[PATCHv2] media: ov5640: Update last busy timestamp to reset autosuspend timer

[Andrey Skvortsov <andrej.skvortzov@gmail.com>]

Otherwise autosuspend delay doesn't work and power is cut off
immediately as device is freed.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
---

Changes since PATCHv1:
 * Removed pm_runtime_mask_last_busy call from ov5640_write_reg and ov5640_read_reg
   as suggested by Sakari Ailus
 * Updated diff against next-20230113

drivers/media/i2c/ov5640.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index e0f908af581b..24f4f395aad6 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -3316,6 +3316,7 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
+	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 	pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
 
 	return 0;
@@ -3391,6 +3392,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
+	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 	pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
 
 	return ret;
@@ -3710,8 +3712,10 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
 out:
 	mutex_unlock(&sensor->lock);
 
-	if (!enable || ret)
+	if (!enable || ret) {
+		pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
 		pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+	}
 
 	return ret;
 }
@@ -3912,6 +3916,7 @@ static int ov5640_probe(struct i2c_client *client)
 
 	pm_runtime_set_autosuspend_delay(dev, 1000);
 	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 
 	return 0;
-- 
2.39.0