mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux 6.2-rc3
Date: Mon, 9 Jan 2023 09:47:42 -0800	[thread overview]
Message-ID: <20230109174742.GA1191249@roeck-us.net> (raw)
In-Reply-To: <CAHk-=wjwrqFcC9-KkfboqATYwLfJHi_8Z5mTrJh=nf8KT_SjUA@mail.gmail.com>

On Sun, Jan 08, 2023 at 12:06:47PM -0600, Linus Torvalds wrote:
> Here we are, another week done, and things are starting to look a lot
> more normal after that very quiet holiday week that made rc2 so very
> small.
> 
> Nothing in particular here stands out: the bulk of this is driver
> fixes (networking, gpu, block, virtio - but also usb, fbdev, rdma etc,
> so a little bit of everything).  That is as should be, and just
> matches where the bulk of the code is.
> 
> Outside of the various driver fixes, we've got core networking, some
> filesystem fixes (btrfs, cifs, f2fs and nfs), and some perf tooling
> work.
> 
> With the rest being mostly selftests and documentation.
> 
> The shortlog is below, plase do give it a good test, and holler if you
> find anything.
> 

Build results:
	total: 155 pass: 151 fail: 4
Failed builds:
	powerpc:allmodconfig
	sh:defconfig
	sh:shx3_defconfig
	xtensa:allmodconfig
Qemu test results:
	total: 500 pass: 500 fail: 0

No change with compile tests (included again below for reference).
The good news is that the runtime/boot tests now all pass.

Guenter

---
Build errors
============

Building powerpc:allmodconfig ... failed
--------------
Error log:
In file included from include/linux/string.h:253,
                 from arch/powerpc/include/asm/paca.h:16,
                 from arch/powerpc/include/asm/current.h:13,
                 from include/linux/thread_info.h:23,
                 from include/asm-generic/preempt.h:5,
                 from ./arch/powerpc/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:78,
                 from include/linux/spinlock.h:56,
                 from include/linux/wait.h:9,
                 from include/linux/wait_bit.h:8,
                 from include/linux/fs.h:6,
                 from fs/f2fs/inline.c:9:
fs/f2fs/inline.c: In function 'f2fs_move_inline_dirents':
include/linux/fortify-string.h:59:33: error: '__builtin_memset' pointer overflow between offset [28, 898293814] and size [-898293787, -1] [-Werror=array-bounds]
   59 | #define __underlying_memset     __builtin_memset
      |                                 ^
include/linux/fortify-string.h:337:9: note: in expansion of macro '__underlying_memset'
  337 |         __underlying_memset(p, c, __fortify_size);                      \
      |         ^~~~~~~~~~~~~~~~~~~
include/linux/fortify-string.h:345:25: note: in expansion of macro '__fortify_memset_chk'
  345 | #define memset(p, c, s) __fortify_memset_chk(p, c, s,                   \
      |                         ^~~~~~~~~~~~~~~~~~~~
fs/f2fs/inline.c:430:9: note: in expansion of macro 'memset'
  430 |         memset(dst.bitmap + src.nr_bitmap, 0, dst.nr_bitmap - src.nr_bitmap);
      |         ^~~~~~
cc1: all warnings being treated as errors

xtensa:allmodconfig

Building xtensa:allmodconfig ... failed
--------------
Error log:
kernel/kcsan/kcsan_test.c: In function '__report_matches':
kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes is larger than 1536 bytes

Bisect for both points to commit e240e53ae0abb08 ("mm, slub: add
CONFIG_SLUB_TINY").  Reverting it on its own is not possible, but
reverting the following two patches fixes the problem.

149b6fa228ed mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
e240e53ae0ab mm, slub: add CONFIG_SLUB_TINY

Context: CONFIG_SLUB_TINY is enabled with allmodconfig builds.
This enables some previously disabled configurations and disables
some previously enabled configurations.

---
sh:defconfig
sh:shx3_defconfig

Building sh:defconfig ... failed
--------------
Error log:
In file included from <command-line>:
In function 'follow_pmd_mask',
    inlined from 'follow_pud_mask' at mm/gup.c:735:9,
    inlined from 'follow_p4d_mask' at mm/gup.c:752:9,
    inlined from 'follow_page_mask' at mm/gup.c:809:9:
include/linux/compiler_types.h:358:45: error: call to '__compiletime_assert_263' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
  358 |         _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

Bisect points to commit 0862ff059c9e ("sh/mm: Make pmd_t similar to pte_t").
This commit introduces

-typedef struct { unsigned long long pmd; } pmd_t;
+typedef struct {
+       struct {
+               unsigned long pmd_low;
+               unsigned long pmd_high;
+       };
+       unsigned long long pmd;
+} pmd_t;

That should probably be "typedef union", not "typedef struct".

  parent reply	other threads:[~2023-01-09 17:52 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-08 18:06 Linus Torvalds
2023-01-09  9:01 ` Build regressions/improvements in v6.2-rc3-8-g1fe4fd6f5cad346e Geert Uytterhoeven
2023-01-09 17:47 ` Guenter Roeck [this message]
2023-01-09 22:18   ` Linux 6.2-rc3 Linus Torvalds
2023-01-09 22:29     ` Marco Elver
2023-01-09 22:34       ` Linus Torvalds
2023-01-09 22:43     ` Vlastimil Babka
2023-01-09 23:14       ` Linus Torvalds
2023-01-09 23:32         ` Guenter Roeck
2023-01-09 23:14     ` Guenter Roeck
2023-01-10 10:44     ` Peter Zijlstra
2023-01-10 11:32       ` Linus Torvalds

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230109174742.GA1191249@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®