From: Mario Limonciello <mario.limonciello@amd.com>
To: Alex Deucher <alexander.deucher@amd.com>, <linux-kernel@vger.kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>,
Carlos Soriano Sanchez <csoriano@redhat.com>,
<amd-gfx@lists.freedesktop.org>,
<dri-devel@lists.freedesktop.org>,
David Airlie <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>, <christian.koenig@amd.com>,
Lazar Lijo <Lijo.Lazar@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
"Lijo Lazar" <lijo.lazar@amd.com>,
"Pan, Xinhui" <Xinhui.Pan@amd.com>,
David Airlie <airlied@linux.ie>
Subject: [PATCH v7 17/45] drm/amd: Load GFX10 microcode during early_init
Date: Thu, 5 Jan 2023 11:01:03 -0600 [thread overview]
Message-ID: <20230105170138.717-18-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230105170138.717-1-mario.limonciello@amd.com>
Simplifies the code so that GFX10 will get the firmware
name from `amdgpu_ucode_ip_version_decode` and then use this filename
to load microcode as part of the early_init process.
Any failures will cause the driver to fail to probe before the firmware
framebuffer has been removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 84 ++++++--------------------
1 file changed, 18 insertions(+), 66 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 140bb18ff768..6983acc456b2 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3968,9 +3968,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
{
- const char *chip_name;
char fw_name[40];
- char *wks = "";
+ char ucode_prefix[30];
+ const char *wks = "";
int err;
const struct rlc_firmware_header_v2_0 *rlc_hdr;
uint16_t version_major;
@@ -3978,71 +3978,31 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
DRM_DEBUG("\n");
- switch (adev->ip_versions[GC_HWIP][0]) {
- case IP_VERSION(10, 1, 10):
- chip_name = "navi10";
- break;
- case IP_VERSION(10, 1, 1):
- chip_name = "navi14";
- if (!(adev->pdev->device == 0x7340 &&
- adev->pdev->revision != 0x00))
- wks = "_wks";
- break;
- case IP_VERSION(10, 1, 2):
- chip_name = "navi12";
- break;
- case IP_VERSION(10, 3, 0):
- chip_name = "sienna_cichlid";
- break;
- case IP_VERSION(10, 3, 2):
- chip_name = "navy_flounder";
- break;
- case IP_VERSION(10, 3, 1):
- chip_name = "vangogh";
- break;
- case IP_VERSION(10, 3, 4):
- chip_name = "dimgrey_cavefish";
- break;
- case IP_VERSION(10, 3, 5):
- chip_name = "beige_goby";
- break;
- case IP_VERSION(10, 3, 3):
- chip_name = "yellow_carp";
- break;
- case IP_VERSION(10, 3, 6):
- chip_name = "gc_10_3_6";
- break;
- case IP_VERSION(10, 1, 3):
- case IP_VERSION(10, 1, 4):
- chip_name = "cyan_skillfish2";
- break;
- case IP_VERSION(10, 3, 7):
- chip_name = "gc_10_3_7";
- break;
- default:
- BUG();
- }
+ if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 1, 1) &&
+ (!(adev->pdev->device == 0x7340 && adev->pdev->revision != 0x00)))
+ wks = "_wks";
+ amdgpu_ucode_ip_version_decode(adev, GC_HWIP, ucode_prefix, sizeof(ucode_prefix));
- snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", chip_name, wks);
+ snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
err = amdgpu_ucode_request(adev, &adev->gfx.pfp_fw, fw_name);
if (err)
goto out;
amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_PFP);
- snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", chip_name, wks);
+ snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
err = amdgpu_ucode_request(adev, &adev->gfx.me_fw, fw_name);
if (err)
goto out;
amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_ME);
- snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", chip_name, wks);
+ snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
err = amdgpu_ucode_request(adev, &adev->gfx.ce_fw, fw_name);
if (err)
goto out;
amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_CE);
if (!amdgpu_sriov_vf(adev)) {
- snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
+ snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
err = amdgpu_ucode_request(adev, &adev->gfx.rlc_fw, fw_name);
/* don't check this. There are apparently firmwares in the wild with
* incorrect size in the header
@@ -4051,7 +4011,7 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
goto out;
if (err)
dev_dbg(adev->dev,
- "gfx10: amdgpu_ucode_validate() failed \"%s\"\n",
+ "gfx10: amdgpu_ucode_request() failed \"%s\"\n",
fw_name);
rlc_hdr = (const struct rlc_firmware_header_v2_0 *)adev->gfx.rlc_fw->data;
version_major = le16_to_cpu(rlc_hdr->header.header_version_major);
@@ -4061,14 +4021,14 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
goto out;
}
- snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", chip_name, wks);
+ snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
err = amdgpu_ucode_request(adev, &adev->gfx.mec_fw, fw_name);
if (err)
goto out;
amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC1);
amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC1_JT);
- snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", chip_name, wks);
+ snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
err = amdgpu_ucode_request(adev, &adev->gfx.mec2_fw, fw_name);
if (!err) {
amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC2);
@@ -4077,6 +4037,8 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
err = 0;
adev->gfx.mec2_fw = NULL;
}
+ amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC2);
+ amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC2_JT);
gfx_v10_0_check_fw_write_wait(adev);
out:
@@ -4239,19 +4201,11 @@ static void gfx_v10_0_mec_fini(struct amdgpu_device *adev)
amdgpu_bo_free_kernel(&adev->gfx.mec.mec_fw_obj, NULL, NULL);
}
-static int gfx_v10_0_me_init(struct amdgpu_device *adev)
+static void gfx_v10_0_me_init(struct amdgpu_device *adev)
{
- int r;
-
bitmap_zero(adev->gfx.me.queue_bitmap, AMDGPU_MAX_GFX_QUEUES);
amdgpu_gfx_graphics_queue_acquire(adev);
-
- r = gfx_v10_0_init_microcode(adev);
- if (r)
- DRM_ERROR("Failed to load gfx firmware!\n");
-
- return r;
}
static int gfx_v10_0_mec_init(struct amdgpu_device *adev)
@@ -4619,9 +4573,7 @@ static int gfx_v10_0_sw_init(void *handle)
adev->gfx.gfx_current_status = AMDGPU_GFX_NORMAL_MODE;
- r = gfx_v10_0_me_init(adev);
- if (r)
- return r;
+ gfx_v10_0_me_init(adev);
if (adev->gfx.rlc.funcs) {
if (adev->gfx.rlc.funcs->init) {
@@ -7599,7 +7551,7 @@ static int gfx_v10_0_early_init(void *handle)
/* init rlcg reg access ctrl */
gfx_v10_0_init_rlcg_reg_access_ctrl(adev);
- return 0;
+ return gfx_v10_0_init_microcode(adev);
}
static int gfx_v10_0_late_init(void *handle)
--
2.34.1
next prev parent reply other threads:[~2023-01-05 17:03 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 17:00 [PATCH v7 00/45] Recover from failure to probe GPU Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 01/45] drm/amd: Delay removal of the firmware framebuffer Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 02/45] drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode" Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 03/45] drm/amd: Convert SMUv11 microcode to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 04/45] drm/amd: Convert SMUv13 " Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 05/45] drm/amd: Add a new helper for loading/validating microcode Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 06/45] drm/amd: Use `amdgpu_ucode_request` helper for SDMA Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 07/45] drm/amd: Convert SDMA to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 08/45] drm/amd: Make SDMA firmware load failures less noisy Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 09/45] drm/amd: Use `amdgpu_ucode_*` helpers for VCN Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 10/45] drm/amd: Load VCN microcode during early_init Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 11/45] drm/amd: Load MES " Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 12/45] drm/amd: Use `amdgpu_ucode_*` helpers for MES Mario Limonciello
2023-01-05 17:00 ` [PATCH v7 13/45] drm/amd: Remove superfluous assignment for `adev->mes.adev` Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 14/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX9 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 15/45] drm/amd: Load GFX9 microcode during early_init Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 16/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX10 Mario Limonciello
2023-01-05 17:01 ` Mario Limonciello [this message]
2023-01-05 17:01 ` [PATCH v7 18/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX11 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 19/45] drm/amd: Load GFX11 microcode during early_init Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 20/45] drm/amd: Parse both v1 and v2 TA microcode headers using same function Mario Limonciello
2023-01-06 3:27 ` Lazar, Lijo
2023-01-09 18:52 ` Limonciello, Mario
2023-01-05 17:01 ` [PATCH v7 21/45] drm/amd: Avoid BUG() for case of SRIOV missing IP version Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 22/45] drm/amd: Load PSP microcode during early_init Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 23/45] drm/amd: Use `amdgpu_ucode_*` helpers for PSP Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 24/45] drm/amd/display: Load DMUB microcode during early_init Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 25/45] drm/amd: Use `amdgpu_ucode_release` helper for DMUB Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 26/45] drm/amd: Use `amdgpu_ucode_*` helpers for SMU Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 27/45] drm/amd: Load SMU microcode during early_init Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 28/45] drm/amd: Optimize SRIOV switch/case for PSP microcode load Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 29/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX6 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 30/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX7 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 31/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX8 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 32/45] drm/amd: Use `amdgpu_ucode_*` helpers for GMC6 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 33/45] drm/amd: Use `amdgpu_ucode_*` helpers for GMC7 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 34/45] drm/amd: Use `amdgpu_ucode_*` helpers for GMC8 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 35/45] drm/amd: Use `amdgpu_ucode_*` helpers for SDMA2.4 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 36/45] drm/amd: Use `amdgpu_ucode_*` helpers for SDMA3.0 Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 37/45] drm/amd: Use `amdgpu_ucode_*` helpers for SDMA on CIK Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 38/45] drm/amd: Use `amdgpu_ucode_*` helpers for UVD Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 39/45] drm/amd: Use `amdgpu_ucode_*` helpers for VCE Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 40/45] drm/amd: Use `amdgpu_ucode_*` helpers for CGS Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 41/45] drm/amd: Use `amdgpu_ucode_*` helpers for GPU info bin Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 42/45] drm/amd: Use `amdgpu_ucode_*` helpers for DMCU Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 43/45] drm/amd: Use `amdgpu_ucode_release` helper for powerplay Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 44/45] drm/amd: Use `amdgpu_ucode_release` helper for si Mario Limonciello
2023-01-05 17:01 ` [PATCH v7 45/45] drm/amd: make amdgpu_ucode_validate static Mario Limonciello
2023-01-05 17:35 ` [PATCH v7 00/45] Recover from failure to probe GPU Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230105170138.717-18-mario.limonciello@amd.com \
--to=mario.limonciello@amd.com \
--cc=Lijo.Lazar@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=csoriano@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®