From: Brian Masney <bmasney@redhat.com>
To: andersson@kernel.org
Cc: agross@kernel.org, konrad.dybcio@linaro.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, jejb@linux.ibm.com,
martin.petersen@oracle.com, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-scsi@vger.kernel.org
Subject: [PATCH 1/2] scsi: ufs: ufs-qcom: add basic interconnect support
Date: Thu, 17 Nov 2022 05:49:56 -0500 [thread overview]
Message-ID: <20221117104957.254648-2-bmasney@redhat.com> (raw)
In-Reply-To: <20221117104957.254648-1-bmasney@redhat.com>
The firmware on the Qualcomm platforms expects the interconnect votes to
be present. Let's add very basic support where the maximum throughput is
requested to match what's done in a few other drivers.
This will not break boot on systems where the interconnects and
interconnect-names properties are not specified in device tree for UFS
since the interconnect framework will silently return.
Signed-off-by: Brian Masney <bmasney@redhat.com>
---
drivers/ufs/host/ufs-qcom.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 8ad1415e10b6..55bf8dd88985 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -7,6 +7,7 @@
#include <linux/time.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/interconnect.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -936,6 +937,22 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
.deassert = ufs_qcom_reset_deassert,
};
+static int ufs_qcom_icc_init(struct device *dev, char *pathname)
+{
+ struct icc_path *path;
+ int ret;
+
+ path = devm_of_icc_get(dev, pathname);
+ if (IS_ERR(path))
+ return dev_err_probe(dev, PTR_ERR(path), "failed to acquire interconnect path\n");
+
+ ret = icc_set_bw(path, 0, UINT_MAX);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to set bandwidth request\n");
+
+ return 0;
+}
+
/**
* ufs_qcom_init - bind phy with controller
* @hba: host controller instance
@@ -991,6 +1008,14 @@ static int ufs_qcom_init(struct ufs_hba *hba)
err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n");
goto out_variant_clear;
}
+
+ err = ufs_qcom_icc_init(dev, "ufs-ddr");
+ if (err)
+ goto out_variant_clear;
+
+ err = ufs_qcom_icc_init(dev, "cpu-ufs");
+ if (err)
+ goto out_variant_clear;
}
host->device_reset = devm_gpiod_get_optional(dev, "reset",
--
2.38.1
next prev parent reply other threads:[~2022-11-17 10:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-17 10:49 [PATCH 0/2] qcom: add basic interconnect support to UFS Brian Masney
2022-11-17 10:49 ` Brian Masney [this message]
2022-11-17 11:33 ` [PATCH 1/2] scsi: ufs: ufs-qcom: add basic interconnect support Manivannan Sadhasivam
2022-12-22 22:17 ` Dmitry Baryshkov
2023-05-19 17:20 ` Konrad Dybcio
2022-11-17 10:49 ` [PATCH 2/2] arm64: dts: qcom: sc8280xp: add interconnect properties to ufs nodes Brian Masney
2022-11-17 11:12 ` [PATCH 0/2] qcom: add basic interconnect support to UFS Krzysztof Kozlowski
2023-01-19 14:40 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221117104957.254648-2-bmasney@redhat.com \
--to=bmasney@redhat.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jejb@linux.ibm.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®