From: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
To: unlisted-recipients:; (no To-header on input)
Cc: nathan.morrison@timesys.com, greg.malysa@timesys.com,
Tudor Ambarus <tudor.ambarus@microchip.com>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <michael@walle.cc>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-mtd@lists.infradead.org (open list:SPI NOR SUBSYSTEM),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 2/3] mtd: spi-nor: Add additional octal-mode flags to be checked during SFDP
Date: Thu, 1 Dec 2022 16:27:49 -0500 [thread overview]
Message-ID: <20221201212750.267721-3-nathan.morrison@timesys.com> (raw)
In-Reply-To: <20221201212750.267721-1-nathan.morrison@timesys.com>
This adds some support for searching a chips SFDP table for:
read commands: 1S-8S-8S
program commands: 1S-1S-8S, 1S-8S-8S
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
---
drivers/mtd/spi-nor/core.c | 8 ++++++++
drivers/mtd/spi-nor/core.h | 5 +++--
drivers/mtd/spi-nor/sfdp.c | 8 ++++++++
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index bee8fc4c9f07..2f882608abc6 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2359,6 +2359,13 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
SNOR_PROTO_1_1_8);
}
+ if (no_sfdp_flags & SPI_NOR_OCTAL_READ_1_8_8) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_8_8;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_8_8],
+ 0, 16, SPINOR_OP_READ_1_8_8,
+ SNOR_PROTO_1_8_8);
+ }
+
if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_8_8_8_DTR],
@@ -2514,6 +2521,7 @@ static void spi_nor_init_params_deprecated(struct spi_nor *nor)
if (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ |
SPI_NOR_OCTAL_READ |
+ SPI_NOR_OCTAL_READ_1_8_8 |
SPI_NOR_OCTAL_DTR_READ))
spi_nor_sfdp_init_params_deprecated(nor);
}
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 85b0cf254e97..7bc1cde049b7 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -514,8 +514,9 @@ struct flash_info {
#define SPI_NOR_DUAL_READ BIT(3)
#define SPI_NOR_QUAD_READ BIT(4)
#define SPI_NOR_OCTAL_READ BIT(5)
-#define SPI_NOR_OCTAL_DTR_READ BIT(6)
-#define SPI_NOR_OCTAL_DTR_PP BIT(7)
+#define SPI_NOR_OCTAL_READ_1_8_8 BIT(6)
+#define SPI_NOR_OCTAL_DTR_READ BIT(7)
+#define SPI_NOR_OCTAL_DTR_PP BIT(8)
u8 fixup_flags;
#define SPI_NOR_4B_OPCODES BIT(0)
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index e4e87815ba94..e1b7547bf81e 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1089,6 +1089,14 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4],
SPINOR_OP_PP_1_4_4_4B,
SNOR_PROTO_1_4_4);
+ if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_8)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_8],
+ SPINOR_OP_PP_1_1_8_4B,
+ SNOR_PROTO_1_1_8);
+ if (pp_hwcaps & SNOR_HWCAPS_PP_1_8_8)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_8_8],
+ SPINOR_OP_PP_1_8_8_4B,
+ SNOR_PROTO_1_8_8);
for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
if (erase_mask & BIT(i))
--
2.30.2
next prev parent reply other threads:[~2022-12-01 21:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 21:27 [PATCH v3 0/3] mtd: spi-nor: Extend SFDP to support additional octal modes as per latest JEDEC standard Nathan Barrett-Morrison
2022-12-01 21:27 ` [PATCH v3 1/3] mtd: spi-nor: Extend SFDP 4byte address instruction lookup table with new octal modes as per JEDEC JESD216F Nathan Barrett-Morrison
2022-12-01 21:27 ` Nathan Barrett-Morrison [this message]
2022-12-01 22:08 ` [PATCH v3 2/3] mtd: spi-nor: Add additional octal-mode flags to be checked during SFDP Michael Walle
2022-12-01 21:27 ` [PATCH v3 3/3] mtd: spi-nor: Add support for IS25LX256 operating in 1S-8S-8S octal read mode Nathan Barrett-Morrison
2022-12-01 22:12 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221201212750.267721-3-nathan.morrison@timesys.com \
--to=nathan.morrison@timesys.com \
--cc=greg.malysa@timesys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®