mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Leesoo Ahn <lsahn@ooseel.net>
To: lsahn@ooseel.net
Cc: Oliver Neukum <oneukum@suse.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next v4] usbnet: optimize usbnet_bh() to reduce CPU load
Date: Fri,  6 Jan 2023 19:49:49 +0900	[thread overview]
Message-ID: <20230106104950.22741-1-lsahn@ooseel.net> (raw)

The current source pushes skb into dev-done queue by calling
skb_dequeue_tail() and then pop it by skb_dequeue() to branch to
rx_cleanup state for freeing urb/skb in usbnet_bh(). It takes extra CPU
load, 2.21% (skb_queue_tail) as follows,

-   11.58%     0.26%  swapper          [k] usbnet_bh
   - 11.32% usbnet_bh
      - 6.43% skb_dequeue
           6.34% _raw_spin_unlock_irqrestore
      - 2.21% skb_queue_tail
           2.19% _raw_spin_unlock_irqrestore
      - 1.68% consume_skb
         - 0.97% kfree_skbmem
              0.80% kmem_cache_free
           0.53% skb_release_data

To reduce the extra CPU load use return values to call helper function
usb_free_skb() to free the resources instead of calling skb_queue_tail()
and skb_dequeue() for push and pop respectively.

-    7.87%     0.25%  swapper          [k] usbnet_bh
   - 7.62% usbnet_bh
      - 4.81% skb_dequeue
           4.74% _raw_spin_unlock_irqrestore
      - 1.75% consume_skb
         - 0.98% kfree_skbmem
              0.78% kmem_cache_free
           0.58% skb_release_data
        0.53% smsc95xx_rx_fixup

Signed-off-by: Leesoo Ahn <lsahn@ooseel.net>
---
v4:
  - Use usb_free_skb() helper function instead of goto label

v3:
  - Replace return values with proper -ERR values in rx_process()
  https://lore.kernel.org/netdev/20221221075924.1141346-1-lsahn@ooseel.net/

v2:
  - Replace goto label with return statement to reduce goto entropy
  - Add CPU load information by perf in commit message
  https://lore.kernel.org/netdev/20221221044230.1012787-1-lsahn@ooseel.net/

v1 at:
  https://lore.kernel.org/netdev/20221217161851.829497-1-lsahn@ooseel.net/

---
 drivers/net/usb/usbnet.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index e4fbb4d86606..fc12b5c4241b 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -556,32 +556,30 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 
 /*-------------------------------------------------------------------------*/
 
-static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
+static inline int rx_process(struct usbnet *dev, struct sk_buff *skb)
 {
 	if (dev->driver_info->rx_fixup &&
 	    !dev->driver_info->rx_fixup (dev, skb)) {
 		/* With RX_ASSEMBLE, rx_fixup() must update counters */
 		if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
 			dev->net->stats.rx_errors++;
-		goto done;
+		return -EPROTO;
 	}
 	// else network stack removes extra byte if we forced a short packet
 
 	/* all data was already cloned from skb inside the driver */
 	if (dev->driver_info->flags & FLAG_MULTI_PACKET)
-		goto done;
+		return -EALREADY;
 
 	if (skb->len < ETH_HLEN) {
 		dev->net->stats.rx_errors++;
 		dev->net->stats.rx_length_errors++;
 		netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
-	} else {
-		usbnet_skb_return(dev, skb);
-		return;
+		return -EPROTO;
 	}
 
-done:
-	skb_queue_tail(&dev->done, skb);
+	usbnet_skb_return(dev, skb);
+	return 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1515,6 +1513,14 @@ static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
 	return ret;
 }
 
+static inline void usb_free_skb(struct sk_buff *skb)
+{
+	struct skb_data *entry = (struct skb_data *)skb->cb;
+
+	usb_free_urb(entry->urb);
+	dev_kfree_skb(skb);
+}
+
 /*-------------------------------------------------------------------------*/
 
 // tasklet (work deferred from completions, in_irq) or timer
@@ -1529,15 +1535,14 @@ static void usbnet_bh (struct timer_list *t)
 		entry = (struct skb_data *) skb->cb;
 		switch (entry->state) {
 		case rx_done:
-			entry->state = rx_cleanup;
-			rx_process (dev, skb);
+			if (rx_process(dev, skb))
+				usb_free_skb(skb);
 			continue;
 		case tx_done:
 			kfree(entry->urb->sg);
 			fallthrough;
 		case rx_cleanup:
-			usb_free_urb (entry->urb);
-			dev_kfree_skb (skb);
+			usb_free_skb(skb);
 			continue;
 		default:
 			netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
-- 
2.34.1


             reply	other threads:[~2023-01-06 10:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-06 10:49 Leesoo Ahn [this message]
2023-01-09  7:30 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230106104950.22741-1-lsahn@ooseel.net \
    --to=lsahn@ooseel.net \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=oneukum@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®