From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski@linaro.org>,
<krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
<vladimir.oltean@nxp.com>, <vigneshr@ti.com>, <nsekhar@ti.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>
Subject: [PATCH net-next v5 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration
Date: Wed, 9 Nov 2022 09:52:03 +0530 [thread overview]
Message-ID: <20221109042203.375042-4-s-vadapalli@ti.com> (raw)
In-Reply-To: <20221109042203.375042-1-s-vadapalli@ti.com>
Use PHY framework APIs to initialize the SERDES PHY connected to CPSW MAC.
Define the functions am65_cpsw_disable_phy(), am65_cpsw_enable_phy(),
am65_cpsw_disable_serdes_phy() and am65_cpsw_enable_serdes_phy().
Power on and initialize the SerDes PHY in am65_cpsw_nuss_init_slave_ports()
by invoking am65_cpsw_enable_serdes_phy().
Power off the SerDes PHY in am65_cpsw_nuss_remove() by invoking
am65_cpsw_disable_serdes_phy().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 65 ++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index bc9f29d10c22..83349d24a0e6 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1444,6 +1444,65 @@ static const struct net_device_ops am65_cpsw_nuss_netdev_ops = {
.ndo_setup_tc = am65_cpsw_qos_ndo_setup_tc,
};
+static void am65_cpsw_disable_phy(struct phy *phy)
+{
+ phy_power_off(phy);
+ phy_exit(phy);
+}
+
+static int am65_cpsw_enable_phy(struct phy *phy)
+{
+ int ret;
+
+ ret = phy_init(phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_power_on(phy);
+ if (ret < 0) {
+ phy_exit(phy);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void am65_cpsw_disable_serdes_phy(struct am65_cpsw_common *common)
+{
+ struct device_node *node, *port_np;
+ struct device *dev = common->dev;
+ const char *name = "serdes-phy";
+ struct phy *phy;
+
+ node = of_get_child_by_name(dev->of_node, "ethernet-ports");
+
+ for_each_child_of_node(node, port_np) {
+ phy = devm_of_phy_get(dev, port_np, name);
+ am65_cpsw_disable_phy(phy);
+ }
+}
+
+static int am65_cpsw_init_serdes_phy(struct device *dev, struct device_node *port_np)
+{
+ const char *name = "serdes-phy";
+ struct phy *phy;
+ int ret;
+
+ phy = devm_of_phy_get(dev, port_np, name);
+ if (PTR_ERR(phy) == -ENODEV)
+ return 0;
+
+ ret = am65_cpsw_enable_phy(phy);
+ if (ret < 0)
+ goto err_phy;
+
+ return 0;
+
+err_phy:
+ devm_phy_put(dev, phy);
+ return ret;
+}
+
static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state)
{
@@ -1941,6 +2000,11 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
goto of_node_put;
}
+ /* Initialize the phy for the port */
+ ret = am65_cpsw_init_serdes_phy(dev, port_np);
+ if (ret)
+ return ret;
+
port->slave.mac_only =
of_property_read_bool(port_np, "ti,mac-only");
@@ -2868,6 +2932,7 @@ static int am65_cpsw_nuss_remove(struct platform_device *pdev)
am65_cpsw_nuss_phylink_cleanup(common);
am65_cpsw_unregister_devlink(common);
+ am65_cpsw_disable_serdes_phy(common);
am65_cpsw_unregister_notifiers(common);
/* must unregister ndevs here because DD release_driver routine calls
--
2.25.1
next prev parent reply other threads:[~2022-11-09 4:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-09 4:22 [PATCH net-next v5 0/3] Add support for QSGMII mode for J721e CPSW9G to am65-cpsw driver Siddharth Vadapalli
2022-11-09 4:22 ` [PATCH net-next v5 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Add J721e CPSW9G support Siddharth Vadapalli
2022-11-09 4:22 ` [PATCH net-next v5 2/3] net: ethernet: ti: am65-cpsw: Enable QSGMII mode for J721e CPSW9G Siddharth Vadapalli
2022-11-09 4:22 ` Siddharth Vadapalli [this message]
2022-11-10 13:06 ` [PATCH net-next v5 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration Paolo Abeni
2022-11-17 10:16 ` Siddharth Vadapalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221109042203.375042-4-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=srk@ti.com \
--cc=vigneshr@ti.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®