From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
To: linux-can@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
linux-kernel@vger.kernel.org,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Subject: [PATCH] can: etas_es58x: report the firmware version through ethtool
Date: Fri, 4 Nov 2022 16:36:59 +0900 [thread overview]
Message-ID: <20221104073659.414147-1-mailhol.vincent@wanadoo.fr> (raw)
ES58x devices report below information in their usb product info
string:
* the firmware version
* the bootloader version
* the hardware revision
Report the firmware version through ethtool_drvinfo::fw_version.
Because struct ethtool_drvinfo has no fields to report the boatloader
version nor the hardware revision, continue to print these in the
kernel log (c.f. es58x_print_product_info()).
While doing so, bump up copyright year of each modified files.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
---
drivers/net/can/usb/etas_es58x/es581_4.c | 5 +-
drivers/net/can/usb/etas_es58x/es58x_core.c | 140 +++++++++++++-------
drivers/net/can/usb/etas_es58x/es58x_core.h | 11 +-
drivers/net/can/usb/etas_es58x/es58x_fd.c | 5 +-
4 files changed, 108 insertions(+), 53 deletions(-)
diff --git a/drivers/net/can/usb/etas_es58x/es581_4.c b/drivers/net/can/usb/etas_es58x/es581_4.c
index 1bcdcece5ec7..1d6ae7b279cf 100644
--- a/drivers/net/can/usb/etas_es58x/es581_4.c
+++ b/drivers/net/can/usb/etas_es58x/es581_4.c
@@ -6,7 +6,7 @@
*
* Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
* Copyright (c) 2020 ETAS K.K.. All rights reserved.
- * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
*/
#include <linux/kernel.h>
@@ -492,7 +492,8 @@ const struct es58x_parameters es581_4_param = {
.tx_bulk_max = ES581_4_TX_BULK_MAX,
.urb_cmd_header_len = ES581_4_URB_CMD_HEADER_LEN,
.rx_urb_max = ES58X_RX_URBS_MAX,
- .tx_urb_max = ES58X_TX_URBS_MAX
+ .tx_urb_max = ES58X_TX_URBS_MAX,
+ .prod_info_delim = ','
};
const struct es58x_operators es581_4_ops = {
diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.c b/drivers/net/can/usb/etas_es58x/es58x_core.c
index 51294b717040..7c20a73169f3 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_core.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_core.c
@@ -7,7 +7,7 @@
*
* Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
* Copyright (c) 2020 ETAS K.K.. All rights reserved.
- * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
*/
#include <linux/ethtool.h>
@@ -1978,10 +1978,6 @@ static const struct net_device_ops es58x_netdev_ops = {
.ndo_eth_ioctl = can_eth_ioctl_hwts,
};
-static const struct ethtool_ops es58x_ethtool_ops = {
- .get_ts_info = can_ethtool_op_get_ts_info_hwts,
-};
-
/**
* es58x_set_mode() - Change network device mode.
* @netdev: CAN network device.
@@ -2062,6 +2058,96 @@ static void es58x_init_priv(struct es58x_device *es58x_dev,
can->do_set_mode = es58x_set_mode;
}
+/**
+ * es58x_get_product_info() - Get the product information.
+ * @es58x_dev: ES58X device.
+ * @prod_info: Buffer where to store the product information.
+ * @prod_info_len: Length of @prod_info.
+ *
+ * Do a synchronous call to get the product information.
+ *
+ * Return: zero on success, errno when any error occurs.
+ */
+static int es58x_get_product_info(struct es58x_device *es58x_dev,
+ char *prod_info, size_t prod_info_len)
+{
+ struct usb_device *udev = es58x_dev->udev;
+ const int es58x_prod_info_idx = 6;
+ int ret;
+
+ ret = usb_string(udev, es58x_prod_info_idx, prod_info, prod_info_len);
+ if (ret < 0) {
+ dev_err(es58x_dev->dev,
+ "%s: Could not read the product info: %pe\n",
+ __func__, ERR_PTR(ret));
+ return ret;
+ }
+ if (ret >= prod_info_len - 1) {
+ dev_warn(es58x_dev->dev,
+ "%s: Buffer is too small, result might be truncated\n",
+ __func__);
+ }
+
+ return 0;
+}
+
+/**
+ * es58x_print_product_info() - Print the product information.
+ * @es58x_dev: ES58X device.
+ *
+ * Return: zero on success, errno when any error occurs.
+ */
+static int es58x_print_product_info(struct es58x_device *es58x_dev)
+{
+ char prod_info[ES58X_USB_STRING_SIZE];
+ int ret;
+
+ ret = es58x_get_product_info(es58x_dev, prod_info, sizeof(prod_info));
+ if (ret == 0)
+ dev_info(es58x_dev->dev, "Product info: %s\n", prod_info);
+
+ return ret;
+}
+
+/**
+ * es58x_get_drvinfo() - Get the driver name and firmware version.
+ * @netdev: CAN network device.
+ * @drvinfo: Driver information.
+ *
+ * Populate @drvinfo with the driver name and the firwmware version.
+ */
+static void es58x_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct es58x_device *es58x_dev = es58x_priv(netdev)->es58x_dev;
+ char prod_info[ES58X_USB_STRING_SIZE];
+ char *start, *end;
+
+ strscpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver));
+
+ if (es58x_get_product_info(es58x_dev, prod_info, sizeof(prod_info)) < 0)
+ return;
+
+ /* The firmware prefix is either "FW_V" or "FW:" */
+ start = strstr(prod_info, "FW");
+ if (!start)
+ return;
+ /* Go to first digit */
+ while (!isdigit(*start))
+ start++;
+
+ end = strchr(start, es58x_dev->param->prod_info_delim);
+ if (!end || end - start >= sizeof(drvinfo->fw_version))
+ return;
+
+ strscpy(drvinfo->fw_version, start, end - start + 1);
+}
+
+static const struct ethtool_ops es58x_ethtool_ops = {
+ .get_drvinfo = es58x_get_drvinfo,
+ .get_ts_info = can_ethtool_op_get_ts_info_hwts,
+};
+
/**
* es58x_init_netdev() - Initialize the network device.
* @es58x_dev: ES58X device.
@@ -2119,48 +2205,6 @@ static void es58x_free_netdevs(struct es58x_device *es58x_dev)
}
}
-/**
- * es58x_get_product_info() - Get the product information and print them.
- * @es58x_dev: ES58X device.
- *
- * Do a synchronous call to get the product information.
- *
- * Return: zero on success, errno when any error occurs.
- */
-static int es58x_get_product_info(struct es58x_device *es58x_dev)
-{
- struct usb_device *udev = es58x_dev->udev;
- const int es58x_prod_info_idx = 6;
- /* Empirical tests show a prod_info length of maximum 83,
- * below should be more than enough.
- */
- const size_t prod_info_len = 127;
- char *prod_info;
- int ret;
-
- prod_info = kmalloc(prod_info_len, GFP_KERNEL);
- if (!prod_info)
- return -ENOMEM;
-
- ret = usb_string(udev, es58x_prod_info_idx, prod_info, prod_info_len);
- if (ret < 0) {
- dev_err(es58x_dev->dev,
- "%s: Could not read the product info: %pe\n",
- __func__, ERR_PTR(ret));
- goto out_free;
- }
- if (ret >= prod_info_len - 1) {
- dev_warn(es58x_dev->dev,
- "%s: Buffer is too small, result might be truncated\n",
- __func__);
- }
- dev_info(es58x_dev->dev, "Product info: %s\n", prod_info);
-
- out_free:
- kfree(prod_info);
- return ret < 0 ? ret : 0;
-}
-
/**
* es58x_init_es58x_dev() - Initialize the ES58X device.
* @intf: USB interface.
@@ -2243,7 +2287,7 @@ static int es58x_probe(struct usb_interface *intf,
if (IS_ERR(es58x_dev))
return PTR_ERR(es58x_dev);
- ret = es58x_get_product_info(es58x_dev);
+ ret = es58x_print_product_info(es58x_dev);
if (ret)
return ret;
diff --git a/drivers/net/can/usb/etas_es58x/es58x_core.h b/drivers/net/can/usb/etas_es58x/es58x_core.h
index 640fe0a1df63..3a9f6582c06d 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_core.h
+++ b/drivers/net/can/usb/etas_es58x/es58x_core.h
@@ -6,7 +6,7 @@
*
* Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
* Copyright (c) 2020 ETAS K.K.. All rights reserved.
- * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
*/
#ifndef __ES58X_COMMON_H__
@@ -49,6 +49,12 @@
/* A magic number sent by the ES581.4 to inform it is alive. */
#define ES58X_HEARTBEAT 0x11
+/* USB strings are at most 127 characters and es58x devices only use
+ * ASCII (i.e. one byte). Also, the maximum observed length is 83
+ * bytes.
+ */
+#define ES58X_USB_STRING_SIZE (127 + 1)
+
/**
* enum es58x_driver_info - Quirks of the device.
* @ES58X_DUAL_CHANNEL: Device has two CAN channels. If this flag is
@@ -306,6 +312,8 @@ struct es58x_priv {
* @urb_cmd_header_len: Length of the URB command header.
* @rx_urb_max: Number of RX URB to be allocated during device probe.
* @tx_urb_max: Number of TX URB to be allocated during device probe.
+ * @prod_info_delim: delimiter of the different fields in the USB
+ * product information string.
*/
struct es58x_parameters {
const struct can_bittiming_const *bittiming_const;
@@ -324,6 +332,7 @@ struct es58x_parameters {
u8 urb_cmd_header_len;
u8 rx_urb_max;
u8 tx_urb_max;
+ char prod_info_delim;
};
/**
diff --git a/drivers/net/can/usb/etas_es58x/es58x_fd.c b/drivers/net/can/usb/etas_es58x/es58x_fd.c
index c97ffa71fd75..3d781b89df4a 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_fd.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_fd.c
@@ -8,7 +8,7 @@
*
* Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved.
* Copyright (c) 2020 ETAS K.K.. All rights reserved.
- * Copyright (c) 2020, 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
+ * Copyright (c) 2020-2022 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
*/
#include <linux/kernel.h>
@@ -550,7 +550,8 @@ const struct es58x_parameters es58x_fd_param = {
.tx_bulk_max = ES58X_FD_TX_BULK_MAX,
.urb_cmd_header_len = ES58X_FD_URB_CMD_HEADER_LEN,
.rx_urb_max = ES58X_RX_URBS_MAX,
- .tx_urb_max = ES58X_TX_URBS_MAX
+ .tx_urb_max = ES58X_TX_URBS_MAX,
+ .prod_info_delim = '-'
};
const struct es58x_operators es58x_fd_ops = {
--
2.37.4
next reply other threads:[~2022-11-04 7:37 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-04 7:36 Vincent Mailhol [this message]
2022-11-04 11:52 ` Marc Kleine-Budde
2022-11-04 15:35 ` Vincent MAILHOL
2022-11-04 17:16 ` [PATCH v2 0/3] can: etas_es58x: report firmware version Vincent Mailhol
2022-11-04 17:16 ` [PATCH v2 1/3] USB: core: export usb_cache_string() Vincent Mailhol
2022-11-05 8:22 ` Greg Kroah-Hartman
2022-11-04 17:16 ` [PATCH v2 2/3] can: etas_es58x: use usb_cache_string() to retrieve the product info string Vincent Mailhol
2022-11-05 8:21 ` Greg Kroah-Hartman
2022-11-04 17:16 ` [PATCH v2 3/3] can: etas_es58x: report the firmware version through ethtool Vincent Mailhol
2022-11-05 8:23 ` Greg Kroah-Hartman
2022-11-05 9:27 ` Vincent MAILHOL
2022-11-05 17:21 ` Vincent MAILHOL
2022-11-05 17:38 ` Greg Kroah-Hartman
2022-11-06 0:45 ` Alan Stern
2022-11-06 5:34 ` Vincent MAILHOL
2022-11-06 11:21 ` Greg Kroah-Hartman
2022-11-06 12:47 ` Vincent MAILHOL
2022-11-06 14:22 ` Greg Kroah-Hartman
2022-11-06 14:44 ` Vincent MAILHOL
2022-11-06 16:02 ` Greg Kroah-Hartman
2022-11-12 15:40 ` Vincent MAILHOL
2022-11-06 15:18 ` Alan Stern
2022-11-13 4:01 ` [PATCH v3 0/3] can: etas_es58x: report firmware, bootloader and hardware version Vincent Mailhol
2022-11-13 4:01 ` [PATCH v3 1/3] USB: core: export usb_cache_string() Vincent Mailhol
2022-11-22 16:00 ` Greg Kroah-Hartman
2022-11-13 4:01 ` [PATCH v3 2/3] can: etas_es58x: export firmware, bootloader and hardware versions in sysfs Vincent Mailhol
2022-11-15 22:47 ` Saeed Mahameed
2022-11-16 0:36 ` Vincent MAILHOL
2022-11-16 23:20 ` Saeed Mahameed
2022-11-13 4:01 ` [PATCH v3 3/3] can: etas_es58x: report firmware-version through ethtool Vincent Mailhol
2022-11-13 16:48 ` [PATCH v3 0/3] can: etas_es58x: report firmware, bootloader and hardware version Andrew Lunn
2022-11-14 16:49 ` Vincent MAILHOL
2022-11-14 17:08 ` Andrew Lunn
2022-11-26 16:22 ` [PATCH v4 0/6] " Vincent Mailhol
2022-11-26 16:22 ` [PATCH v4 1/6] USB: core: export usb_cache_string() Vincent Mailhol
2022-11-26 16:22 ` [PATCH v4 2/6] can: etas_es58x: add devlink support Vincent Mailhol
2022-11-26 16:51 ` Andrew Lunn
2022-11-27 5:10 ` Vincent MAILHOL
2022-11-27 15:36 ` Alan Stern
2022-11-28 1:34 ` Vincent MAILHOL
2022-11-28 5:32 ` Vincent MAILHOL
2022-11-28 15:50 ` Alan Stern
2022-11-28 23:30 ` Vincent MAILHOL
2022-11-28 13:42 ` Andrew Lunn
2022-11-28 14:29 ` Vincent MAILHOL
2022-11-26 16:22 ` [PATCH v4 3/6] can: etas_es58x: export product information through devlink_ops::info_get() Vincent Mailhol
2022-11-26 17:16 ` Andrew Lunn
2022-11-27 3:42 ` Vincent MAILHOL
2022-11-27 4:31 ` Vincent MAILHOL
2022-11-27 15:07 ` Andrew Lunn
2022-11-28 1:21 ` Vincent MAILHOL
2022-11-28 13:43 ` Andrew Lunn
2022-11-28 13:47 ` Andrew Lunn
2022-11-28 14:43 ` Vincent MAILHOL
2022-11-28 22:27 ` Jakub Kicinski
2022-11-28 23:17 ` Vincent MAILHOL
2022-11-26 16:22 ` [PATCH v4 4/6] can: etas_es58x: remove es58x_get_product_info() Vincent Mailhol
2022-11-28 13:44 ` Andrew Lunn
2022-11-28 14:36 ` Vincent MAILHOL
2022-11-26 16:22 ` [PATCH v4 5/6] can: etas_es58x: report the firmware version through ethtool Vincent Mailhol
2022-11-28 13:44 ` Andrew Lunn
2022-11-28 22:29 ` Jakub Kicinski
2022-11-29 17:12 ` Vincent MAILHOL
2022-11-30 2:31 ` Jakub Kicinski
2022-11-26 16:22 ` [PATCH v4 6/6] Documentation: devlink: add devlink documentation for the etas_es58x driver Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 0/7] can: etas_es58x: report firmware, bootloader and hardware version Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 1/7] can: etas_es58x: add devlink support Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 2/7] can: etas_es58x: add devlink port support Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 3/7] USB: core: export usb_cache_string() Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 4/7] net: devlink: add DEVLINK_INFO_VERSION_GENERIC_FW_BOOTLOADER Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 5/7] can: etas_es58x: export product information through devlink_ops::info_get() Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 6/7] can: etas_es58x: remove es58x_get_product_info() Vincent Mailhol
2022-11-30 17:46 ` [PATCH v5 7/7] Documentation: devlink: add devlink documentation for the etas_es58x driver Vincent Mailhol
2022-12-02 12:27 ` Marc Kleine-Budde
2022-12-02 13:15 ` Vincent MAILHOL
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221104073659.414147-1-mailhol.vincent@wanadoo.fr \
--to=mailhol.vincent@wanadoo.fr \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®