From: Tim Harvey <tharvey@gateworks.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH 3/3] arm64: dts: imx8m*-venice: add dp83867 PHY LED mode configuration
Date: Thu, 17 Nov 2022 16:15:48 -0800 [thread overview]
Message-ID: <20221118001548.635752-4-tharvey@gateworks.com> (raw)
In-Reply-To: <20221118001548.635752-1-tharvey@gateworks.com>
Add configuration for dp83867 PHY LED mode via ti,led-modes property.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 6 ++++++
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 6 ++++++
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 6 ++++++
3 files changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index c305e325d007..bb9928153ff0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -111,6 +111,12 @@ ethphy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,led-modes = <
+ DP83867_LED_SEL_LINK
+ DP83867_LED_SEL_LINK_1000BT
+ DP83867_LED_SEL_LINK_ACT
+ DP83867_LED_SEL_LINK
+ >;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 11481e09c75b..d7de555cf5e1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -253,6 +253,12 @@ ethphy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,led-modes = <
+ DP83867_LED_SEL_LINK
+ DP83867_LED_SEL_LINK_1000BT
+ DP83867_LED_SEL_LINK_ACT
+ DP83867_LED_SEL_LINK
+ >;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 97582db71ca8..8e61966c8dd0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -248,6 +248,12 @@ ethphy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,led-modes = <
+ DP83867_LED_SEL_LINK
+ DP83867_LED_SEL_LINK_1000BT
+ DP83867_LED_SEL_LINK_ACT
+ DP83867_LED_SEL_LINK
+ >;
tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
--
2.25.1
next prev parent reply other threads:[~2022-11-18 0:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 0:15 [PATCH 0/3] add dt configuration for dp83867 led modes Tim Harvey
2022-11-18 0:15 ` [PATCH 1/3] dt-bindings: net: phy: dp83867: add LED mode property Tim Harvey
2022-11-18 3:56 ` Rob Herring
2022-11-18 0:15 ` [PATCH 2/3] net: phy: dp83867: add LED mode configuration via dt Tim Harvey
2022-11-18 0:15 ` Tim Harvey [this message]
2022-11-18 0:27 ` [PATCH 0/3] add dt configuration for dp83867 led modes Andrew Lunn
2022-11-18 0:54 ` Tim Harvey
2022-11-18 13:11 ` Andrew Lunn
2022-11-18 19:57 ` Tim Harvey
2022-11-20 23:35 ` Andrew Lunn
2022-12-01 18:26 ` Tim Harvey
2022-12-01 18:31 ` Christian Marangi
2022-12-01 18:35 ` Tim Harvey
2022-12-01 18:38 ` Christian Marangi
2022-12-01 19:40 ` Andrew Lunn
2022-12-07 10:40 ` Alexander Stein
2022-12-07 10:48 ` Rasmus Villemoes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118001548.635752-4-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®