12dd7e1338.
The patch caused a regression leading to the missing HD-audio device
with ASoC SOF driver. It was a part of large series and backporting
it alone breaks things while backporting the whole is too intrusive
as stable changes. And, the issue the patch tries to address is a
corner case, hence it's better to revert.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216613
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
It's only for 6.0.y; 6.1-rc is fine
sound/pci/hda/hda_codec.c | 41 ++++++++++++++++++++-------------------
1 file changed, 21 insertions(+), 20 deletions(-)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 4ae8b9574778..384426d7e9dd 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -931,28 +931,8 @@ snd_hda_codec_device_init(struct hda_bus *bus, unsigned int codec_addr,
}
codec->bus = bus;
- codec->depop_delay = -1;
- codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
- codec->core.dev.release = snd_hda_codec_dev_release;
- codec->core.exec_verb = codec_exec_verb;
codec->core.type = HDA_DEV_LEGACY;
- mutex_init(&codec->spdif_mutex);
- mutex_init(&codec->control_mutex);
- snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
- snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
- snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
- snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
- snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
- snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
- snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
- snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
- INIT_LIST_HEAD(&codec->conn_list);
- INIT_LIST_HEAD(&codec->pcm_list_head);
- INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
- refcount_set(&codec->pcm_ref, 1);
- init_waitqueue_head(&codec->remove_sleep);
-
return codec;
}
EXPORT_SYMBOL_GPL(snd_hda_codec_device_init);
@@ -1005,8 +985,29 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card,
if (snd_BUG_ON(codec_addr > HDA_MAX_CODEC_ADDRESS))
return -EINVAL;
+ codec->core.dev.release = snd_hda_codec_dev_release;
+ codec->core.exec_verb = codec_exec_verb;
+
codec->card = card;
codec->addr = codec_addr;
+ mutex_init(&codec->spdif_mutex);
+ mutex_init(&codec->control_mutex);
+ snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
+ snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
+ snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
+ snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
+ snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
+ snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
+ snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
+ snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
+ INIT_LIST_HEAD(&codec->conn_list);
+ INIT_LIST_HEAD(&codec->pcm_list_head);
+ refcount_set(&codec->pcm_ref, 1);
+ init_waitqueue_head(&codec->remove_sleep);
+
+ INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
+ codec->depop_delay = -1;
+ codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
#ifdef CONFIG_PM
codec->power_jiffies = jiffies;
--
2.35.3
next reply other threads:[~2022-10-24 21:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-24 14:39 Takashi Iwai [this message]
2022-10-24 14:50 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221024143931.15722-1-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®