From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
linux-spi@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 38/53] spi: spidev: fix a race condition when accessing spidev->spi
Date: Mon, 16 Jan 2023 09:01:38 -0500 [thread overview]
Message-ID: <20230116140154.114951-38-sashal@kernel.org> (raw)
In-Reply-To: <20230116140154.114951-1-sashal@kernel.org>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[ Upstream commit a720416d94634068951773cb9e9d6f1b73769e5b ]
There's a spinlock in place that is taken in file_operations callbacks
whenever we check if spidev->spi is still alive (not null). It's also
taken when spidev->spi is set to NULL in remove().
This however doesn't protect the code against driver unbind event while
one of the syscalls is still in progress. To that end we need a lock taken
continuously as long as we may still access spidev->spi. As both the file
ops and the remove callback are never called from interrupt context, we
can replace the spinlock with a mutex.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230106100719.196243-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spidev.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 6313e7d0cdf8..42aaaca67265 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -68,7 +68,7 @@ static_assert(N_SPI_MINORS > 0 && N_SPI_MINORS <= 256);
struct spidev_data {
dev_t devt;
- spinlock_t spi_lock;
+ struct mutex spi_lock;
struct spi_device *spi;
struct list_head device_entry;
@@ -95,9 +95,8 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
int status;
struct spi_device *spi;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spi = spidev->spi;
- spin_unlock_irq(&spidev->spi_lock);
if (spi == NULL)
status = -ESHUTDOWN;
@@ -107,6 +106,7 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
if (status == 0)
status = message->actual_length;
+ mutex_unlock(&spidev->spi_lock);
return status;
}
@@ -359,12 +359,12 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
* we issue this ioctl.
*/
spidev = filp->private_data;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spi = spi_dev_get(spidev->spi);
- spin_unlock_irq(&spidev->spi_lock);
-
- if (spi == NULL)
+ if (spi == NULL) {
+ mutex_unlock(&spidev->spi_lock);
return -ESHUTDOWN;
+ }
/* use the buffer lock here for triple duty:
* - prevent I/O (from us) so calling spi_setup() is safe;
@@ -508,6 +508,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
mutex_unlock(&spidev->buf_lock);
spi_dev_put(spi);
+ mutex_unlock(&spidev->spi_lock);
return retval;
}
@@ -529,12 +530,12 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
* we issue this ioctl.
*/
spidev = filp->private_data;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spi = spi_dev_get(spidev->spi);
- spin_unlock_irq(&spidev->spi_lock);
-
- if (spi == NULL)
+ if (spi == NULL) {
+ mutex_unlock(&spidev->spi_lock);
return -ESHUTDOWN;
+ }
/* SPI_IOC_MESSAGE needs the buffer locked "normally" */
mutex_lock(&spidev->buf_lock);
@@ -561,6 +562,7 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
done:
mutex_unlock(&spidev->buf_lock);
spi_dev_put(spi);
+ mutex_unlock(&spidev->spi_lock);
return retval;
}
@@ -640,10 +642,10 @@ static int spidev_release(struct inode *inode, struct file *filp)
spidev = filp->private_data;
filp->private_data = NULL;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
/* ... after we unbound from the underlying device? */
dofree = (spidev->spi == NULL);
- spin_unlock_irq(&spidev->spi_lock);
+ mutex_unlock(&spidev->spi_lock);
/* last close? */
spidev->users--;
@@ -776,7 +778,7 @@ static int spidev_probe(struct spi_device *spi)
/* Initialize the driver data */
spidev->spi = spi;
- spin_lock_init(&spidev->spi_lock);
+ mutex_init(&spidev->spi_lock);
mutex_init(&spidev->buf_lock);
INIT_LIST_HEAD(&spidev->device_entry);
@@ -821,9 +823,9 @@ static void spidev_remove(struct spi_device *spi)
/* prevent new opens */
mutex_lock(&device_list_lock);
/* make sure ops on existing fds can abort cleanly */
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spidev->spi = NULL;
- spin_unlock_irq(&spidev->spi_lock);
+ mutex_unlock(&spidev->spi_lock);
list_del(&spidev->device_entry);
device_destroy(spidev_class, spidev->devt);
--
2.35.1
next prev parent reply other threads:[~2023-01-16 14:07 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-16 14:01 [PATCH AUTOSEL 6.1 01/53] scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 02/53] ASoC: SOF: pm: Set target state earlier Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 03/53] ASoC: SOF: pm: Always tear down pipelines before DSP suspend Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 04/53] ASoC: SOF: Add FW state to debugfs Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 05/53] ASoC: amd: yc: Add Razer Blade 14 2022 into DMI table Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 06/53] spi: cadence: Fix busy cycles calculation Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 07/53] cpufreq: CPPC: Add u64 casts to avoid overflowing Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 08/53] cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 09/53] ASoC: mediatek: mt8186: support rt5682s_max98360 Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 10/53] ASoC: mediatek: mt8186: Add machine support for max98357a Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 11/53] ASoC: amd: yc: Add ASUS M5402RA into DMI table Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 12/53] ASoC: support machine driver with max98360 Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 13/53] kcsan: test: don't put the expect array on the stack Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 14/53] cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 15/53] ASoC: fsl_micfil: Correct the number of steps on SX controls Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 16/53] drm/msm/a6xx: Avoid gx gbit halt during rpm suspend Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 17/53] net: usb: cdc_ether: add support for Thales Cinterion PLS62-W modem Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 18/53] drm: Add orientation quirk for Lenovo ideapad D330-10IGL Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 19/53] s390/debug: add _ASM_S390_ prefix to header guard Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 20/53] s390: expicitly align _edata and _end symbols on page boundary Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 21/53] xen/pvcalls: free active map buffer on pvcalls_front_free_map Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 22/53] perf/x86/cstate: Add Meteor Lake support Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 23/53] perf/x86/msr: " Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 24/53] perf/x86/msr: Add Emerald Rapids Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 25/53] perf/x86/intel/uncore: " Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 26/53] arm64/mm: Define dummy pud_user_exec() when using 2-level page-table Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 27/53] nolibc: fix fd_set type Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 28/53] tools/nolibc: Fix S_ISxxx macros Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 29/53] tools/nolibc: fix missing includes causing build issues at -O0 Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 30/53] tools/nolibc: prevent gcc from making memset() loop over itself Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 31/53] cpufreq: armada-37xx: stop using 0 as NULL pointer Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 32/53] ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 33/53] ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 34/53] ACPI: resource: Skip IRQ override on Asus Expertbook B2402CBA Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 35/53] drm/amdkfd: Add sync after creating vram bo Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 36/53] drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 37/53] cifs: fix potential memory leaks in session setup Sasha Levin
2023-01-16 14:01 ` Sasha Levin [this message]
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 39/53] spi: spidev: remove debug messages that access spidev->spi without locking Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 40/53] KVM: s390: interrupt: use READ_ONCE() before cmpxchg() Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 41/53] scsi: hisi_sas: Use abort task set to reset SAS disks when discovered Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 42/53] scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 43/53] r8152: add vendor/device ID pair for Microsoft Devkit Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 44/53] platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 45/53] platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 46/53] platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 47/53] platform/x86: asus-wmi: Add quirk wmi_ignore_fan Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 48/53] platform/x86: asus-wmi: Ignore fan on E410MA Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 49/53] platform/x86: simatic-ipc: correct name of a model Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 50/53] platform/x86: simatic-ipc: add another model Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 51/53] lockref: stop doing cpu_relax in the cmpxchg loop Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 52/53] ata: pata_cs5535: Don't build on UML Sasha Levin
2023-01-16 14:01 ` [PATCH AUTOSEL 6.1 53/53] firmware: coreboot: Check size of table entry and use flex-array Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230116140154.114951-38-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®