Re: [PATCH] watchdog: loongson1: Use devm_clk_get_enabled() helper

[Guenter Roeck <linux@roeck-us.net>]

On Sat, Dec 31, 2022 at 12:14:30PM +0100, Christophe JAILLET wrote:
> The devm_clk_get_enabled() helper:
>    - calls devm_clk_get()
>    - calls clk_prepare_enable() and registers what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the need of a dedicated function used
> with devm_add_action_or_reset().
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
> Note that I get a compilation error because <loongson1.h> is not found on
> my system (x86_64).
> So I think that a "depends on LOONG<something>" in missing in a KConfig
> file.
> 
> Fixing it could help compilation farms build-bots.

Why would

	depends on MACH_LOONGSON32

be insufficient ?

Not reviewing the series further until this is resolved. It looks like
I am missing something serious.

Guenter

> ---
>  drivers/watchdog/loongson1_wdt.c | 17 +----------------
>  1 file changed, 1 insertion(+), 16 deletions(-)
> 
> diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
> index bb3d075c0633..c55656cfb403 100644
> --- a/drivers/watchdog/loongson1_wdt.c
> +++ b/drivers/watchdog/loongson1_wdt.c
> @@ -79,11 +79,6 @@ static const struct watchdog_ops ls1x_wdt_ops = {
>  	.set_timeout = ls1x_wdt_set_timeout,
>  };
>  
> -static void ls1x_clk_disable_unprepare(void *data)
> -{
> -	clk_disable_unprepare(data);
> -}
> -
>  static int ls1x_wdt_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -100,20 +95,10 @@ static int ls1x_wdt_probe(struct platform_device *pdev)
>  	if (IS_ERR(drvdata->base))
>  		return PTR_ERR(drvdata->base);
>  
> -	drvdata->clk = devm_clk_get(dev, pdev->name);
> +	drvdata->clk = devm_clk_get_enabled(dev, pdev->name);
>  	if (IS_ERR(drvdata->clk))
>  		return PTR_ERR(drvdata->clk);
>  
> -	err = clk_prepare_enable(drvdata->clk);
> -	if (err) {
> -		dev_err(dev, "clk enable failed\n");
> -		return err;
> -	}
> -	err = devm_add_action_or_reset(dev, ls1x_clk_disable_unprepare,
> -				       drvdata->clk);
> -	if (err)
> -		return err;
> -
>  	clk_rate = clk_get_rate(drvdata->clk);
>  	if (!clk_rate)
>  		return -EINVAL;
> -- 
> 2.34.1
>