From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: linux-arm-msm@vger.kernel.org, andersson@kernel.org,
agross@kernel.org, krzysztof.kozlowski@linaro.org
Cc: patches@linaro.org, Konrad Dybcio <konrad.dybcio@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: qcom: msm8996-tone: Move status last
Date: Sat, 10 Dec 2022 15:10:00 +0100 [thread overview]
Message-ID: <20221210141000.14344-2-konrad.dybcio@linaro.org> (raw)
In-Reply-To: <20221210141000.14344-1-konrad.dybcio@linaro.org>
Align the style with other boards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../dts/qcom/msm8996-sony-xperia-tone.dtsi | 26 ++++++++-----------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index c9be32b81d36..40b28489d3f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -100,8 +100,8 @@ wlan_en: wlan-en-1-8v {
};
&blsp1_i2c3 {
- status = "okay";
clock-frequency = <355000>;
+ status = "okay";
tof_sensor: vl53l0x@29 {
compatible = "st,vl53l0x";
@@ -114,15 +114,15 @@ &blsp1_uart2 {
};
&blsp2_i2c5 {
- status = "okay";
clock-frequency = <355000>;
+ status = "okay";
/* FUSB301 USB-C controller */
};
&blsp2_i2c6 {
- status = "okay";
clock-frequency = <355000>;
+ status = "okay";
synaptics@2c {
compatible = "syna,rmi4-i2c";
@@ -179,11 +179,10 @@ &camera2_rst {
};
&hsusb_phy1 {
- status = "okay";
-
vdd-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
vdda-phy-dpdm-supply = <&pm8994_l24>;
+ status = "okay";
};
&mmcc {
@@ -191,18 +190,17 @@ &mmcc {
};
&pcie0 {
- status = "okay";
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&pm8994_l28>;
+ status = "okay";
};
&pcie_phy {
- status = "okay";
-
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
+ status = "okay";
};
&pm8994_gpios {
@@ -474,8 +472,8 @@ rf-id-mpp-pins {
};
&pm8994_resin {
- status = "okay";
linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
};
&pmi8994_gpios {
@@ -619,9 +617,9 @@ pmi8994_s2: s2 {
};
&pmi8994_wled {
- status = "okay";
default-brightness = <512>;
qcom,num-strings = <3>;
+ status = "okay";
};
&rpm_requests {
@@ -821,20 +819,18 @@ pm8994_l32: l32 {
};
&sdhc1 {
- status = "okay";
-
vmmc-supply = <&pm8994_l20>;
vqmmc-supply = <&pm8994_s4>;
mmc-hs400-1_8v;
mmc-hs200-1_8v;
+ status = "okay";
};
&sdhc2 {
- status = "okay";
-
cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&pm8994_l21>;
vqmmc-supply = <&pm8994_l13>;
+ status = "okay";
};
&tlmm {
@@ -943,8 +939,8 @@ touch_int_sleep: touch-int-sleep-state {
* 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
*/
&usb3 {
- status = "okay";
qcom,select-utmi-as-pipe-clk;
+ status = "okay";
};
&usb3_dwc3 {
--
2.38.1
next prev parent reply other threads:[~2022-12-10 15:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-10 14:09 [PATCH 1/2] arm64: dts: qcom: msm8996-tone: Enable SDHCI1 Konrad Dybcio
2022-12-10 14:10 ` Konrad Dybcio [this message]
2022-12-28 4:36 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221210141000.14344-2-konrad.dybcio@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®