mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marcel Ziswiler <marcel@ziswiler.com>
To: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Denys Drozdov <denys.drozdov@toradex.com>,
	Fabio Estevam <festevam@denx.de>,
	Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Li Yang <leoyang.li@nxp.com>, Marek Vasut <marex@denx.de>,
	Matthias Schiffer <matthias.schiffer@tq-group.com>,
	Max Krummenacher <max.krummenacher@toradex.com>,
	Peng Fan <peng.fan@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Reinhold Mueller <reinhold.mueller@emtrion.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH v3 0/6] arm64: dts: freescale: prepare and add apalis imx8 support
Date: Wed, 11 Jan 2023 12:05:51 +0100	[thread overview]
Message-ID: <20230111110558.349460-1-marcel@ziswiler.com> (raw)

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


Add support for lsio_pwm0-3, add io-channel-cells property for ADC
nodes, set lpspi0 max frequency to 60MHz, add toradex,apalis-imx8 et al.
to dt-bindings and finally, add initial support for Apalis iMX8 split
into module and carrier board parts.

Changes in v3:
- Fix subject as pointed out by Shawn. Thanks!
- Properly accommodate for -v1.1 modules curtsey Francesco.
- Only use V1.1 compatible for V1.1 module dtsi.
- Split patch into separate module and carrier boards parts as suggested
  by Shawn.
- Put reg after compatible as requested by Shawn.
- Move atmel_mxt_ts and rtc_i2c into module dtsi to save such
  duplications as suggested by Shawn.
- Change iomuxc pinctrl indent style as suggested by Shawn.
- Change led node names to the preferred first form as suggested by
  Shawn. While at it also add color (yikes), default-state and function
  properties and remove the deprecated label property.
- Put enable-active-high properties after the gpio ones as suggested by
  Shawn. Thanks!
- Remove adc node's vref-supply and accompanying reg_vref_1v8 regulator
  node.
- Rename gpio-hogs adherring to dt schema naming convention.

Changes in v2:
- Fixed missing space in the comment V1.1Module curtsey Max.
- Added Rob's ack.

Marcel Ziswiler (3):
  dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
  arm64: dts: freescale: add initial apalis imx8 aka quadmax module
    support
  arm64: dts: freescale: add initial apalis imx8 aka quadmax carrier
    board support

Max Krummenacher (1):
  arm64: dts: imx8-ss-dma: add io-channel-cells to adc nodes

Philippe Schenker (2):
  arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3
  arm64: dts: freescale: imx8-ss-dma: set lpspi0 max frequency to 60mhz

 .../devicetree/bindings/arm/fsl.yaml          |   19 +
 arch/arm64/boot/dts/freescale/Makefile        |    5 +
 .../boot/dts/freescale/imx8-apalis-eval.dtsi  |  134 ++
 .../dts/freescale/imx8-apalis-ixora-v1.1.dtsi |  210 +++
 .../dts/freescale/imx8-apalis-ixora-v1.2.dtsi |  258 +++
 .../boot/dts/freescale/imx8-apalis-v1.1.dtsi  | 1439 +++++++++++++++++
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi |    4 +-
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      |   48 +
 .../boot/dts/freescale/imx8qm-apalis-eval.dts |   16 +
 .../freescale/imx8qm-apalis-ixora-v1.1.dts    |   16 +
 .../dts/freescale/imx8qm-apalis-v1.1-eval.dts |   16 +
 .../imx8qm-apalis-v1.1-ixora-v1.1.dts         |   16 +
 .../imx8qm-apalis-v1.1-ixora-v1.2.dts         |   16 +
 .../dts/freescale/imx8qm-apalis-v1.1.dtsi     |   16 +
 .../boot/dts/freescale/imx8qm-apalis.dtsi     |  340 ++++
 15 files changed, 2552 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi

-- 
2.35.1


             reply	other threads:[~2023-01-11 11:08 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-11 11:05 Marcel Ziswiler [this message]
2023-01-11 11:05 ` [PATCH v3 1/6] arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3 Marcel Ziswiler
2023-01-11 11:05 ` [PATCH v3 2/6] arm64: dts: imx8-ss-dma: add io-channel-cells to adc nodes Marcel Ziswiler
2023-01-11 11:05 ` [PATCH v3 3/6] arm64: dts: freescale: imx8-ss-dma: set lpspi0 max frequency to 60mhz Marcel Ziswiler
2023-01-11 11:05 ` [PATCH v3 4/6] dt-bindings: arm: fsl: add toradex,apalis-imx8 et al Marcel Ziswiler
2023-01-11 11:05 ` [PATCH v3 5/6] arm64: dts: freescale: add initial apalis imx8 aka quadmax module support Marcel Ziswiler
2023-01-11 11:05 ` [PATCH v3 6/6] arm64: dts: freescale: add initial apalis imx8 aka quadmax carrier board support Marcel Ziswiler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230111110558.349460-1-marcel@ziswiler.com \
    --to=marcel@ziswiler.com \
    --cc=Frank.Li@nxp.com \
    --cc=denys.drozdov@toradex.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@denx.de \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=marex@denx.de \
    --cc=matthias.schiffer@tq-group.com \
    --cc=max.krummenacher@toradex.com \
    --cc=peng.fan@nxp.com \
    --cc=philippe.schenker@toradex.com \
    --cc=reinhold.mueller@emtrion.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®