From: Randy Dunlap <rdunlap@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-hwmon@vger.kernel.org
Subject: [PATCH] hwmon: (sht15,sht21) fix kernel-doc warnings
Date: Thu, 12 Jan 2023 22:45:56 -0800 [thread overview]
Message-ID: <20230113064556.21685-1-rdunlap@infradead.org> (raw)
Use the correct function names in kernel-doc comments to prevent these
warnings:
drivers/hwmon/sht15.c:682: warning: expecting prototype for sht15_show_status(). Prototype was for sht15_status_show() instead
drivers/hwmon/sht15.c:705: warning: expecting prototype for sht15_store_heater(). Prototype was for sht15_status_store() instead
drivers/hwmon/sht15.c:738: warning: expecting prototype for sht15_show_temp(). Prototype was for sht15_temp_show() instead
drivers/hwmon/sht15.c:760: warning: expecting prototype for sht15_show_humidity(). Prototype was for sht15_humidity_show() instead
drivers/hwmon/sht21.c:128: warning: expecting prototype for sht21_show_temperature(). Prototype was for sht21_temperature_show() instead
drivers/hwmon/sht21.c:149: warning: expecting prototype for sht21_show_humidity(). Prototype was for sht21_humidity_show() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
---
drivers/hwmon/sht15.c | 8 ++++----
drivers/hwmon/sht21.c | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff -- a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -668,7 +668,7 @@ static inline int sht15_calc_humid(struc
}
/**
- * sht15_show_status() - show status information in sysfs
+ * sht15_status_show() - show status information in sysfs
* @dev: device.
* @attr: device attribute.
* @buf: sysfs buffer where information is written to.
@@ -690,7 +690,7 @@ static ssize_t sht15_status_show(struct
}
/**
- * sht15_store_heater() - change heater state via sysfs
+ * sht15_status_store() - change heater state via sysfs
* @dev: device.
* @attr: device attribute.
* @buf: sysfs buffer to read the new heater state from.
@@ -725,7 +725,7 @@ static ssize_t sht15_status_store(struct
}
/**
- * sht15_show_temp() - show temperature measurement value in sysfs
+ * sht15_temp_show() - show temperature measurement value in sysfs
* @dev: device.
* @attr: device attribute.
* @buf: sysfs buffer where measurement values are written to.
@@ -747,7 +747,7 @@ static ssize_t sht15_temp_show(struct de
}
/**
- * sht15_show_humidity() - show humidity measurement value in sysfs
+ * sht15_humidity_show() - show humidity measurement value in sysfs
* @dev: device.
* @attr: device attribute.
* @buf: sysfs buffer where measurement values are written to.
diff -- a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -114,7 +114,7 @@ out:
}
/**
- * sht21_show_temperature() - show temperature measurement value in sysfs
+ * sht21_temperature_show() - show temperature measurement value in sysfs
* @dev: device
* @attr: device attribute
* @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
@@ -136,7 +136,7 @@ static ssize_t sht21_temperature_show(st
}
/**
- * sht21_show_humidity() - show humidity measurement value in sysfs
+ * sht21_humidity_show() - show humidity measurement value in sysfs
* @dev: device
* @attr: device attribute
* @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
next reply other threads:[~2023-01-13 7:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-13 6:45 Randy Dunlap [this message]
2023-01-15 16:03 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230113064556.21685-1-rdunlap@infradead.org \
--to=rdunlap@infradead.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®