From: Chester Lin <clin@suse.com>
To: Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: "Chester Lin" <clin@suse.com>,
s32@nxp.com, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Larisa Grigore" <larisa.grigore@nxp.com>,
"Ghennadi Procopciuc" <Ghennadi.Procopciuc@nxp.com>,
"Andreas Färber" <afaerber@suse.de>,
"Matthias Brugger" <mbrugger@suse.com>
Subject: [PATCH 1/2] dt-bindings: pinctrl: add schema for NXP S32 SoCs
Date: Mon, 31 Oct 2022 18:08:42 +0800 [thread overview]
Message-ID: <20221031100843.14579-2-clin@suse.com> (raw)
In-Reply-To: <20221031100843.14579-1-clin@suse.com>
Add DT schema for the pinctrl driver of NXP S32 SoC family.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Chester Lin <clin@suse.com>
---
.../pinctrl/nxp,s32cc-siul2-pinctrl.yaml | 91 +++++++++++++++++++
1 file changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,s32cc-siul2-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32cc-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32cc-siul2-pinctrl.yaml
new file mode 100644
index 000000000000..eafb9091cbf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32cc-siul2-pinctrl.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,s32cc-siul2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32 Common Chassis SIUL2 iomux controller
+
+maintainers:
+ - Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
+ - Chester Lin <clin@suse.com>
+
+description: |
+ Core driver for the pin controller found on S32 Common Chassis SoC.
+
+properties:
+ compatible:
+ enum:
+ - nxp,s32g-siul2-pinctrl
+
+ reg:
+ minItems: 5
+ maxItems: 6
+ description: A list of register regions to be reserved.
+
+ nxp,pins:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ A list of [start, end] pin ID boundaries that correspond to each of
+ the register regions reserved.
+
+required:
+ - compatible
+ - reg
+ - nxp,pins
+
+patternProperties:
+ '_pins$':
+ type: object
+ patternProperties:
+ '_grp[0-9]$':
+ type: object
+ allOf:
+ - $ref: pinmux-node.yaml#
+ - $ref: pincfg-node.yaml#
+ description:
+ Pinctrl node's client devices specify pin muxes using subnodes,
+ which in turn use the standard properties below.
+
+additionalProperties: false
+
+examples:
+ - |
+
+ pinctrl: siul2-pinctrl@4009c240 {
+ compatible = "nxp,s32g-siul2-pinctrl";
+
+ /* MSCR range */
+ reg = <0x4009c240 0x198>,
+ <0x44010400 0x2c>,
+ <0x44010480 0xbc>,
+ /* MSCR range */
+ <0x4009ca40 0x150>,
+ <0x44010c1c 0x45c>,
+ <0x440110f8 0x108>;
+
+ /* MSCR range */
+ nxp,pins = <0 101>,
+ <112 122>,
+ <144 190>,
+ /* IMCR range */
+ <512 595>,
+ <631 909>,
+ <942 1007>;
+
+ llce_can0_pins {
+ llce_can0_grp0 {
+ pinmux = <0x2b0>;
+ input-enable;
+ slew-rate = <0x00>;
+ };
+
+ llce_can0_grp1 {
+ pinmux = <0x2c2>;
+ output-enable;
+ slew-rate = <0x00>;
+ };
+ };
+ };
+...
--
2.37.3
next prev parent reply other threads:[~2022-10-31 10:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-31 10:08 [PATCH 0/2] Add pinctrl support for S32 SoC family Chester Lin
2022-10-31 10:08 ` Chester Lin [this message]
2022-11-02 15:49 ` [PATCH 1/2] dt-bindings: pinctrl: add schema for NXP S32 SoCs Rob Herring
2022-11-09 15:04 ` Chester Lin
2022-11-08 12:31 ` Linus Walleij
2022-11-09 16:45 ` Chester Lin
2022-11-10 10:00 ` Linus Walleij
2022-11-10 11:18 ` Andrei Stefanescu
2022-10-31 10:08 ` [PATCH 2/2] pinctrl: add NXP S32 SoC family support Chester Lin
2022-11-08 12:35 ` Linus Walleij
2022-11-08 14:54 ` Andrei Stefanescu
2022-11-08 16:51 ` Andreas Färber
2022-11-09 9:06 ` Andrei Stefanescu
2022-11-09 9:18 ` Chester Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221031100843.14579-2-clin@suse.com \
--to=clin@suse.com \
--cc=Ghennadi.Procopciuc@nxp.com \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=larisa.grigore@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbrugger@suse.com \
--cc=robh+dt@kernel.org \
--cc=s32@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome