mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lu Wei <luwei32@huawei.com>
To: <edumazet@google.com>, <davem@davemloft.net>,
	<yoshfuji@linux-ipv6.org>, <dsahern@kernel.org>,
	<kuba@kernel.org>, <pabeni@redhat.com>, <xemul@parallels.com>,
	<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [patch net v5] tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
Date: Fri, 4 Nov 2022 10:27:23 +0800	[thread overview]
Message-ID: <20221104022723.1066429-1-luwei32@huawei.com> (raw)

If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
of TCPOPT_SACK_PERM is called to enable sack after data is sent
and dupacks are received , it will trigger a warning in function
tcp_verify_left_out() as follows:

============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
tcp_timeout_mark_lost+0x154/0x160
tcp_enter_loss+0x2b/0x290
tcp_retransmit_timer+0x50b/0x640
tcp_write_timer_handler+0x1c8/0x340
tcp_write_timer+0xe5/0x140
call_timer_fn+0x3a/0x1b0
__run_timers.part.0+0x1bf/0x2d0
run_timer_softirq+0x43/0xb0
__do_softirq+0xfd/0x373
__irq_exit_rcu+0xf6/0x140

The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED
   directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup
   ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out
   increases
9. sack_outs + lost_out > packets_out triggers since lost_out and
   sack_outs increase repeatly

In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
Step7 not happen and the warning will not be triggered. As suggested by
Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
already sent.

socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp*  --keep-going \
       --ignore-taint

socket-tcp* represent all socket-tcp tests in test/zdtm/static/.

Fixes: b139ba4e90dc ("tcp: Repair connection-time negotiated parameters")
Signed-off-by: Lu Wei <luwei32@huawei.com>
---
v5: modify the commit message
 net/ipv4/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ef14efa1fb70..54836a6b81d6 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3647,7 +3647,7 @@ int do_tcp_setsockopt(struct sock *sk, int level, int optname,
 	case TCP_REPAIR_OPTIONS:
 		if (!tp->repair)
 			err = -EINVAL;
-		else if (sk->sk_state == TCP_ESTABLISHED)
+		else if (sk->sk_state == TCP_ESTABLISHED && !tp->bytes_sent)
 			err = tcp_repair_options_est(sk, optval, optlen);
 		else
 			err = -EPERM;
-- 
2.31.1


             reply	other threads:[~2022-11-04  1:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-04  2:27 Lu Wei [this message]
2022-11-04  1:24 ` Eric Dumazet
2022-11-07 11:40 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221104022723.1066429-1-luwei32@huawei.com \
    --to=luwei32@huawei.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=xemul@parallels.com \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®