From: Gabriel Somlo <gsomlo@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-serial@vger.kernel.org, gregkh@linuxfoundation.org,
jirislaby@kernel.org, kgugala@antmicro.com,
mholenko@antmicro.com, joel@jms.id.au,
david.abdurachmanov@gmail.com, florent@enjoy-digital.fr,
geert@linux-m68k.org, ilpo.jarvinen@linux.intel.com
Subject: [PATCH v5 12/14] serial: liteuart: add IRQ support for the RX path
Date: Fri, 18 Nov 2022 09:55:10 -0500 [thread overview]
Message-ID: <20221118145512.509950-13-gsomlo@gmail.com> (raw)
In-Reply-To: <20221118145512.509950-1-gsomlo@gmail.com>
Add support for IRQ-driven RX. Support for the TX path will be added
in a separate commit.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
Changes from v4:
- using dev_err() instead of a combo of pr_err() and pr_fmt()
- dropped "get irq" comment in probe()
> Changes from v3:
> - add shadow irq register to support polling mode and avoid reading
> hardware mmio irq register to learn which irq flags are enabled
> - this also simplifies both liteuart_interrupt() and liteuart_startup()
drivers/tty/serial/liteuart.c | 76 +++++++++++++++++++++++++++++++----
1 file changed, 69 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 8a6e176be08e..678c37c952cf 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -7,6 +7,7 @@
#include <linux/bits.h>
#include <linux/console.h>
+#include <linux/interrupt.h>
#include <linux/litex.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -46,6 +47,7 @@ struct liteuart_port {
struct uart_port port;
struct timer_list timer;
u32 id;
+ u8 irq_reg;
};
#define to_liteuart_port(port) container_of(port, struct liteuart_port, port)
@@ -76,6 +78,19 @@ static void liteuart_putchar(struct uart_port *port, unsigned char ch)
litex_write8(port->membase + OFF_RXTX, ch);
}
+static void liteuart_update_irq_reg(struct uart_port *port, bool set, u8 mask)
+{
+ struct liteuart_port *uart = to_liteuart_port(port);
+
+ if (set)
+ uart->irq_reg |= mask;
+ else
+ uart->irq_reg &= ~mask;
+
+ if (port->irq)
+ litex_write8(port->membase + OFF_EV_ENABLE, uart->irq_reg);
+}
+
static void liteuart_stop_tx(struct uart_port *port)
{
}
@@ -129,13 +144,27 @@ static void liteuart_rx_chars(struct uart_port *port)
tty_flip_buffer_push(&port->state->port);
}
+static irqreturn_t liteuart_interrupt(int irq, void *data)
+{
+ struct liteuart_port *uart = data;
+ struct uart_port *port = &uart->port;
+ u8 isr;
+
+ spin_lock(&port->lock);
+ isr = litex_read8(port->membase + OFF_EV_PENDING) & uart->irq_reg;
+ if (isr & EV_RX)
+ liteuart_rx_chars(port);
+ spin_unlock(&port->lock);
+
+ return IRQ_RETVAL(isr);
+}
+
static void liteuart_timer(struct timer_list *t)
{
struct liteuart_port *uart = from_timer(uart, t, timer);
struct uart_port *port = &uart->port;
- liteuart_rx_chars(port);
-
+ liteuart_interrupt(0, port);
mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
}
@@ -161,19 +190,46 @@ static unsigned int liteuart_get_mctrl(struct uart_port *port)
static int liteuart_startup(struct uart_port *port)
{
struct liteuart_port *uart = to_liteuart_port(port);
+ unsigned long flags;
+ int ret;
- /* disable events */
- litex_write8(port->membase + OFF_EV_ENABLE, 0);
+ if (port->irq) {
+ ret = request_irq(port->irq, liteuart_interrupt, 0,
+ KBUILD_MODNAME, uart);
+ if (ret) {
+ dev_err(port->dev,
+ "line %d irq %d failed: switch to polling\n",
+ port->line, port->irq);
+ port->irq = 0;
+ }
+ }
- /* prepare timer for polling */
- timer_setup(&uart->timer, liteuart_timer, 0);
- mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
+ spin_lock_irqsave(&port->lock, flags);
+ /* only enabling rx irqs during startup */
+ liteuart_update_irq_reg(port, true, EV_RX);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (!port->irq) {
+ timer_setup(&uart->timer, liteuart_timer, 0);
+ mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
+ }
return 0;
}
static void liteuart_shutdown(struct uart_port *port)
{
+ struct liteuart_port *uart = to_liteuart_port(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ liteuart_update_irq_reg(port, false, EV_RX | EV_TX);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (port->irq)
+ free_irq(port->irq, port);
+ else
+ del_timer_sync(&uart->timer);
}
static void liteuart_set_termios(struct uart_port *port, struct ktermios *new,
@@ -262,6 +318,12 @@ static int liteuart_probe(struct platform_device *pdev)
goto err_erase_id;
}
+ ret = platform_get_irq_optional(pdev, 0);
+ if (ret < 0 && ret != -ENXIO)
+ return ret;
+ if (ret > 0)
+ port->irq = ret;
+
/* values not from device tree */
port->dev = &pdev->dev;
port->iotype = UPIO_MEM;
--
2.38.1
next prev parent reply other threads:[~2022-11-18 14:57 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 14:54 [PATCH v5 00/14] serial: liteuart: add IRQ support Gabriel Somlo
2022-11-18 14:54 ` [PATCH v5 01/14] serial: liteuart: use KBUILD_MODNAME as driver name Gabriel Somlo
2022-11-21 9:45 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 02/14] serial: liteuart: use bit number macros Gabriel Somlo
2022-11-21 9:45 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 03/14] serial: liteuart: remove unused uart_ops stubs Gabriel Somlo
2022-11-21 9:49 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 04/14] serial: liteuart: don't set unused port fields Gabriel Somlo
2022-11-21 9:53 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 05/14] serial: liteuart: minor style fix in liteuart_init() Gabriel Somlo
2022-11-21 9:53 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 06/14] serial: liteuart: move tty_flip_buffer_push() out of rx loop Gabriel Somlo
2022-11-21 9:55 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 07/14] serial: liteuart: rx loop should only ack rx events Gabriel Somlo
2022-11-18 14:55 ` [PATCH v5 08/14] serial: liteuart: simplify passing of uart_insert_char() flag Gabriel Somlo
2022-11-21 9:56 ` Geert Uytterhoeven
2022-11-18 14:55 ` [PATCH v5 09/14] serial: liteuart: fix rx loop variable types Gabriel Somlo
2022-11-21 8:37 ` Jiri Slaby
2022-11-21 8:42 ` Jiri Slaby
2022-11-21 8:45 ` Jiri Slaby
2022-11-21 13:55 ` Gabriel L. Somlo
2022-11-22 7:37 ` Jiri Slaby
2022-11-22 21:05 ` Gabriel L. Somlo
2022-11-23 5:39 ` Jiri Slaby
2022-11-18 14:55 ` [PATCH v5 10/14] serial: liteuart: separate rx loop from poll timer Gabriel Somlo
2022-11-21 10:16 ` Geert Uytterhoeven
2022-11-21 16:44 ` Gabriel L. Somlo
2022-11-18 14:55 ` [PATCH v5 11/14] serial: liteuart: move function definitions Gabriel Somlo
2022-11-21 10:17 ` Geert Uytterhoeven
2022-11-18 14:55 ` Gabriel Somlo [this message]
2022-11-21 8:54 ` [PATCH v5 12/14] serial: liteuart: add IRQ support for the RX path Jiri Slaby
2022-11-21 18:50 ` Gabriel L. Somlo
2022-11-22 7:44 ` Jiri Slaby
2022-11-22 9:54 ` Geert Uytterhoeven
2022-11-22 19:41 ` Gabriel L. Somlo
2022-11-18 14:55 ` [PATCH v5 13/14] serial: liteuart: add IRQ support for the TX path Gabriel Somlo
2022-11-21 8:58 ` Jiri Slaby
2022-11-21 14:07 ` Gabriel L. Somlo
2022-11-18 14:55 ` [PATCH v5 14/14] serial: liteuart: move polling putchar() function Gabriel Somlo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118145512.509950-13-gsomlo@gmail.com \
--to=gsomlo@gmail.com \
--cc=david.abdurachmanov@gmail.com \
--cc=florent@enjoy-digital.fr \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=joel@jms.id.au \
--cc=kgugala@antmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mholenko@antmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®