Re: [PATCH] watchdog: realtek_otto: Use devm_clk_get_enabled() helper

[Guenter Roeck <linux@roeck-us.net>]

On Sat, Dec 31, 2022 at 04:02:17PM +0100, Christophe JAILLET wrote:
> The devm_clk_get_enabled() helper:
>    - calls devm_clk_get()
>    - calls clk_prepare_enable() and registers what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids the need of a dedicated function used
> with devm_add_action_or_reset().
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/realtek_otto_wdt.c | 17 ++---------------
>  1 file changed, 2 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/watchdog/realtek_otto_wdt.c b/drivers/watchdog/realtek_otto_wdt.c
> index 2a5298c5e8e4..2c30ddd574c5 100644
> --- a/drivers/watchdog/realtek_otto_wdt.c
> +++ b/drivers/watchdog/realtek_otto_wdt.c
> @@ -235,27 +235,14 @@ static const struct watchdog_info otto_wdt_info = {
>  		WDIOF_PRETIMEOUT,
>  };
>  
> -static void otto_wdt_clock_action(void *data)
> -{
> -	clk_disable_unprepare(data);
> -}
> -
>  static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl)
>  {
> -	struct clk *clk = devm_clk_get(ctrl->dev, NULL);
> -	int ret;
> +	struct clk *clk;
>  
> +	clk = devm_clk_get_enabled(ctrl->dev, NULL);
>  	if (IS_ERR(clk))
>  		return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n");
>  
> -	ret = clk_prepare_enable(clk);
> -	if (ret)
> -		return dev_err_probe(ctrl->dev, ret, "Failed to enable clock\n");
> -
> -	ret = devm_add_action_or_reset(ctrl->dev, otto_wdt_clock_action, clk);
> -	if (ret)
> -		return ret;
> -
>  	ctrl->clk_rate_khz = clk_get_rate(clk) / 1000;
>  	if (ctrl->clk_rate_khz == 0)
>  		return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n");
> -- 
> 2.34.1
>