From: Nava kishore Manne <nava.kishore.manne@amd.com>
To: <michal.simek@xilinx.com>, <mdf@kernel.org>, <hao.wu@intel.com>,
<yilun.xu@intel.com>, <trix@redhat.com>, <ronak.jain@xilinx.com>,
<gregkh@linuxfoundation.org>, <tanmay.shah@xilinx.com>,
<ben.levinsky@amd.com>, <harsha.harsha@xilinx.com>,
<rajan.vaja@xilinx.com>, <nava.kishore.manne@amd.com>,
<mathieu.poirier@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-fpga@vger.kernel.org>
Subject: [PATCH v4 1/2] firmware: xilinx: Add pm api function for PL config reg readback
Date: Fri, 23 Dec 2022 17:28:49 +0530 [thread overview]
Message-ID: <20221223115850.2572573-2-nava.kishore.manne@amd.com> (raw)
In-Reply-To: <20221223115850.2572573-1-nava.kishore.manne@amd.com>
Adds PM API for performing Programmable Logic(PL) configuration
register readback. It provides an interface to the firmware(pmufw)
to readback the FPGA configuration register.
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
---
changes for v2:
- None.
Changes for v3:
- Updated API and config reg read-back handling logic
- Updated the commit msg to align with the changes.
Changes for v4:
- Fix some minor coding issues. No functional changes.
- Updated Return value comments as suggested by Xu Yilun.
drivers/firmware/xilinx/zynqmp.c | 33 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 10 +++++++++
2 files changed, 43 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index ff5cabe70a2b..ca954e1119b5 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -941,6 +941,39 @@ int zynqmp_pm_fpga_get_status(u32 *value)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
+/**
+ * zynqmp_pm_fpga_get_config_status - Get the FPGA configuration status.
+ * @value: Buffer to store FPGA configuration status.
+ *
+ * This function provides access to the pmufw to get the FPGA configuration
+ * status
+ *
+ * Return: 0 on success, a negative value on error
+ */
+int zynqmp_pm_fpga_get_config_status(u32 *value)
+{
+ u32 buf, phys_lower_addr, phys_upper_addr;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ phys_lower_addr = lower_32_bits((u64)&buf);
+ phys_upper_addr = upper_32_bits((u64)&buf);
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_READ,
+ XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET,
+ phys_lower_addr, phys_upper_addr,
+ XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG,
+ ret_payload);
+
+ *value = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_config_status);
+
/**
* zynqmp_pm_pinctrl_request - Request Pin from firmware
* @pin: Pin number to request
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 76d2b3ebad84..29e8964f4297 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -70,6 +70,10 @@
#define XILINX_ZYNQMP_PM_FPGA_FULL 0x0U
#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0)
+/* FPGA Status Reg */
+#define XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET 7U
+#define XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG 0U
+
/*
* Node IDs for the Error Events.
*/
@@ -117,6 +121,7 @@ enum pm_api_id {
PM_CLOCK_GETRATE = 42,
PM_CLOCK_SETPARENT = 43,
PM_CLOCK_GETPARENT = 44,
+ PM_FPGA_READ = 46,
PM_SECURE_AES = 47,
PM_FEATURE_CHECK = 63,
};
@@ -505,6 +510,7 @@ int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset);
int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value);
int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config,
u32 value);
+int zynqmp_pm_fpga_get_config_status(u32 *value);
#else
static inline int zynqmp_pm_get_api_version(u32 *version)
{
@@ -790,6 +796,10 @@ static inline int zynqmp_pm_set_gem_config(u32 node,
return -ENODEV;
}
+static inline int zynqmp_pm_fpga_get_config_status(u32 *value)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.25.1
next prev parent reply other threads:[~2022-12-23 11:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-23 11:58 [PATCH v4 0/2]Adds status interface for zynqmp-fpga Nava kishore Manne
2022-12-23 11:58 ` Nava kishore Manne [this message]
2022-12-26 5:56 ` [PATCH v4 1/2] firmware: xilinx: Add pm api function for PL config reg readback Xu Yilun
2022-12-23 11:58 ` [PATCH v4 2/2] fpga: zynqmp-fpga: Adds status interface Nava kishore Manne
2022-12-26 6:08 ` Xu Yilun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221223115850.2572573-2-nava.kishore.manne@amd.com \
--to=nava.kishore.manne@amd.com \
--cc=ben.levinsky@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=hao.wu@intel.com \
--cc=harsha.harsha@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mdf@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=ronak.jain@xilinx.com \
--cc=tanmay.shah@xilinx.com \
--cc=trix@redhat.com \
--cc=yilun.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®