[PATCH] serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()

[Yi Yang <yiyang13@huawei.com>]

Add the missing clk_disable_unprepare() before return from
tegra_uart_hw_init() in the error handling path.

Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs")
Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
---
 drivers/tty/serial/serial-tegra.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index e5b9773db5e3..abc5039eb273 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1046,6 +1046,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	if (tup->cdata->fifo_mode_enable_status) {
 		ret = tegra_uart_wait_fifo_mode_enabled(tup);
 		if (ret < 0) {
+			clk_disable_unprepare(tup->uart_clk);
 			dev_err(tup->uport.dev,
 				"Failed to enable FIFO mode: %d\n", ret);
 			return ret;
@@ -1067,6 +1068,7 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	 */
 	ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
 	if (ret < 0) {
+		clk_disable_unprepare(tup->uart_clk);
 		dev_err(tup->uport.dev, "Failed to set baud rate\n");
 		return ret;
 	}
-- 
2.17.1