mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marijn Suijten <marijn.suijten@somainline.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, andersson@kernel.org,
	agross@kernel.org, krzysztof.kozlowski@linaro.org,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: sm8350-sagami: Rectify GPIO keys
Date: Thu, 22 Dec 2022 20:02:59 +0100	[thread overview]
Message-ID: <20221222190259.hdo7sqtucvip67i7@SoMainline.org> (raw)
In-Reply-To: <20221213120943.165452-1-konrad.dybcio@linaro.org>

On 2022-12-13 13:09:43, Konrad Dybcio wrote:
> With enough pins set properly, the hardware buttons now also work
> like a charm.
> 
> Fixes: c2721b0c23d9 ("arm64: dts: qcom: Add support for Xperia 1 III / 5 III")
> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Xperia 5 III
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> Changes in v2:
> - Look at the 1 III again, realize there's a recessed button, add it
> to the common DT to make it work on both devices.. (Marijn)
> 
>  .../dts/qcom/sm8350-sony-xperia-sagami.dtsi   | 64 ++++++++++++++++++-
>  1 file changed, 63 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> index d73e1f3fa501..2f727e4f2e57 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> @@ -49,7 +49,35 @@ framebuffer: framebuffer@e1000000 {
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  
> -		/* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
> +
> +		key-camera-focus {
> +			label = "Camera Focus";
> +			linux,code = <KEY_CAMERA_FOCUS>;
> +			gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			gpio-key,wakeup;

I just found out that this property is deprecated in favour of
wakeup-source.  The one you use doesn't pass bindings validation anyway.

After fixing that:

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>

- Marijn

> +		};
> +
> +		key-camera-snapshot {
> +			label = "Camera Snapshot";
> +			linux,code = <KEY_CAMERA>;
> +			gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			gpio-key,wakeup;
> +		};
> +
> +		key-google-assist {
> +			label = "Google Assistant Key";
> +			gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_LEFTMETA>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			gpio-key,wakeup;
> +		};
>  
>  		key-vol-down {
>  			label = "Volume Down";
> @@ -545,6 +573,32 @@ &pm8350_gpios {
>  			  "NC",
>  			  "G_ASSIST_N",
>  			  "PM8350_OPTION"; /* GPIO_10 */
> +
> +	g_assist_n: g-assist-n-state {
> +		pins = "gpio9";
> +		function = "normal";
> +		power-source = <1>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +};
> +
> +&pm8350b_gpios {
> +	snapshot_n: snapshot-n-state {
> +		pins = "gpio5";
> +		function = "normal";
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +
> +	focus_n: focus-n-state {
> +		pins = "gpio8";
> +		function = "normal";
> +		power-source = <0>;
> +		input-enable;
> +		bias-pull-up;
> +	};
>  };
>  
>  &pmk8350_gpios {
> @@ -552,6 +606,14 @@ &pmk8350_gpios {
>  			  "NC",
>  			  "VOL_DOWN_N",
>  			  "PMK8350_OPTION";
> +
> +	vol_down_n: vol-down-n-state {
> +		pins = "gpio3";
> +		function = "normal";
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
>  };
>  
>  &pmk8350_rtc {
> -- 
> 2.39.0
> 

      parent reply	other threads:[~2022-12-22 19:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-13 12:09 Konrad Dybcio
2022-12-13 12:26 ` Marijn Suijten
2022-12-22 19:02 ` Marijn Suijten [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221222190259.hdo7sqtucvip67i7@SoMainline.org \
    --to=marijn.suijten@somainline.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®