[PATCH V1 1/1] mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout

[Chevron Li <chevron.li@bayhubtech.com>]

The SD card is recognized failed sometimes when resume from suspend.
Because CD# debounce time too long then card present report wrong.
Finally, card is recognized failed.

Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
---
Change in V1:
Adjust bayhub chip setting for CD# debounce time to minimum value
---
 drivers/mmc/host/sdhci-pci-o2micro.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index ad457cd9cbaa..bca1d095b759 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -32,6 +32,7 @@
 #define O2_SD_CAPS		0xE0
 #define O2_SD_ADMA1		0xE2
 #define O2_SD_ADMA2		0xE7
+#define O2_SD_MISC_CTRL2	0xF0
 #define O2_SD_INF_MOD		0xF1
 #define O2_SD_MISC_CTRL4	0xFC
 #define O2_SD_MISC_CTRL		0x1C0
@@ -877,6 +878,12 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 		/* Set Tuning Windows to 5 */
 		pci_write_config_byte(chip->pdev,
 				O2_SD_TUNING_CTRL, 0x55);
+		//Adjust 1st and 2nd CD debounce time
+		pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
+		scratch_32 &= 0xFFE7FFFF;
+		scratch_32 |= 0x00180000;
+		pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
+		pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 					   O2_SD_LOCK_WP, &scratch);

base-commit: ee6050c8af96bba2f81e8b0793a1fc2f998fcd20
-- 
2.25.1