From: Stephen Boyd <swboyd@chromium.org>
To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>
Cc: linux-kernel@vger.kernel.org, patches@lists.linux.dev,
linux-arm-msm@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
Matthias Kaehlcke <mka@chromium.org>,
Alexandru M Stan <amstan@chromium.org>
Subject: [PATCH v2 1/2] arm64: dts: qcom: Fully describe fingerprint node on Herobrine
Date: Mon, 7 Nov 2022 11:15:34 -0800 [thread overview]
Message-ID: <20221107191535.624371-2-swboyd@chromium.org> (raw)
In-Reply-To: <20221107191535.624371-1-swboyd@chromium.org>
Update the fingerprint node on Herobrine to match the fingerprint DT
binding. This will allow us to drive the reset and boot gpios from the
driver when it is re-attached after flashing. We'll also be able to boot
the fingerprint processor if the BIOS isn't doing it for us.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index ca02ef26f161..448da9794722 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -503,13 +503,16 @@ ap_spi_fp: &spi9 {
cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
cros_ec_fp: ec@0 {
- compatible = "google,cros-ec-spi";
+ compatible = "google,cros-ec-fp", "google,cros-ec-spi";
reg = <0>;
interrupt-parent = <&tlmm>;
interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+ boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
spi-max-frequency = <3000000>;
+ vdd-supply = <&pp3300_fp_mcu>;
};
};
--
https://chromeos.dev
next prev parent reply other threads:[~2022-11-07 19:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-07 19:15 [PATCH v2 0/2] Update fingerprint node on herobrine/trogdor Stephen Boyd
2022-11-07 19:15 ` Stephen Boyd [this message]
2022-11-08 1:22 ` [PATCH v2 1/2] arm64: dts: qcom: Fully describe fingerprint node on Herobrine Doug Anderson
2022-11-07 19:15 ` [PATCH v2 2/2] arm64: dts: qcom: Fully describe fingerprint node on Trogdor Stephen Boyd
2022-11-08 1:22 ` Doug Anderson
2022-11-09 0:56 ` Stephen Boyd
2022-11-08 4:36 ` (subset) [PATCH v2 0/2] Update fingerprint node on herobrine/trogdor Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221107191535.624371-2-swboyd@chromium.org \
--to=swboyd@chromium.org \
--cc=agross@kernel.org \
--cc=amstan@chromium.org \
--cc=andersson@kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=patches@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®