From: Coco Li <lixiaoyan@google.com>
To: "David S . Miller" <davem@davemloft.net>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
David Ahern <dsahern@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Michael Chan <michael.chan@broadcom.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Coco Li <lixiaoyan@google.com>
Subject: [PATCH net-next v6 1/2] IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
Date: Sat, 10 Dec 2022 04:16:45 +0000 [thread overview]
Message-ID: <20221210041646.3587757-1-lixiaoyan@google.com> (raw)
IPv6/TCP and GRO stacks can build big TCP packets with an added
temporary Hop By Hop header.
Is GSO is not involved, then the temporary header needs to be removed in
the driver. This patch provides a generic helper for drivers that need
to modify their headers in place.
Tested:
Compiled and ran with ethtool -K eth1 tso off
Could send Big TCP packets
Signed-off-by: Coco Li <lixiaoyan@google.com>
---
include/net/ipv6.h | 33 +++++++++++++++++++++++++++++++++
net/ipv6/ip6_offload.c | 27 ++++-----------------------
2 files changed, 37 insertions(+), 23 deletions(-)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index d383c895592a..03f3af02a9a6 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -500,6 +500,39 @@ static inline int ipv6_has_hopopt_jumbo(const struct sk_buff *skb)
return jhdr->nexthdr;
}
+/* Return 0 if HBH header is successfully removed
+ * Or if HBH removal is unnecessary (packet is not big TCP)
+ * Return error to indicate dropping the packet
+ */
+static inline int ipv6_hopopt_jumbo_remove(struct sk_buff *skb)
+{
+ const int hophdr_len = sizeof(struct hop_jumbo_hdr);
+ int nexthdr = ipv6_has_hopopt_jumbo(skb);
+ struct ipv6hdr *h6;
+
+ if (!nexthdr)
+ return 0;
+
+ if (skb_cow_head(skb, 0))
+ return -1;
+
+ /* Remove the HBH header.
+ * Layout: [Ethernet header][IPv6 header][HBH][L4 Header]
+ */
+ memmove(skb_mac_header(skb) + hophdr_len, skb_mac_header(skb),
+ skb_network_header(skb) - skb_mac_header(skb) +
+ sizeof(struct ipv6hdr));
+
+ __skb_pull(skb, hophdr_len);
+ skb->network_header += hophdr_len;
+ skb->mac_header += hophdr_len;
+
+ h6 = ipv6_hdr(skb);
+ h6->nexthdr = nexthdr;
+
+ return 0;
+}
+
static inline bool ipv6_accept_ra(struct inet6_dev *idev)
{
/* If forwarding is enabled, RA are not accepted unless the special
diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c
index 3ee345672849..00dc2e3b0184 100644
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -77,7 +77,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,
struct sk_buff *segs = ERR_PTR(-EINVAL);
struct ipv6hdr *ipv6h;
const struct net_offload *ops;
- int proto, nexthdr;
+ int proto, err;
struct frag_hdr *fptr;
unsigned int payload_len;
u8 *prevhdr;
@@ -87,28 +87,9 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,
bool gso_partial;
skb_reset_network_header(skb);
- nexthdr = ipv6_has_hopopt_jumbo(skb);
- if (nexthdr) {
- const int hophdr_len = sizeof(struct hop_jumbo_hdr);
- int err;
-
- err = skb_cow_head(skb, 0);
- if (err < 0)
- return ERR_PTR(err);
-
- /* remove the HBH header.
- * Layout: [Ethernet header][IPv6 header][HBH][TCP header]
- */
- memmove(skb_mac_header(skb) + hophdr_len,
- skb_mac_header(skb),
- ETH_HLEN + sizeof(struct ipv6hdr));
- skb->data += hophdr_len;
- skb->len -= hophdr_len;
- skb->network_header += hophdr_len;
- skb->mac_header += hophdr_len;
- ipv6h = (struct ipv6hdr *)skb->data;
- ipv6h->nexthdr = nexthdr;
- }
+ err = ipv6_hopopt_jumbo_remove(skb);
+ if (err)
+ return ERR_PTR(err);
nhoff = skb_network_header(skb) - skb_mac_header(skb);
if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
goto out;
--
2.39.0.rc1.256.g54fd8350bd-goog
next reply other threads:[~2022-12-10 4:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-10 4:16 Coco Li [this message]
2022-12-10 4:16 ` [RFC net-next v6 2/2] bnxt: Use generic HBH removal helper in tx path Coco Li
2022-12-11 5:07 ` Michael Chan
2022-12-13 0:00 ` [PATCH net-next v6 1/2] IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221210041646.3587757-1-lixiaoyan@google.com \
--to=lixiaoyan@google.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®