mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shawn Guo <shawn.guo@linaro.org>
To: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Kevin Hilman <khilman@kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Len Brown <len.brown@intel.com>, Pavel Machek <pavel@ucw.cz>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH v3 4/4] PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook
Date: Wed,  2 Nov 2022 22:21:04 +0800	[thread overview]
Message-ID: <20221102142104.2006554-5-shawn.guo@linaro.org> (raw)
In-Reply-To: <20221102142104.2006554-1-shawn.guo@linaro.org>

On platforms which use SHUTDOWN as hibernation mode, the genpd noirq
hooks will be called like below.

    genpd_freeze_noirq()         genpd_restore_noirq()
          ↓                            ↑
    Create snapshot image        Restore target kernel
          ↓                            ↑
    genpd_thaw_noirq()           genpd_freeze_noirq()
          ↓                            ↑
    Write snapshot image         Read snapshot image
          ↓                            ↑
    power_down()                 Kernel boot

As of today suspend hooks genpd_suspend[resume]_noirq() manages domain
on/off state, but hibernate hooks genpd_freeze[thaw]_noirq() doesn't.
This results in a different behavior of domain power state between suspend
and hibernate freeze, i.e. domain is powered off for the former while on
for the later.  It causes a problem on platforms like i.MX where the
domain needs to be powered on/off by calling clock and regulator interface.
When the platform restores from hibernation, the domain is off in hardware
and genpd_restore_noirq() tries to power it on, but will never succeed
because software state of domain (clock and regulator) is left on from the
last hibernate freeze, so kernel thinks that clock and regulator are
enabled while they are actually not turned on in hardware.  The
consequence would be that devices in the power domain will access
registers without clock or power, and cause hardware lockup.

Power off[on] domain in hibernate .freeze[thaw]_noirq hook for reasons:

- Align the behavior between suspend and hibernate freeze.
- Have power state of domains stay in sync between hardware and software
  for hibernate freeze, and thus fix the lockup issue seen on i.MX
  platform.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/base/power/domain.c | 35 ++++-------------------------------
 1 file changed, 4 insertions(+), 31 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 7cee9439fd21..2f0787d5101b 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1307,24 +1307,11 @@ static int genpd_resume_noirq(struct device *dev)
  */
 static int genpd_freeze_noirq(struct device *dev)
 {
-	const struct generic_pm_domain *genpd;
-	int ret = 0;
-
 	dev_dbg(dev, "%s()\n", __func__);
 
-	genpd = dev_to_genpd(dev);
-	if (IS_ERR(genpd))
-		return -EINVAL;
-
-	ret = pm_generic_freeze_noirq(dev);
-	if (ret)
-		return ret;
-
-	if (genpd->dev_ops.stop && genpd->dev_ops.start &&
-	    !pm_runtime_status_suspended(dev))
-		ret = genpd_stop_dev(genpd, dev);
-
-	return ret;
+	return genpd_finish_suspend(dev,
+				    pm_generic_freeze_noirq,
+				    pm_generic_thaw_noirq);
 }
 
 /**
@@ -1336,23 +1323,9 @@ static int genpd_freeze_noirq(struct device *dev)
  */
 static int genpd_thaw_noirq(struct device *dev)
 {
-	const struct generic_pm_domain *genpd;
-	int ret = 0;
-
 	dev_dbg(dev, "%s()\n", __func__);
 
-	genpd = dev_to_genpd(dev);
-	if (IS_ERR(genpd))
-		return -EINVAL;
-
-	if (genpd->dev_ops.stop && genpd->dev_ops.start &&
-	    !pm_runtime_status_suspended(dev)) {
-		ret = genpd_start_dev(genpd, dev);
-		if (ret)
-			return ret;
-	}
-
-	return pm_generic_thaw_noirq(dev);
+	return genpd_finish_resume(dev, pm_generic_thaw_noirq);
 }
 
 /**
-- 
2.25.1


      parent reply	other threads:[~2022-11-02 14:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-02 14:21 [PATCH v3 0/4] Manage domain power state for hibernate Shawn Guo
2022-11-02 14:21 ` [PATCH v3 1/4] PM: domains: Drop genpd status manipulation for hibernate restore Shawn Guo
2022-11-04 15:32   ` Ulf Hansson
2022-11-02 14:21 ` [PATCH v3 2/4] PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend() Shawn Guo
2022-11-02 14:21 ` [PATCH v3 3/4] PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq() Shawn Guo
2022-11-02 14:21 ` Shawn Guo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221102142104.2006554-5-shawn.guo@linaro.org \
    --to=shawn.guo@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@kernel.org \
    --cc=len.brown@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rafael@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®