[PATCH v5 0/2] arm64: dts: mt8195: Add Ethernet controller

[Biao Huang <biao.huang@mediatek.com>]

Changes in v5:
1. reorder the clocks as Angelo's comments
2. add a driver patch to fix rgmii-id issue, then we can
use a ususal way rgmii/rgmii-id as Andrew's comments.

Changes in v4:
1. remove {address,size}-cells = <0> to avoid warning as Angelo's feedback.
2. Add reviewd-by as Angelo's comments.

Changes in v3:
1. move stmmac-axi-config, rx-queues-config, tx-queues-configs inside ethernet node
as Angelo's comments.
2. add {address,size}-cells = <0> in ethernet node as Angelo's comments.

Changes in v2:
1. modify pinctrl node used by ethernet to match rules in pinctrl-mt8195.yaml,
which is pointed by Krzysztof.
2. remove "mac-address" property in ethernet node as comments of Krzysztof.

Changes in v1:
add dts node for MT8195 Ethernet controller

Biao Huang (2):
  stmmac: dwmac-mediatek: enable 2ns delay only for special cases
  arm64: dts: mt8195: Add Ethernet controller

 arch/arm64/boot/dts/mediatek/mt8195-demo.dts  | 81 +++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      | 86 +++++++++++++++++++
 .../ethernet/stmicro/stmmac/dwmac-mediatek.c  |  7 +-
 3 files changed, 173 insertions(+), 1 deletion(-)

-- 
2.18.0