From: nick.hawkins@hpe.com
To: soc@kernel.org
Cc: arnd@arndb.de, linux@roeck-us.net, verdun@hpe.com,
nick.hawkins@hpe.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, linux@armlinux.org.uk,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/2] ARM: dts: add GXP Support for fans and SPI
Date: Fri, 13 Jan 2023 10:06:50 -0600 [thread overview]
Message-ID: <20230113160651.51201-2-nick.hawkins@hpe.com> (raw)
In-Reply-To: <20230113160651.51201-1-nick.hawkins@hpe.com>
From: Nick Hawkins <nick.hawkins@hpe.com>
Reorganize the base address of AHB to accommodate the SPI and fan driver
register requirements. Add the hpe,gxp-spifi and hpe,gxp-fan-ctrl
compatibles. Add comments to make the register range more clear.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
v5:
*Fix ranges
*Remove comments
v4:
*No change
v3:
*No change
v2:
*Changed fn2reg to fn2
*Changed plreg to pl
*Changed fanctrl to fan-controller
*Adjusted base register range to elminate need for defines in code
---
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 +++++++++++++++++++++
arch/arm/boot/dts/hpe-gxp.dtsi | 64 +++++++++++++++++-------
2 files changed, 103 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
index 3a7382ce40ef..d49dcef95c5c 100644
--- a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -24,3 +24,61 @@
reg = <0x40000000 0x20000000>;
};
};
+
+&spifi {
+ status = "okay";
+ flash@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ label = "u-boot";
+ reg = <0x0 0x60000>;
+ };
+
+ u-boot-env@60000 {
+ label = "u-boot-env";
+ reg = <0x60000 0x20000>;
+ };
+
+ kernel@80000 {
+ label = "kernel";
+ reg = <0x80000 0x4c0000>;
+ };
+
+ rofs@540000 {
+ label = "rofs";
+ reg = <0x540000 0x1740000>;
+ };
+
+ rwfs@1c80000 {
+ label = "rwfs";
+ reg = <0x1c80000 0x250000>;
+ };
+
+ section@1ed0000{
+ label = "section";
+ reg = <0x1ed0000 0x130000>;
+ };
+ };
+ };
+ flash@1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ host-prime@0 {
+ label = "host-prime";
+ reg = <0x0 0x02000000>;
+ };
+
+ host-second@2000000 {
+ label = "host-second";
+ reg = <0x02000000 0x02000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
index cf735b3c4f35..4d195d466087 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree file for HPE GXP
+ * Device Tree for HPE
*/
/dts-v1/;
@@ -52,76 +52,102 @@
cache-level = <2>;
};
- ahb@c0000000 {
+ ahb@80000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xc0000000 0x30000000>;
+ ranges = <0x0 0x80000000 0xf000000>,
+ <0x40000000 0xc0000000 0x40000000>;
dma-ranges;
- vic0: interrupt-controller@eff0000 {
+ spifi: spi@40000200 {
+ compatible = "hpe,gxp-spifi";
+ reg = <0x40000200 0x80>, <0x4000c000 0x100>, <0x78000000 0x7ff0000>;
+ interrupts = <20>;
+ interrupt-parent = <&vic0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ };
+
+ flash@1 {
+ reg = <1>;
+ compatible = "jedec,spi-nor";
+ };
+ };
+
+ vic0: interrupt-controller@4eff0000 {
compatible = "arm,pl192-vic";
- reg = <0xeff0000 0x1000>;
+ reg = <0x4eff0000 0x1000>;
interrupt-controller;
#interrupt-cells = <1>;
};
- vic1: interrupt-controller@80f00000 {
+ vic1: interrupt-controller@f00000 {
compatible = "arm,pl192-vic";
- reg = <0x80f00000 0x1000>;
+ reg = <0xf00000 0x1000>;
interrupt-controller;
#interrupt-cells = <1>;
};
- uarta: serial@e0 {
+ uarta: serial@400000e0 {
compatible = "ns16550a";
- reg = <0xe0 0x8>;
+ reg = <0x400000e0 0x8>;
interrupts = <17>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
- uartb: serial@e8 {
+ uartb: serial@400000e8 {
compatible = "ns16550a";
- reg = <0xe8 0x8>;
+ reg = <0x400000e8 0x8>;
interrupts = <18>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
- uartc: serial@f0 {
+ uartc: serial@400000f0 {
compatible = "ns16550a";
- reg = <0xf0 0x8>;
+ reg = <0x400000f0 0x8>;
interrupts = <19>;
interrupt-parent = <&vic0>;
clock-frequency = <1846153>;
reg-shift = <0>;
};
- usb0: usb@efe0000 {
+ usb0: usb@4efe0000 {
compatible = "hpe,gxp-ehci", "generic-ehci";
- reg = <0xefe0000 0x100>;
+ reg = <0x4efe0000 0x100>;
interrupts = <7>;
interrupt-parent = <&vic0>;
};
- st: timer@80 {
+ st: timer@40000080 {
compatible = "hpe,gxp-timer";
- reg = <0x80 0x16>;
+ reg = <0x40000080 0x16>;
interrupts = <0>;
interrupt-parent = <&vic0>;
clocks = <&iopclk>;
clock-names = "iop";
};
- usb1: usb@efe0100 {
+ usb1: usb@4efe0100 {
compatible = "hpe,gxp-ohci", "generic-ohci";
- reg = <0xefe0100 0x110>;
+ reg = <0x4efe0100 0x110>;
interrupts = <6>;
interrupt-parent = <&vic0>;
};
+
+ fan-controller@40000c10 {
+ compatible = "hpe,gxp-fan-ctrl";
+ reg = <0x40000c10 0x8>, <0x51000027 0x06>, <0x200070 0x04>;
+ reg-names = "base", "pl", "fn2";
+ };
};
};
};
--
2.17.1
next prev parent reply other threads:[~2023-01-13 16:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-13 16:06 [PATCH v5 0/2] ARM: Add GXP Fan and SPI controllers nick.hawkins
2023-01-13 16:06 ` nick.hawkins [this message]
2023-01-25 8:07 ` [PATCH v5 1/2] ARM: dts: add GXP Support for fans and SPI Arnd Bergmann
2023-01-26 18:47 ` Hawkins, Nick
2023-01-13 16:06 ` [PATCH v5 2/2] ARM: multi_v7_defconfig: Add GXP Fan and SPI support nick.hawkins
2023-01-25 8:25 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230113160651.51201-2-nick.hawkins@hpe.com \
--to=nick.hawkins@hpe.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
--cc=verdun@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®