[PATCH 1/2] mtd: spi-nore: core: Add in framework for 8S-8S-8S Octal STR mode

[Nathan Barrett-Morrison <nathan.morrison@timesys.com>]

While trying to bring up an Octal SPI device in STR mode, I found
that there is currently no support for 8S-8S-8S.  This patch adds
the necessary, additional logic for doing so.

Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
---
 drivers/mtd/spi-nor/core.c | 57 ++++++++++++++++++++++++++++++++++++--
 drivers/mtd/spi-nor/core.h |  5 +++-
 2 files changed, 59 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index bee8fc4c9f07..66665c1bebd7 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2253,7 +2253,8 @@ static int spi_nor_set_addr_nbytes(struct spi_nor *nor)
 {
 	if (nor->params->addr_nbytes) {
 		nor->addr_nbytes = nor->params->addr_nbytes;
-	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
+	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR ||
+		   nor->read_proto == SNOR_PROTO_8_8_8) {
 		/*
 		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
 		 * in this protocol an odd addr_nbytes cannot be used because
@@ -2335,7 +2336,7 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_erase_map *map = &params->erase_map;
-	const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
+	const u16 no_sfdp_flags = nor->info->no_sfdp_flags;
 	u8 i, erase_mask;
 
 	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
@@ -2359,6 +2360,13 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 					  SNOR_PROTO_1_1_8);
 	}
 
+	if (no_sfdp_flags & SPI_NOR_OCTAL_STR_READ) {
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8;
+		spi_nor_set_read_settings(&params->reads[SNOR_HWCAPS_READ_8_8_8],
+					  0, 20, SPINOR_OP_READ_FAST,
+					  SNOR_PROTO_8_8_8);
+	}
+
 	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8_DTR],
@@ -2366,6 +2374,12 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 					  SNOR_PROTO_8_8_8_DTR);
 	}
 
+	if (no_sfdp_flags & SPI_NOR_OCTAL_STR_PP) {
+		params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8;
+		spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8],
+					SPINOR_OP_PP, SNOR_PROTO_8_8_8);
+	}
+
 	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
 		params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
 		/*
@@ -2631,6 +2645,38 @@ static int spi_nor_init_params(struct spi_nor *nor)
 	return 0;
 }
 
+/** spi_nor_octal_str_enable() - enable Octal STR I/O if needed
+ * @nor:                 pointer to a 'struct spi_nor'
+ * @enable:              whether to enable or disable Octal STR
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_octal_str_enable(struct spi_nor *nor, bool enable)
+{
+	int ret;
+
+	if (!nor->params->octal_str_enable)
+		return 0;
+
+	if (!(nor->read_proto == SNOR_PROTO_8_8_8 &&
+	      nor->write_proto == SNOR_PROTO_8_8_8))
+		return 0;
+
+	if (!(nor->flags & SNOR_F_IO_MODE_EN_VOLATILE))
+		return 0;
+
+	ret = nor->params->octal_str_enable(nor, enable);
+	if (ret)
+		return ret;
+
+	if (enable)
+		nor->reg_proto = SNOR_PROTO_8_8_8;
+	else
+		nor->reg_proto = SNOR_PROTO_1_1_1;
+
+	return 0;
+}
+
 /** spi_nor_octal_dtr_enable() - enable Octal DTR I/O if needed
  * @nor:                 pointer to a 'struct spi_nor'
  * @enable:              whether to enable or disable Octal DTR
@@ -2691,6 +2737,12 @@ static int spi_nor_init(struct spi_nor *nor)
 		return err;
 	}
 
+	err = spi_nor_octal_str_enable(nor, true);
+	if (err) {
+		dev_dbg(nor->dev, "octal STR mode not supported\n");
+		return err;
+	}
+
 	err = spi_nor_quad_enable(nor);
 	if (err) {
 		dev_dbg(nor->dev, "quad mode not supported\n");
@@ -2714,6 +2766,7 @@ static int spi_nor_init(struct spi_nor *nor)
 
 	if (nor->addr_nbytes == 4 &&
 	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
+	    nor->read_proto != SNOR_PROTO_8_8_8 &&
 	    !(nor->flags & SNOR_F_4B_OPCODES)) {
 		/*
 		 * If the RESET# pin isn't hooked up properly, or the system
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 85b0cf254e97..56795db872c2 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -359,6 +359,7 @@ struct spi_nor_otp {
  *                      Table.
  * @otp:		SPI NOR OTP info.
  * @octal_dtr_enable:	enables SPI NOR octal DTR mode.
+ * @octal_str_enable:	enables SPI NOR octal STR mode.
  * @quad_enable:	enables SPI NOR quad mode.
  * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
  * @convert_addr:	converts an absolute address into something the flash
@@ -508,7 +509,7 @@ struct flash_info {
 #define NO_CHIP_ERASE			BIT(7)
 #define SPI_NOR_NO_FR			BIT(8)
 
-	u8 no_sfdp_flags;
+	u16 no_sfdp_flags;
 #define SPI_NOR_SKIP_SFDP		BIT(0)
 #define SECT_4K				BIT(1)
 #define SPI_NOR_DUAL_READ		BIT(3)
@@ -516,6 +517,8 @@ struct flash_info {
 #define SPI_NOR_OCTAL_READ		BIT(5)
 #define SPI_NOR_OCTAL_DTR_READ		BIT(6)
 #define SPI_NOR_OCTAL_DTR_PP		BIT(7)
+#define SPI_NOR_OCTAL_STR_READ		BIT(8)
+#define SPI_NOR_OCTAL_STR_PP		BIT(9)
 
 	u8 fixup_flags;
 #define SPI_NOR_4B_OPCODES		BIT(0)
-- 
2.30.2