From: Georgi Vlaev <g-vlaev@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Santosh Shilimkar <ssantosh@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Vibhore Vardhan <vibhore@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Roger Quadros <rogerq@kernel.org>, Georgi Vlaev <g-vlaev@ti.com>
Subject: [PATCH v5 3/6] firmware: ti_sci: Add support for querying the firmware caps
Date: Mon, 28 Nov 2022 16:05:19 +0200 [thread overview]
Message-ID: <20221128140522.49474-4-g-vlaev@ti.com> (raw)
In-Reply-To: <20221128140522.49474-1-g-vlaev@ti.com>
This patch adds support for the TISCI_MSG_QUERY_FW_CAPS
message, used to retrieve the firmware capabilities of the
currently running system firmware. The message belongs to
the TISCI general core message API [1] and is available in
SysFW version 08.04.03 and above. Currently, the message is
supported on devices with split architecture of the system
firmware (DM + TIFS) like AM62x. Old revisions or not yet
supported platforms will NACK this request.
We're using this message locally in ti_sci.c to get the low
power featutes of the FW/SoC. As there's no other kernel
consumers yet, this is not added to struct ti_sci_core_ops.
[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
---
drivers/firmware/ti_sci.c | 56 +++++++++++++++++++++++++++++++++++++++
drivers/firmware/ti_sci.h | 26 ++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index bace9e9cd478..caa7b9d2bd48 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1726,6 +1726,62 @@ static int ti_sci_cmd_prepare_sleep(const struct ti_sci_handle *handle, u8 mode,
return ret;
}
+/**
+ * ti_sci_msg_cmd_query_fw_caps() - Get the FW/SoC capabilities
+ * @handle: Pointer to TI SCI handle
+ * @fw_caps: Each bit in fw_caps indicating one FW/SOC capability
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_msg_cmd_query_fw_caps(const struct ti_sci_handle *handle,
+ u64 *fw_caps)
+{
+ struct ti_sci_info *info;
+ struct ti_sci_xfer *xfer;
+ struct ti_sci_msg_resp_query_fw_caps *resp;
+ struct device *dev;
+ int ret = 0;
+
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_ti_sci_info(handle);
+ dev = info->dev;
+
+ xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_QUERY_FW_CAPS,
+ TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+ sizeof(struct ti_sci_msg_hdr),
+ sizeof(*resp));
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "Message alloc failed(%d)\n", ret);
+ return ret;
+ }
+
+ ret = ti_sci_do_xfer(info, xfer);
+ if (ret) {
+ dev_err(dev, "Mbox send fail %d\n", ret);
+ goto fail;
+ }
+
+ resp = (struct ti_sci_msg_resp_query_fw_caps *)xfer->xfer_buf;
+
+ if (!ti_sci_is_response_ack(resp)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ if (fw_caps)
+ *fw_caps = resp->fw_caps;
+
+fail:
+ ti_sci_put_one_xfer(&info->minfo, xfer);
+
+ return ret;
+}
+
/**
* ti_sci_msg_cmd_lpm_wake_reason() - Get the wakeup source from LPM
* @handle: Pointer to TI SCI handle
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index e4bfe146c43d..d5b23d91b9b9 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -19,6 +19,7 @@
#define TI_SCI_MSG_WAKE_REASON 0x0003
#define TI_SCI_MSG_GOODBYE 0x0004
#define TI_SCI_MSG_SYS_RESET 0x0005
+#define TI_SCI_MSG_QUERY_FW_CAPS 0x0022
/* Device requests */
#define TI_SCI_MSG_SET_DEVICE_STATE 0x0200
@@ -137,6 +138,31 @@ struct ti_sci_msg_req_reboot {
struct ti_sci_msg_hdr hdr;
} __packed;
+/**
+ * struct ti_sci_msg_resp_query_fw_caps - Response for query firmware caps
+ * @hdr: Generic header
+ * @fw_caps: Each bit in fw_caps indicating one FW/SOC capability
+ * MSG_FLAG_CAPS_GENERIC: Generic capability (LPM not supported)
+ * MSG_FLAG_CAPS_LPM_DEEP_SLEEP: Deep Sleep LPM
+ * MSG_FLAG_CAPS_LPM_MCU_ONLY: MCU only LPM
+ * MSG_FLAG_CAPS_LPM_STANDBY: Standby LPM
+ * MSG_FLAG_CAPS_LPM_PARTIAL_IO: Partial IO in LPM
+ *
+ * Response to a generic message with message type TI_SCI_MSG_QUERY_FW_CAPS
+ * providing currently available SOC/firmware capabilities. SoC that don't
+ * support low power modes return only MSG_FLAG_CAPS_GENERIC capability.
+ */
+struct ti_sci_msg_resp_query_fw_caps {
+ struct ti_sci_msg_hdr hdr;
+#define MSG_FLAG_CAPS_GENERIC TI_SCI_MSG_FLAG(0)
+#define MSG_FLAG_CAPS_LPM_DEEP_SLEEP TI_SCI_MSG_FLAG(1)
+#define MSG_FLAG_CAPS_LPM_MCU_ONLY TI_SCI_MSG_FLAG(2)
+#define MSG_FLAG_CAPS_LPM_STANDBY TI_SCI_MSG_FLAG(3)
+#define MSG_FLAG_CAPS_LPM_PARTIAL_IO TI_SCI_MSG_FLAG(4)
+#define MSG_MASK_CAPS_LPM GENMASK_ULL(4, 1)
+ u64 fw_caps;
+} __packed;
+
/**
* struct ti_sci_msg_req_set_device_state - Set the desired state of the device
* @hdr: Generic header
--
2.30.2
next prev parent reply other threads:[~2022-11-28 14:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-28 14:05 [PATCH v5 0/5] firmware: ti_sci: Introduce system suspend support Georgi Vlaev
2022-11-28 14:05 ` [PATCH v5 1/6] dt-bindings: ti, sci: Add lpm region and firmware-name Georgi Vlaev
2022-11-28 14:05 ` [PATCH v5 2/6] firmware: ti_sci: Introduce Power Management Ops Georgi Vlaev
2022-11-28 14:05 ` Georgi Vlaev [this message]
2022-11-28 14:05 ` [PATCH v5 4/6] firmware: ti_sci: Allocate memory for the LPM modes Georgi Vlaev
2022-11-28 14:05 ` [PATCH v5 5/6] firmware: ti_sci: Use dt provided fw name and address to load at suspend time Georgi Vlaev
2022-11-28 14:05 ` [PATCH v5 6/6] firmware: ti_sci: Introduce prepare system suspend call Georgi Vlaev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221128140522.49474-4-g-vlaev@ti.com \
--to=g-vlaev@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@kernel.org \
--cc=ssantosh@kernel.org \
--cc=vibhore@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®