Greeting, FYI, we noticed BUG:unable_to_handle_page_fault_for_address due to commit (built with gcc-11): commit: f5c1bb2afe93396d41c5cbdcb909b08a75b8dde4 ("x86/calldepth: Add ret/call counting for debug") https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git master [test failed on linux-next/master e45fb347b630ee76482fe938ba76cf8eab811290] in testcase: boot on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace): +---------------------------------------------+------------+------------+ | | bbaceb189a | f5c1bb2afe | +---------------------------------------------+------------+------------+ | boot_successes | 18 | 0 | | boot_failures | 0 | 18 | | BUG:unable_to_handle_page_fault_for_address | 0 | 18 | | Oops:#[##] | 0 | 18 | | RIP:__switch_to_asm | 0 | 18 | | Kernel_panic-not_syncing:Fatal_exception | 0 | 18 | +---------------------------------------------+------------+------------+ If you fix the issue, kindly add following tag | Reported-by: kernel test robot | Link: https://lore.kernel.org/oe-lkp/202212251742.82e3d9cb-oliver.sang@intel.com [ 0.550171][ T0] BUG: unable to handle page fault for address: ffffffff06531208 [ 0.551211][ T0] #PF: supervisor write access in kernel mode [ 0.551990][ T0] #PF: error_code(0x0002) - not-present page [ 0.552740][ T0] PGD 3228067 P4D 3228067 PUD 0 [ 0.553361][ T0] Oops: 0002 [#1] [ 0.553809][ T0] CPU: 0 PID: 0 Comm: swapper Tainted: G T 6.1.0-rc1-00051-gf5c1bb2afe93 #1 589e92d2cdaf7cef9f58e91ccf48515357fc867a [ 0.555479][ T0] RIP: 0010:__switch_to_asm (arch/x86/entry/entry_64.S:265) [ 0.556144][ T0] Code: c7 c4 10 00 00 00 e8 01 00 00 00 cc e8 01 00 00 00 cc 48 83 c4 10 49 ff cc 75 eb 0f ae e8 48 c7 04 25 10 4e ed 83 ff ff ff ff <65> 48 ff 04 25 08 72 2a 83 41 5f 41 5e 41 5d 41 5c 5b 5d e9 45 ad All code ======== 0: c7 c4 10 00 00 00 mov $0x10,%esp 6: e8 01 00 00 00 callq 0xc b: cc int3 c: e8 01 00 00 00 callq 0x12 11: cc int3 12: 48 83 c4 10 add $0x10,%rsp 16: 49 ff cc dec %r12 19: 75 eb jne 0x6 1b: 0f ae e8 lfence 1e: 48 c7 04 25 10 4e ed movq $0xffffffffffffffff,0xffffffff83ed4e10 25: 83 ff ff ff ff 2a:* 65 48 ff 04 25 08 72 incq %gs:0xffffffff832a7208 <-- trapping instruction 31: 2a 83 33: 41 5f pop %r15 35: 41 5e pop %r14 37: 41 5d pop %r13 39: 41 5c pop %r12 3b: 5b pop %rbx 3c: 5d pop %rbp 3d: e9 .byte 0xe9 3e: 45 ad rex.RB lods %ds:(%rsi),%eax Code starting with the faulting instruction =========================================== 0: 65 48 ff 04 25 08 72 incq %gs:0xffffffff832a7208 7: 2a 83 9: 41 5f pop %r15 b: 41 5e pop %r14 d: 41 5d pop %r13 f: 41 5c pop %r12 11: 5b pop %rbx 12: 5d pop %rbp 13: e9 .byte 0xe9 14: 45 ad rex.RB lods %ds:(%rsi),%eax [ 0.556467][ T0] RSP: 0000:ffff888100277f20 EFLAGS: 00010046 [ 0.556467][ T0] RAX: 0000000000000000 RBX: ffffffff83231a00 RCX: 0000000000000000 [ 0.556467][ T0] RDX: 0000000000000000 RSI: ffff888100270000 RDI: ffffffff83231500 [ 0.556467][ T0] RBP: ffffffff83203e88 R08: 0000000000000000 R09: 0000000000000000 [ 0.556467][ T0] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 0.556467][ T0] R13: ffff888100270000 R14: 0000000000000000 R15: 0000000000000000 [ 0.556467][ T0] FS: 0000000000000000(0000) GS:ffffffff8328a000(0000) knlGS:0000000000000000 [ 0.556467][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.556467][ T0] CR2: ffffffff06531208 CR3: 0000000003227000 CR4: 00000000000406b0 [ 0.556467][ T0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.556467][ T0] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.556467][ T0] Call Trace: [ 0.556467][ T0] Modules linked in: [ 0.556467][ T0] CR2: ffffffff06531208 [ 0.556467][ T0] ---[ end trace 0000000000000000 ]--- [ 0.556467][ T0] RIP: 0010:__switch_to_asm (arch/x86/entry/entry_64.S:265) [ 0.556467][ T0] Code: c7 c4 10 00 00 00 e8 01 00 00 00 cc e8 01 00 00 00 cc 48 83 c4 10 49 ff cc 75 eb 0f ae e8 48 c7 04 25 10 4e ed 83 ff ff ff ff <65> 48 ff 04 25 08 72 2a 83 41 5f 41 5e 41 5d 41 5c 5b 5d e9 45 ad All code ======== 0: c7 c4 10 00 00 00 mov $0x10,%esp 6: e8 01 00 00 00 callq 0xc b: cc int3 c: e8 01 00 00 00 callq 0x12 11: cc int3 12: 48 83 c4 10 add $0x10,%rsp 16: 49 ff cc dec %r12 19: 75 eb jne 0x6 1b: 0f ae e8 lfence 1e: 48 c7 04 25 10 4e ed movq $0xffffffffffffffff,0xffffffff83ed4e10 25: 83 ff ff ff ff 2a:* 65 48 ff 04 25 08 72 incq %gs:0xffffffff832a7208 <-- trapping instruction 31: 2a 83 33: 41 5f pop %r15 35: 41 5e pop %r14 37: 41 5d pop %r13 39: 41 5c pop %r12 3b: 5b pop %rbx 3c: 5d pop %rbp 3d: e9 .byte 0xe9 3e: 45 ad rex.RB lods %ds:(%rsi),%eax Code starting with the faulting instruction =========================================== 0: 65 48 ff 04 25 08 72 incq %gs:0xffffffff832a7208 7: 2a 83 9: 41 5f pop %r15 b: 41 5e pop %r14 d: 41 5d pop %r13 f: 41 5c pop %r12 11: 5b pop %rbx 12: 5d pop %rbp 13: e9 .byte 0xe9 14: 45 ad rex.RB lods %ds:(%rsi),%eax To reproduce: # build kernel cd linux cp config-6.1.0-rc1-00051-gf5c1bb2afe93 .config make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH= modules_install cd find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz git clone https://github.com/intel/lkp-tests.git cd lkp-tests bin/lkp qemu -k -m modules.cgz job-script # job-script is attached in this email # if come across any failure that blocks the test, # please remove ~/.lkp and /lkp dir to run from a clean state. -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests