[PATCH net-next 1/1] stmmac: intel: Separate ADL-N and RPL-P device ID from TGL

[Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>]

Separating the ADL-N and RPL-P device IDs from TGL to handle the
differences from TGL.

Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 0a2afc1a3124..2eb8e31be1a2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -830,6 +830,21 @@ static int adls_sgmii_phy1_data(struct pci_dev *pdev,
 static struct stmmac_pci_info adls_sgmii1g_phy1_info = {
 	.setup = adls_sgmii_phy1_data,
 };
+
+static int adln_sgmii_phy0_data(struct pci_dev *pdev,
+				struct plat_stmmacenet_data *plat)
+{
+	plat->bus_id = 1;
+	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+	plat->serdes_powerup = intel_serdes_powerup;
+	plat->serdes_powerdown = intel_serdes_powerdown;
+	return tgl_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info adln_sgmii1g_phy0_info = {
+	.setup = adln_sgmii_phy0_data,
+};
+
 static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
 	{
 		.func = 6,
@@ -1212,8 +1227,8 @@ static const struct pci_device_id intel_eth_pci_id_table[] = {
 	{ PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_1, &tgl_sgmii1g_phy1_info) },
 	{ PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_0, &adls_sgmii1g_phy0_info) },
 	{ PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_1, &adls_sgmii1g_phy1_info) },
-	{ PCI_DEVICE_DATA(INTEL, ADLN_SGMII1G, &tgl_sgmii1g_phy0_info) },
-	{ PCI_DEVICE_DATA(INTEL, RPLP_SGMII1G, &tgl_sgmii1g_phy0_info) },
+	{ PCI_DEVICE_DATA(INTEL, ADLN_SGMII1G, &adln_sgmii1g_phy0_info) },
+	{ PCI_DEVICE_DATA(INTEL, RPLP_SGMII1G, &adln_sgmii1g_phy0_info) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table);
-- 
2.34.1