From: Javier Martinez Canillas <javierm@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>,
Sam Ravnborg <sam@ravnborg.org>, Daniel Vetter <daniel@ffwll.ch>,
David Airlie <airlied@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
dri-devel@lists.freedesktop.org
Subject: [PATCH v2 05/13] drm/panel-boe-bf060y8m-aj0: Drop custom DSI write macro
Date: Sat, 7 Jan 2023 20:18:14 +0100 [thread overview]
Message-ID: <20230107191822.3787147-6-javierm@redhat.com> (raw)
In-Reply-To: <20230107191822.3787147-1-javierm@redhat.com>
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
Changes in v2:
- Add Sam Ravnborg's Reviewed-by tag.
- Fix identation on macro usage (Sam Ravnborg).
.../gpu/drm/panel/panel-boe-bf060y8m-aj0.c | 42 ++++++++-----------
1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c b/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c
index ad58840eda41..90098b753e3b 100644
--- a/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c
+++ b/drivers/gpu/drm/panel/panel-boe-bf060y8m-aj0.c
@@ -43,14 +43,6 @@ struct boe_bf060y8m_aj0 *to_boe_bf060y8m_aj0(struct drm_panel *panel)
return container_of(panel, struct boe_bf060y8m_aj0, panel);
}
-#define dsi_dcs_write_seq(dsi, seq...) do { \
- static const u8 d[] = { seq }; \
- int ret; \
- ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
- if (ret < 0) \
- return ret; \
- } while (0)
-
static void boe_bf060y8m_aj0_reset(struct boe_bf060y8m_aj0 *boe)
{
gpiod_set_value_cansleep(boe->reset_gpio, 0);
@@ -67,12 +59,12 @@ static int boe_bf060y8m_aj0_on(struct boe_bf060y8m_aj0 *boe)
struct device *dev = &dsi->dev;
int ret;
- dsi_dcs_write_seq(dsi, 0xb0, 0xa5, 0x00);
- dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0x4c);
- dsi_dcs_write_seq(dsi, MIPI_DCS_SET_3D_CONTROL, 0x10);
- dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, DCS_ALLOW_HBM_RANGE);
- dsi_dcs_write_seq(dsi, 0xf8,
- 0x00, 0x08, 0x10, 0x00, 0x22, 0x00, 0x00, 0x2d);
+ mipi_dsi_dcs_write_seq(dsi, 0xb0, 0xa5, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0x4c);
+ mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_3D_CONTROL, 0x10);
+ mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, DCS_ALLOW_HBM_RANGE);
+ mipi_dsi_dcs_write_seq(dsi, 0xf8,
+ 0x00, 0x08, 0x10, 0x00, 0x22, 0x00, 0x00, 0x2d);
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
@@ -81,17 +73,17 @@ static int boe_bf060y8m_aj0_on(struct boe_bf060y8m_aj0 *boe)
}
msleep(30);
- dsi_dcs_write_seq(dsi, 0xb0, 0xa5, 0x00);
- dsi_dcs_write_seq(dsi, 0xc0,
- 0x08, 0x48, 0x65, 0x33, 0x33, 0x33,
- 0x2a, 0x31, 0x39, 0x20, 0x09);
- dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x00, 0x00, 0x1f, 0x1f,
- 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f,
- 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
- dsi_dcs_write_seq(dsi, 0xe2, 0x20, 0x04, 0x10, 0x12, 0x92,
- 0x4f, 0x8f, 0x44, 0x84, 0x83, 0x83, 0x83,
- 0x5c, 0x5c, 0x5c);
- dsi_dcs_write_seq(dsi, 0xde, 0x01, 0x2c, 0x00, 0x77, 0x3e);
+ mipi_dsi_dcs_write_seq(dsi, 0xb0, 0xa5, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0xc0,
+ 0x08, 0x48, 0x65, 0x33, 0x33, 0x33,
+ 0x2a, 0x31, 0x39, 0x20, 0x09);
+ mipi_dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x00, 0x00, 0x1f, 0x1f,
+ 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f,
+ 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
+ mipi_dsi_dcs_write_seq(dsi, 0xe2, 0x20, 0x04, 0x10, 0x12, 0x92,
+ 0x4f, 0x8f, 0x44, 0x84, 0x83, 0x83, 0x83,
+ 0x5c, 0x5c, 0x5c);
+ mipi_dsi_dcs_write_seq(dsi, 0xde, 0x01, 0x2c, 0x00, 0x77, 0x3e);
msleep(30);
--
2.38.1
next prev parent reply other threads:[~2023-01-07 19:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-07 19:18 [PATCH v2 00/13] drm/panel: Make panel drivers use existing DSI write macros Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 01/13] drm/panel-asus-z00t-tm5p5-n35596: Drop custom " Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 02/13] drm/panel-sitronix-st7703: " Javier Martinez Canillas
2023-01-09 16:03 ` Guido Günther
2023-01-07 19:18 ` [PATCH v2 03/13] drm/panel-leadtek-ltk050h3146w: Drop custom DSI write macro Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 04/13] drm/panel-elida-kd35t133: " Javier Martinez Canillas
2023-01-07 19:18 ` Javier Martinez Canillas [this message]
2023-01-07 19:18 ` [PATCH v2 06/13] drm/panel-novatek-nt35950: " Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 07/13] drm/panel-jdi-fhd-r63452: Drop custom DSI write macros Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 08/13] drm/panel-samsung-s6e88a0-ams452ef01: Drop custom DSI write macro Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 09/13] drm/panel-samsung-sofef00: " Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 10/13] drm/panel-sharp-ls060t1sx01: " Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 11/13] drm/panel-mantix-mlaf057we51: " Javier Martinez Canillas
2023-01-09 16:05 ` Guido Günther
2023-01-07 19:18 ` [PATCH v2 12/13] drm/panel-sony-tulip-truly-nt35521: " Javier Martinez Canillas
2023-01-07 19:18 ` [PATCH v2 13/13] drm/panel-xinpeng-xpp055c272: " Javier Martinez Canillas
2023-01-11 18:02 ` [PATCH v2 00/13] drm/panel: Make panel drivers use existing DSI write macros Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230107191822.3787147-6-javierm@redhat.com \
--to=javierm@redhat.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®